TPE/T & T Marketing TPE 5595R/T & T Marketing, Inc. 物性表
TPE/T & T Marketing TPE 5595R/T & T Marketing, Inc.
规格用途
| 该料用途 | Flame Retardant Insulation; 电线护套; 电线电缆应用; 电缆护套; 绝缘材料 |
| 备注说明 | TPE 5595R is a natural, olefin-based thermoplastic elastomer (TPE) intended for wire and cable insulation and jacketing applications where high temperature performance and excellent flame resistance are required. TPE 5595R complies with "Restriction of Hazardous Substances" Directive, Citation 2002-95-EC, commonly known as RoHS without exemption. TPE 5595R does not contain decabromodiphenyl oxide. TPE 5595R exhibits excellent wet and dry electrical properties and superior chemical resistance. It also provides good resistance to abrasion, impact and crush. TPE 5595R also exhibits superior low temperature properties as demonstrated by it passing cold bend and impact testing at -50°C.TPE 5595R contains a halogen-based, flame retardant additive package designed to reduce normal PE flame spread characteristics and achieve a VW-1 flame resistant rating on 14 AWG wires and larger. It also offers good extrusion processing characteristics on either conventional polyethylene or PVC extrusion lines. In addition, TPE 5595R contains a UV stabilization additive package that provides effective long-term UV weather resistance.TPE 5595R is readily pigmented to a variety of colors using standard wire and cable color concentrates designed for thermoplastic or crosslinked polyolefins.ApplicationTPE 5595R is intended for 125°C UL rated appliance wire and other flame retardant insulation or jacketing constructions. Specifically, this product is rated a V-0 by UL Standard 94 at a minimum thickness of 0.062 inches. TPE 5595R is capable of achieving a VW-1 flame resistance on 14 AWG or larger conductors as per UL Standard 1581. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 物理性能 | 密度 / 比重 | ASTM D792 | .왲 | g/cm³ | |
| 硬度 | 肖氏硬度 | ASTM D2240 | 邵氏 A, 0.762 mm | 줆왲 | 邵氏 D, 0.762 mm | 뜶 |
| 弹性体 | 抗张强度 | ASTM D412 | 0.762 mm | 줆.큱 | MPa | 伸长率 | ASTM D412 | 断裂, 0.762 mm | 呂큱큱 | % |
| 热性能 | 脆化温度 | ASTM D746 | < -뜶.呂 | °C | |
| 老化 | 拉伸强度保持率 - 7 days at 136°C | UL 1581 | 762.0 µm | > 줆큱 | % | 伸长保持率 - 7 days at 136°C | UL 1581 | 762.0 µm | > 줆큱 | % |
| 可燃性 | UL 阻燃等级 | UL 94 | 뤤-큱 | 极限氧指数 | ASTM D2863 | | % |
| 挤出 | 料筒1区温度 | | °C | 料筒2区温度 | 줆줆 | °C | 料筒3区温度 | 큱뜶 | °C | 料筒4区温度 | 큱 | °C | 熔体温度 | 큱 | °C | 口模温度 | 큱 到 왲 | °C | 挤出机螺杆长径比L / D | 뜶: | 挤出机螺杆压缩比 | .녔 Ꜧ뀦 왲.: |
| 电气性能 | 体积电阻率 | ASTM D257 | 1.91 mm | .呂쉡+呂 | ohms·cm | 介电强度 | ASTM D149 | 1.91 mm | 呂 | kV/mm | 介电常数 | ASTM D150 | 1.91 mm, 60 Hz | .뜶큱 | 耗散因数 | ASTM D150 | 1.91 mm, 60 Hz | .녔쉡-왲 |
| 机械性能 | 弯曲模量 | ASTM D790 | 0.762 mm | 왲줆 | MPa |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
