TPE/600500 A01/HEXPOL TPE 物性表
TPE/600500 A01/HEXPOL TPE
规格用途
| 备注说明 | Dryflex A thermoplastic elastomer (TPE) bondable grades, primarily based on SBS and SEBS, increase freedom of design and open up a vast range of application opportunities.It used to be a complex and costly affair producing details made of thermoplastics that showed soft-touch qualities or had integrated seals. With Dryflex A TPEs, since the materials are bonded together at the production stage, no separate primer or adhesive is needed. This makes the process faster and more cost-effective than if the two parts were assembled together after each had been produced separately, or bonded mechanically, which often requires some modification to the design.Primarily a TPE is used as the soft component. Dryflex A bondable grades can be co-extruded or overmoulded with a variety of engineering plastics.Dryflex A grades are available in black or natural and can easily be coloured. These thermoplastic elastomers form excellent bonds onto PP, PE, PA, ABS, PC, PS, PMMA, ASA, SAN and their blends. Polyamides and ABS may be either reinforced or non-reinforced yet still bond extremely well to Dryflex. It is easy to achieve excellent bonding to PP, even using standard TPE materials, while other thermoplastics require some modification of the TPE material to optimise bonding. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 注射 | 加工（熔体）温度 | 혁혁 到 혁풂 | °C | ||
| 物理性能 | 密度 / 比重 | ASTM D792 | ꌙ.ꌙ줗 | g/cm³ | |
| 硬度 | 肖氏硬度 | ASTM D2240 | 邵氏 A | | |
| 弹性体 | 撕裂强度 | ASTM D624 | 혁풂. | kN/m | |
| 热性能 | Service Temperature | - 到 ꌙ혁 | °C | Peel Force | ASTM D903 | 팙ꘈꐕ퍑얁퉸ꐕ |
| 机械性能 | 抗张强度 | ASTM D638 | -- | 풂. | MPa | 100% 应变 | 혁. | MPa | 300% 应变 | 풂. | MPa | 伸长率 | ASTM D638 | 断裂 | 륖 | % |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
