【切换城市】
7×24小时咨询热线：400-668-0255 我的塑胶网 会员商务室 帮助中心
苏州寅旭塑化有限公司
苏州寅旭塑化有限公司
  • 入驻年限：6年
  • 所 在 地：江苏省 苏州市
  • 主营产品： 塑胶原料及产品 化工原料及产品
进入店铺 我要询盘
vip

进入移动商铺

免费会员第 6 年 vip
苏州寅旭塑化有限公司
主营产品： 塑胶原料及产品, 化工原料及产品,
如实描述 用心服务 品质保障
便ꎂ便便영便稜
当前位置： 首页 > 产品大全 > PA6 > PA6 > 供应杜邦 73G50HSLA 50%玻纤增强

供应杜邦 73G50HSLA 50%玻纤增强

价格 ￥30.00/KG
起订量 ≥25
所在地 江苏 苏州 可售量 10000KG
联系人： 邓 先生
身份已验证
手机已验证
微信已验证

便ꎂ便便영便稜

便-便ꎂ便便영便稜

手机扫码快速拨号

手机扫码

产品推荐

免费会员 第6年

苏州寅旭塑化有限公司

联 系 人：邓 先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：便-便ꎂ便便영便稜

手机号码：便ꎂ便便영便稜

公司官网： http://18114591336.51pla.com

所在地区：江苏省 苏州市

主营产品： 塑胶原料及产品, 化工原料及产品,

二维码

扫一扫，加我微信

进入店铺
产品分类
最新产品
商品详情 联系方式

进入手机版

基本参数

牌号 73G50HSLA 厂商 美国杜邦
填充 50%玻纤 包装 25KG
特性 高刚性 种类 PA6
热性能 热稳定 现货 可定制

Zytel? 73G50HSLA BK416

NYLON RESIN
PA6-GF50
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Pellets
Additives
Lubricants, Release agent
Special characteristics
Heat stabilized or stable to heat
PRODUCT TEXT

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

 

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

 

Zytel? 73G50HSLA BK416 is a 50% glass fiber reinforced, heat stabilized, lubricated, polyamide 6 resin for injection molding.  It has an excellent surface appearance and gloss.

PRODUCT INFORMATION

DRY/COND.
TEST NORM
Resin Identification
PA6-GF50
ISO 1043
Part Marking Code
>PA6-GF50<
ISO 11469
ISO designation
ISO 16396-PA6,GF50,M1CGHR,S09-160
-

REGULATORY

Regulatory Information Sheet (RIS)
SVHC Declaration
ZYTEL - SVHC Statement
Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melt mass-flow rate
77/*
g/10min
ISO 1133
Melt mass-flow rate, Temperature
275/*
°C
ISO 1133
Melt mass-flow rate, Load
5/*
kg
ISO 1133
Molding shrinkage, parallel
0.1/-
%
ISO 294-4, 2577
Molding shrinkage, normal
0.7/-
%
ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Tensile Modulus
16000/12000
MPa
ISO 527-1/-2
Stress at break
230/150
MPa
ISO 527-1/-2
Strain at break
2.2/4
%
ISO 527-1/-2
Flexural Modulus
15000/10000
MPa
ISO 178
Flexural Strength
400/240
MPa
ISO 178
Flexural Stress at 3.5%
-/225
MPa
ISO 178
Tensile creep modulus, 1h
*/9500
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/7500
MPa
ISO 899-1
Charpy impact strength, 73°F
100/100
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
100/90
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
21/22
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
19/18
kJ/m2
ISO 179/1eA
Poisson's ratio
0.33/0.33
-
-

THERMAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
219/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
60/-
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
212/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
219/*
°C
ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf
215/*
°C
ISO 306
Coeff. of linear therm. expansion, parallel
15/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
100/*
E-6/K
ISO 11359-1/-2
Thermal conductivity of melt
0.26
W/(m K)
-
Spec. heat capacity of melt
2050
J/(kg K)
-

FLAMMABILITY

DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
31
mm/min
ISO 3795 (FMVSS 302)

ELECTRICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Surface resistivity
*/5E12
Ohm
IEC 62631-3-2
Comparative tracking index
380/-
-
IEC 60112

