PUR-脂肪族/TDI/BL 16/Chemtura Corporation 物性表
PUR-脂肪族/TDI/BL 16/Chemtura Corporation
规格用途
该料用途 | 涂层应用; 粘合剂; 织物涂料 |
备注说明 | ADIPRENE BL-16 is a liquid urethane elastomer with blocked isocyanate curing sites, which can be activated by heating. The blocked curing sites allow protracted storage of the polymer in the presence of moisture and active vulcanizing agents. Diamine-cured ADIPRENE BL-16 yields vulcanizates essentially equivalent to those of ADIPRENE L-167.These products have high tensile strength and excellent oil and abrasion resistance. ADIPRENE BL-16 is well suited as a vehicle for abrasion resistant coatings for fabric and rubber, and for solvent-resistant adhesives. |
技术参数
性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
Uncured Properties | 固化时间 | 130°C | .퀙 | hr | |
物理性能 | 密度 / 比重 2 | ASTM D792 | .퀙 到 .퀙 | g/cm³ | |
硬度 | 肖氏硬度 | ASTM D2240 | 邵氏 A | ꠓ늘 | 邵氏 D | |
弹性体 | 拉伸应力 | ASTM D412 | 100%应变 | . | MPa | 300%应变 | 늘. | MPa | 抗张强度 | ASTM D412 | 삘.늘 | MPa | 伸长率 | ASTM D412 | 断裂 | 퀙 | % |
热固性 | 热固组件 | 树脂 | 按重量计算的混合比: 퀙퀙 | 硬化法 | 按重量计算的混合比: 늘 |
老化 | 体积变化 | 50°C, 168 hr, ASTM 标准油(3号) | . | % | 50°C, 168 hr, 在基准燃料B中 | 늘 | % |
充模分析 | 布络克菲尔德粘度 | 50°C | 삘.퀙 到 .퀙 | Pa·s | Isocyanate Content | Blocked | . 到 . | % | Free | < 퀙.늘 | % |
机械性能 | 泰伯耐磨性 | 1000 Cycles, 1000 g, H-22 转轮 | 늘 | mg |
温馨提示:此数据表中的信息由塑胶网从该材料的生产商处获得,塑胶网尽最大努力确保此数据的准确性,但是塑胶网对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。