氟橡胶/Boda BDTL30P/Chenguang Fluoro & Silicone Elastomers Co., Ltd. 物性表
氟橡胶/Boda BDTL30P/Chenguang Fluoro & Silicone Elastomers Co., Ltd.
规格用途
| 该料用途 | 混料 |
| 备注说明 | BDTL30P is a high viscosity curative incorporated fluoroelastomer terpolymer.This grade is well suited for application where good flowability and superior low temperature flexibility than standard terpolymers are required. BDTL30P can be compounded to meet the major fluoroelastomer specifications.BDTL30P can be used for injection, calendering, extrusion and compression molding of articles. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 物理性能 | 密度 / 比重 | .쑳弄 | g/cm³ | 门尼粘度 | ML 1+10, 121°C | ꁅ弄 | MU | 氟含量 | 끖끖 | % | 可溶性 | 솔 윁 론 퍰 |
| 硬度 | 肖氏硬度 | ASTM D2240 | 邵氏 A | 됙끖 | |
| 弹性体 | 抗张强度 | ASTM D412 | 屈服 | ꁅ.弄 | MPa | 伸长率 | ASTM D412 | 断裂 | 띣띣弄 | % | 压缩永久变形 | ASTM D395B | 200°C, 70 hr | 띣끖 | % | MH | 177°C | .쑳ꥶ | N·m | ML | 177°C | 弄.띣弄弄 | N·m | t'90 | 177°C | 띣.ꁅ | min | ts2 | 177°C | 띣.ꁅ | min |
| 热性能 | 脆化温度 | -땱弄.弄 | °C | Tr10 | -쑳 | °C |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
