尼龙66/ST/Ensinger Inc. 物性表
尼龙66/ST/Ensinger Inc.
规格用途
| 该料用途 | 工业应用; 汽车领域的应用; 金属取代; 阀门/阀门部件 |
| 备注说明 | Nylon was the first engineering resin. It has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon has outstanding wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. However, nylon's one weakness is a propensity to absorb moisture and thus have poor dimensional stability.TECAMID® has an excellent balance of properties which make it an ideal material for metal replacement in applications such as automotive parts, industrial valves, railway tie insulators, and other industry uses whose design requirements include high strength, toughness, and weight reduction.Type 6/6 nylon. Super Tough nylon. Increased impact resistance and toughness over Tecamid® 6/6. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 物理性能 | 密度 / 比重 | ASTM D792 | ꙑ. | g/cm³ | 吸水率 | ASTM D570 | 24 hr, 23°C | .낓 | % | 饱和, 23°C | .옹 | % |
| 硬度 | 洛氏硬度 | ASTM D785 | R 级, 23°C | ꙑꙑ | |
| 热性能 | 载荷下热变形温度 | ASTM D648 | 0.45 MPa, 未退火 | ꙑ퍠옹 | °C | 1.8 MPa, 未退火 | 낓.꜕ | °C | 熔融温度 | ASTM D2133 | | °C | 线形热膨胀系数 - 流动 | ASTM D696 | ꙑ.-낓 | cm/cm/°C | Service Temperature - Long Term | 퍠 | °C |
| 可燃性 | UL 阻燃等级 | UL 94 | 0.8 mm | ꊄꅹ | |
| 机械性能 | 拉伸模量 | ASTM D638 | 23°C | ꙑ꜕ | MPa | 抗张强度 | ASTM D638 | 屈服, 23°C | 퍠ꙑ.옹 | MPa | 伸长率 | ASTM D638 | 断裂, 23°C | 옹퍠 | % | 弯曲模量 | ASTM D790 | 23°C | ꙑ퍠꜕ | MPa | 弯曲强度 | ASTM D790 | 23°C | .ꙑ | MPa | 摩擦系数 | ASTM D1894 | Dynamic | . | 磨损因数 | ASTM D3702 | ꄉ | 10^-8 mm³/N·m |
| 冲击性能 | 无缺口悬臂梁冲击 | ASTM D256 | 23°C | 낓ꙑ | J/m |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
