TPE/502450S/HEXPOL TPE 物性表
TPE/502450S/HEXPOL TPE
规格用途
| 备注说明 | The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 注射 | 加工（熔体）温度 | ꝉ앀꜐ 到 ꝉ꜐ | °C | ||
| 物理性能 | 密度 / 比重 | ASTM D792 | ꜐.앀꜐ | g/cm³ | 熔流率（熔体流动速率） | ASTM D1238 | 190°C/2.16 kg | ꝉ.꜐ | g/10 min | 收缩率 | ꜐.앀꜐ 到 .꜐ | % |
| 硬度 | 肖氏硬度 | ASTM D2240 | 邵氏 A | ꘒ숐 | |
| 弹性体 | 撕裂强度 | ASTM D624 | ꝉ앀.꜐ | kN/m | 压缩永久变形 | ASTM D395 | 23°C, 72 hr | ꝉ꜐ | % |
| 热性能 | Service Temperature | -숐꜐ 到 ꝉ숐 | °C | ||
| 机械性能 | 抗张强度 | ASTM D638 | -- | .꜐꜐ | MPa | 100% 应变 | ꝉ.꜐꜐ | MPa | 300% 应变 | .꜐꜐ | MPa | 伸长率 | ASTM D638 | 断裂 | > ꜐꜐ | % |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
