HIPS 韩国LG 405AF 注塑级

联系人：贺义平

手机已验证

微信已验证

企业已验证

딩ꌙꡑ똂

ꌙ-똂

手机扫码快速拨号

速购通标准会员第4年

东莞市铭汇塑胶有限公司

联系人：贺义平 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：ꌙ-똂

手机号码：딩ꌙꡑ똂

所在地区：广东省东莞市

主营产品：工程橡胶·

扫一扫，加我微信

进入店铺

产品分类

LG Chemical HIPS 405AF PS, Flame Retardant

Description: Injection Molding, PS, Flame Retardant

Application: Electric Parts Requiring Flame Retardancy

CAS: 9003-55-8, 158725-44-1 and 1309-64-4

Information provided by LG Chemical

LG Chemical HIPS 405AF PS, Flame Retardant 物性表

物理性能	额定值 (公制)	额定值 (英制)	测试方法
比重	1.16 g/cc	1.16 g/cc	ASTM D792
处理	0.010	0.010	Injection Molding
线性成型收缩率,Flow	0.0040 - 0.0080 cm/cm @Thickness 3.20 mm	0.0040 - 0.0080 in/in @Thickness 0.126 in	ASTM D955
熔体流动速率	15 g/10 min @Load 5.00 kg, Temperature 200 °C	15 g/10 min @Load 11.0 lb, Temperature 392 °F	ASTM D1238

机械性能	额定值 (公制)	额定值 (英制)	测试方法
洛氏硬度（R 级）	90	90	ASTM D785
抗张强度(屈服)	25.5 MPa @Thickness 3.20 mm	3700 psi @Thickness 0.126 in	50mm/min; ASTM D638
伸长率 (断裂)	60 % @Thickness 3.20 mm	60 % @Thickness 0.126 in	50mm/min; ASTM D638
屈服伸长率	>= 5.0 % @Thickness 3.20 mm	>= 5.0 % @Thickness 0.126 in	50mm/min; ASTM D638
弯曲强度	43.1 MPa @Thickness 3.20 mm	6260 psi @Thickness 0.126 in	15mm/min; ASTM D790
弯曲模量	2.16 GPa @Thickness 3.20 mm	313 ksi @Thickness 0.126 in	15mm/min; ASTM D790
悬壁梁缺口冲击强度	0.392 J/cm @Thickness 3.20 mm, Temperature -30.0 °C	0.735 ft-lb/in @Thickness 0.126 in, Temperature -22.0 °F	ASTM D256
	0.392 J/cm @Thickness 6.40 mm, Temperature -30.0 °C	0.735 ft-lb/in @Thickness 0.252 in, Temperature -22.0 °F	ASTM D256
	0.785 J/cm @Thickness 6.40 mm, Temperature 23.0 °C	1.47 ft-lb/in @Thickness 0.252 in, Temperature 73.4 °F	ASTM D256
	0.981 J/cm @Thickness 3.20 mm, Temperature 23.0 °C	1.84 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F	ASTM D256

电气性能	额定值 (公制)	额定值 (英制)	测试方法
耐电弧性	120 - 180 sec	120 - 180 sec	ASTM D495
相比耐漏电起痕指数(CTI)	400 - 600 V	400 - 600 V
热丝引燃 (HWI)	15 - 30 sec @Thickness >=1.50 mm	15 - 30 sec @Thickness >=0.0591 in
	15 - 30 sec @Thickness >=2.50 mm	15 - 30 sec @Thickness >=0.0984 in
	15 - 30 sec @Thickness >=3.00 mm	15 - 30 sec @Thickness >=0.118 in
高电弧燃烧指数(HAI)	>= 120 arcs @Thickness 1.50 mm	>= 120 arcs @Thickness 0.0591 in
	>= 120 arcs @Thickness 2.50 mm	>= 120 arcs @Thickness 0.0984 in
	>= 120 arcs @Thickness 3.00 mm	>= 120 arcs @Thickness 0.118 in
高压电弧跟踪率，HVTR	10.0 - 25.4 mm/min	0.394 - 1.00 in/min

热性能	额定值 (公制)	额定值 (英制)	测试方法
载荷下热变形温度(0.46 MPa)	82.0 °C @Thickness 6.40 mm	180 °F @Thickness 0.252 in	Unannealed; ASTM D648
载荷下热变形温度(1.8 MPa)	77.0 °C @Thickness 6.40 mm	171 °F @Thickness 0.252 in	Unannealed; ASTM D648
维卡软化温度	83.0 °C @Load 5.00 kg	181 °F @Load 11.0 lb	50°C/h; ASTM D1525
UL RTI	50.0 °C @Thickness >=1.50 mm	122 °F @Thickness >=0.0591 in
	50.0 °C @Thickness >=2.50 mm	122 °F @Thickness >=0.0984 in
	50.0 °C @Thickness >=3.00 mm	122 °F @Thickness >=0.118 in
UL RTI，机械冲击	50.0 °C @Thickness >=1.50 mm	122 °F @Thickness >=0.0591 in
	50.0 °C @Thickness >=2.50 mm	122 °F @Thickness >=0.0984 in
	50.0 °C @Thickness >=3.00 mm	122 °F @Thickness >=0.118 in
UL RTI，机械无冲击	50.0 °C @Thickness >=1.50 mm	122 °F @Thickness >=0.0591 in
	50.0 °C @Thickness >=2.50 mm	122 °F @Thickness >=0.0984 in
	50.0 °C @Thickness >=3.00 mm	122 °F @Thickness >=0.118 in
可燃性(UL94)	V-0 @Thickness >=1.50 mm	V-0 @Thickness >=0.0591 in
	V-0 @Thickness >=2.50 mm	V-0 @Thickness >=0.0984 in
	V-0 @Thickness >=3.00 mm	V-0 @Thickness >=0.118 in

加工性能	额定值 (公制)	额定值 (英制)	测试方法
料筒后部温度	180 - 200 °C	356 - 392 °F	Injection Molding
料筒中部温度	190 - 200 °C	374 - 392 °F	Injection Molding
料筒前部温度	200 - 210 °C	392 - 410 °F	Injection Molding
射嘴温度	200 - 230 °C	392 - 446 °F	Injection Molding
加工（熔体）温度	200 - 230 °C	392 - 446 °F	Injection Molding
模具温度	40.0 - 60.0 °C	104 - 140 °F	Injection Molding
干燥温度	60.0 - 70.0 °C	140 - 158 °F	Injection Molding
干燥时间	3.00 - 4.00 hour	3.00 - 4.00 hour	Injection Molding
背压	29.4 - 58.8 MPa	4260 - 8530 psi	Injection Molding
螺杆转速	30 - 60 rpm	30 - 60 rpm	Injection Molding