OTHER PROPERTIES

DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
1.6/*
%
Sim. to ISO 62
Water absorption, 80mil
4.5/*
%
Sim. to ISO 62
Density
1580/-
kg/m3
ISO 1183
Density of melt
1240
kg/m3
-

INJECTION

DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
270
°C
Min. melt temperature
260
°C
Max. melt temperature
280
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm

CHEMICAL MEDIA RESISTANCE

Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C

DIAGRAMS

Viscosity-shear rate Zytel? 73G50HSLA BK416 1E2 1E3 1E4 Shear rate in 1/s 1E1 1E2 1E3 Viscosity in Pa.s 260 °C 270 °C 280 °C
Shearstress-shear rate Zytel? 73G50HSLA BK416 1E2 1E3 1E4 Shear rate in 1/s 1E4 1E5 1E6 Shearstress in Pa 260 °C 270 °C 280 °C
Dynamic Tensile modulus-temperature Zytel? 73G50HSLA BK416 (dry) -100 0 100 200 Temperature in °C 1E2 1E3 1E4 1E5 Dyn. Tensile modulus in MPa 0 0.05 0.1 0.15 tan d 1E0 1E1 1E2 1E3 E'' MPa
Stress-strain Zytel? 73G50HSLA BK416 (dry) 0 2 4 6 8 Strain in % 0 100 200 300 Stress in MPa -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Stress-strain Zytel? 73G50HSLA BK416 (cond.) 0 2 4 6 Strain in % 0 100 200 300 Stress in MPa -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Secant modulus-strain Zytel? 73G50HSLA BK416 (dry) 0 2 4 6 8 Strain in % 0 10000 20000 30000 Secant modulus in MPa -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Secant modulus-strain Zytel? 73G50HSLA BK416 (cond.) 0 1 2 3 4 5 6 Strain in % 0 5000 10000 15000 20000 Secant modulus in MPa -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Specific volume-temperature (pvT) Zytel? 73G50HSLA BK416 0 100 200 300 Temperature in °C 0.65 0.7 0.75 0.8 0.85 Spec. volume in E-3 m3/kg 0.1 MPa 40 MPa 120 MPa 200 MPa
Tensile modulus-temperature Zytel? 73G50HSLA BK416 (dry) -100 0 100 200 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Tensile modulus-temperature Zytel? 73G50HSLA BK416 (cond.) -50 0 50 100 150 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Coeff. of linear thermal expansion Zytel? 73G50HSLA BK416 -40 -20 0 20 40 60 Temperature in °C -5 0 5 10 15 20 25 CLTEp in E-6/K 40 60 80 100 120 140 160 CLTEn in E-6/K
LTHA-Stress at Break 4 mm Zytel? 73G50HSLA BK416 0 5000 10000 15000 Time in h 0 100 200 300 StressB in MPa 130 °C 140 °C 160 °C 180 °C 200 °C 220 °C



该企业其他产品

  • 供应 英力士ABS Lustran 556 低光泽 ￥15.5元

  • ABS EGP-7 英力士ABS￥15.5元

  • 英力士高光ABS Lustran 451 ￥18.5元

  • 供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元

  • 锦湖ABS HU600PF喷涂级￥21.5元

  • 锦湖ABS H2938L耐热喷涂级￥21.5元

  • 锦湖ABS HU651耐热耐候￥21.5元

  • 锦湖ABS HU601耐热￥21.5元

供应杜邦 73G50HSLA 50%玻纤增强相关产品

猜你在找

免责声明：以上展示的供应杜邦 73G50HSLA 50%玻纤增强信息由苏州寅旭塑化有限公司自行提供，内容的真实性、准确性和合法性由发布企业负责， 全球塑胶网对此不承担责任。
风险防范建议：为保障您的利益，建议优先选择速购通会员
手机版：供应杜邦 73G50HSLA 50%玻纤增强
更新产品链接为：https://www.51pla.com/html/sellinfo/435/43566656.htm

全球塑胶网 杭州酷软科技有限公司 版权所有 © 2008-2020 www.51pla.com 浙ICP备13013211号 SEO 找商网

咨询热线:400-668-0255 公司传真：0571-87205660

浙公网安备 33010602002378号