PLA/Purac PLA Blend A/Purac 物性表
PLA/Purac PLA Blend A/Purac
规格用途
该料用途 | 通用 |
备注说明 | Homo PLA: general purposePLA blends based on monomers from Purac offer: Blend A: the key driver behind this improvement are PLLA homopolymers that have been nucleated with a small amount of PDLA homopolymers and a traditional nucleant (see blend A in the table below for more details). The increased heat performance of blend A was obtained without adding significant amounts of filler. |
技术参数
性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
注射 | 加工(熔体)温度 | 힑줇 到 | °C | 模具温度 | 到 힑 | °C |
物理性能 | 密度 | 힑.휆 | g/cm³ | ||
机械性能 | 拉伸模量 | | MPa | 拉伸应力 | 휆. | MPa | 拉伸应变 | 断裂 | . | % |
冲击性能 | 简支梁缺口冲击强度 | 23°C | . | kJ/m² | |
热性能 | 热变形温度 | 0.45 MPa, 未退火 | 힑 | °C |
温馨提示:此数据表中的信息由塑胶网从该材料的生产商处获得,塑胶网尽最大努力确保此数据的准确性,但是塑胶网对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。