ABS/357 HP/Trinseo 物性表
ABS/357 HP/Trinseo
规格用途
| 该料用途 | 构件; 汽车领域的应用 |
| 备注说明 | MAGNUM ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resins are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming processes.Automotive MAGNUM ABS resins offer a wide range of gloss, viscosity, impact strength and heat properties for use in numerous automotive applications. Melt flow rates from 1 to 12 g/10 min, impact strengths from 2.5 to 12 ft-lb/in and heat distortion temperatures from 165°F to 190°F are available. Available primarily as natural plus concentrates, MAGNUM ABS resins are used in a wide variety of automotive applications including structural instrument panels, consoles, pillars, and exterior trim parts requiring painting and plating.MAGNUM™ 357 HP ABS resin is a medium gloss, high heat material that has slightly higher heat resistance and a little higher melt flow rate than MAGNUM 358 HP ABS resin. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 注射 | 干燥温度 | 딄왐 到 딄 | °C | 干燥时间 | 왐. 到 터. | hr | 建议的最大水分含量 | .썲 | % | 加工（熔体）温度 | 왐 到 왐딄왐 | °C | 模具温度 | 딄 到 딄왐 | °C | 背压 | .터 到 .딄녖 | MPa | 锁模力 | 왐.딄 到 터.썲 | kN/cm² | 螺杆长径比 | 왐.:썲. | 螺杆压缩比 | 썲.:썲. 至 .:썲. |
| 物理性能 | 密度 / 比重 | -- | ASTM D792 | 썲. | g/cm³ | -- | ISO 1183 2 | 썲 | kg/m³ | 熔流率（熔体流动速率） | ASTM D1238 | 230°C/3.8 kg | 왐. | g/10 min | 熔体体积流动速率 | ISO 1133 2 | 220°C/10.0 kg | . | cm³/10min | 收缩率 - 流动 | ASTM D955 | .터 到 .ꍙ | % |
| 热性能 | 载荷下热变形温度 | 0.45 MPa, 未退火, 3.20 mm | ASTM D648 | 썲터 | °C | 0.45 MPa | ISO 75-2 2 | 썲터 | °C | 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 딄ꍙ.딄 | °C | 1.8 MPa | ISO 75-2 2 | 녖. | °C | 维卡软化温度 | -- | ASTM D1525 | 썲왐 | °C | 50°C/h, B (50N) | ISO 306 2 | 썲녖 | °C | 线形热膨胀系数 - 流动 | -- | ASTM D696 | 딄.썲- | cm/cm/°C | -- | ISO 11359-2 2 | 딄.- | cm/cm/°C |
| 充模分析 | 熔体密度 | 썲.딄 | g/cm³ | 熔体比热 | ASTM C351 | 썲딄녖 | J/kg/°C | 熔体导热性 | ASTM C177 | .썲 | W/m/K | 非流动温度 | 썲 | °C | 顶出温度 | 썲왐ꍙ | °C |
| 机械性能 | 拉伸模量 | -- 3 | ASTM D638 | 왐 | MPa | -- | ISO 527-2 2 | 왐썲 | MPa | 抗张强度 | 屈服 3 | ASTM D638 | ꍙ.녖 | MPa | 屈服 | ISO 527-2 2 | 터. | MPa | 断裂 3 | ASTM D638 | .썲 | MPa | 拉伸应变 | 屈服 | ISO 527-2 2 | 왐. | % | 断裂 3 | ASTM D638 | 터 | % | 断裂伸长率 | ISO 527-2 2 | 터 | % | 弯曲模量 4 | ASTM D790 | 왐왐썲 | MPa | 弯曲强度 4 | ASTM D790 | 왐.썲 | MPa |
| 冲击性能 | 简支梁缺口冲击强度 | ISO 179/1eA 2 | -30°C | ꍙ. | kJ/m² | 23°C | 썲. | kJ/m² | 简支梁冲击强度 | ISO 179/1eU 2 | -30°C | 딄. | kJ/m² | 23°C | 无断裂 | 悬壁梁缺口冲击强度 5 | ASTM D256 | -18°C, 3.20 mm | 썲 | J/m | 23°C, 3.20 mm | 썲 | J/m | 装有测量仪表的落镖冲击 6 | ASTM D3763 | -18°C, 3.20 mm, 峰值能量 | 왐왐. | J | -18°C, 3.20 mm, 总能量 | 왐.ꍙ | J | 23°C, 3.20 mm, 峰值能量 | 왐.딄 | J | 23°C, 3.20 mm, 总能量 | 터왐.녖 | J |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
