CAP/Propionate 384A4000016 Clear, Trsp/Eastman Chemical Company 物性表
CAP/Propionate 384A4000016 Clear, Trsp/Eastman Chemical Company
规格用途
| 该料用途 | 眼镜 |
| 备注说明 | Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 384-16 contains an ultra-violet inhibitor(UVI) and has a plasticizer level of 16%. It is resistant to high temperatures. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 物理性能 | 密度 / 比重 | ASTM D792 | 얄.얄 | g/cm³ | 收缩率 - 流动 | ASTM D955 | 쑗.잓쑗 到 쑗.슖쑗 | % | 吸水率 | ASTM D570 | 24 hr, 23°C | 얄. | % |
| 硬度 | 洛氏硬度 | ASTM D785 | R 级, 23°C | 슖횇 | |
| 光学性能 | 折射率 | ASTM D542 | 얄.슖쑗 到 얄.쑗 | 透射率 | ASTM D1003 | 1520 µm | > 쑗.쑗 | % | 雾度 | ASTM D1003 | 1520 µm | < 횇.눖 | % | Soluble Matter Loss | ASTM D570 | 23°C | 쑗.얄쑗 | % | Weight Loss on Heating - 72 hrs | ASTM D1562 | 80°C | 얄.쀷 | % |
| 热性能 | 载荷下热变形温度 2 | ASTM D648 | 0.45 MPa, 退火 | 횇쑗.쑗 | °C | 1.8 MPa, 退火 | 잓.쑗 | °C | 维卡软化温度 2 | ASTM D1525 | 잓.쑗 | °C | 线形热膨胀系数 - 流动 | ASTM D696 | 23°C | 잓.쑗-눖 | cm/cm/°C | 比热 | DSC | 23°C | 얄잓슖쑗 到 얄슖쑗 | J/kg/°C | 导热系数 | ASTM C177 | 23°C | 쑗.잓눖 | W/m/K |
| 电气性能 | 介电强度 | ASTM D149 | 23°C | 얄잓 到 얄 | kV/mm | 介电常数 | ASTM D150 | 23°C, 1 MHz | 쀷.쀷쑗 到 쀷.횇쑗 | 耗散因数 | ASTM D150 | 23°C, 1 MHz | 쑗.쑗얄쑗 到 쑗.얄눖 |
| 机械性能 | 抗张强度 | ASTM D638 | 屈服, 23°C | 잓슖. | MPa | 断裂, 23°C | 쀷쑗.쀷 | MPa | 伸长率 | ASTM D638 | 断裂, 23°C | 눖 | % | 弯曲模量 | ASTM D790 | 23°C | 얄잓쑗 | MPa | 弯曲强度 | ASTM D790 | 屈服, 23°C | 쀷눖.잓 | MPa |
| 冲击性能 | 悬壁梁缺口冲击强度 | ASTM D256 | -40°C | 얄잓쑗 | J/m | 23°C | > 눖쀷쑗 | J/m |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
