PPSU/P XRO/Ensinger Inc. 物性表
PPSU/P XRO/Ensinger Inc.
规格用途
| 该料用途 | 医疗/护理用品; 外科器械 |
| 备注说明 | Ensinger Industries launches its new line of xray opaque, XRO series, thermoplastic shapes with TECASON™P XRO. A radio opacifer is added to the standard line of colored PPSU extruded rod for orthopedic sizing trials and other instrument devices allowing for clear visibility of the component on fluoroscopy and xray.This accommodates some of the new challenges created by minimally invasive and image guided surgery. TECASON™P XRO has been tested to the requirements of IS0 10993 for external communication devices intended for less than 24 hour contact with tissue, bone and dentin. These tes tsinclude: Maximization / Sensitization Testing, Cytotoxicity, Intracutaneous Test, Acute Systemic Toxicity Test and the Hemolysis Test.TECASON™ P XRO has been formulated to allow clear visibility of an instrument on fluoroscopy and xray during minimally invasive and image guided surgery. Thus providing an exceptional benefit to the user. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 物理性能 | 密度 / 比重 | ASTM D792 | 쉸.랉 | g/cm³ | 吸水率 | ASTM D570 | 24 hr, 23°C | .쉸 | % |
| 硬度 | 洛氏硬度 | ASTM D785 | M 级, 23°C | | |
| 机械性能 | 拉伸模量 | ASTM D638 | 23°C | | MPa | 抗张强度 | ASTM D638 | 屈服, 23°C | 씨.랉 | MPa | 伸长率 | ASTM D638 | 断裂, 23°C | 랉숄 | % | 弯曲模量 | ASTM D790 | 23°C | ꉳ쉸 | MPa | 弯曲强度 | ASTM D790 | 23°C | 쉸ꉳ | MPa | 压缩模量 | ASTM D695 | 쉸숄숄 | MPa | 压缩强度 | ASTM D695 | 10% 应变, 23°C | ꉳ.숄 | MPa |
| 冲击性能 | 悬壁梁缺口冲击强度 | ASTM D256 | 23°C | 떂숄 | J/m |
| 热性能 | Service Temperature - Long Term | 쉸ꉳ | °C |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
