搜索结果列表 共搜到关于 EMA 的物性记录约 20＋条,本页只展示最多20条记录
EMA|Generic EMA|Generic
备注说明：
This data represents typical values that have been calculated from all products classified as: Generic EMAThis information is provided for comparative purposes only.
EMA|EMA 2-20|Marco Polo International, Inc.
特性：
备注说明：
Processing: Extrusion and MoldingApplications: Extruded embossed sheets, food and medical applications, packaging bottles, ampoule trays, caps and closures.MARPOL® GPPS 1.5 grade can - in principle - be used in food contact applications in the USA (FDA) and in Canada (HBP). Migration or use limitati...more.
EMA|24MA005|Arkema
用途：
特性：
备注说明：
LOTRYL® 24MA005 is a random copolymer of Ethylene and Methyl Acrylate produced by high-pressure radicalar polymerization process.ApplicationsDue to the methyl acrylate content, LOTRYL® 24MA005 can be used for applications where softness, flexibility and polarity are required. Typical applications ar...more.
EMA|24MA02|Arkema
用途：
特性：
备注说明：
LOTRYL® 24MA02 is a random copolymer of Ethylene and Methyl Acrylate produced by high-pressure radicalar polymerization process.ApplicationsDue to its high methyl acrylate content, LOTRYL® 24MA02 can be used for applications where softness, flexibility and polarity are required. Typical applications...more.
EMA|18MA02|Arkema
用途：
特性：
备注说明：
LOTRYL® 18MA02 is a random copolymer of Ethylene and Methyl Acrylate produced by high-pressure radicalar polymerization process.ApplicationsDue to the methyl acrylate content, LOTRYL® 18MA02 can be used for applications where softness, flexibility and polarity are required. Typical applications are ...more.
EMA|20MA08|Arkema
用途：
特性：
备注说明：
LOTRYL® 20MA08 is a random copolymer of Ethylene and Methyl Acrylate produced by high-pressure radicalar polymerization process.ApplicationsDue to the methyl acrylate content, LOTRYL® 20MA08 can be used for applications where softness, flexibility and polarity are required. Typical applications are ...more.
EMA|29MA03|Arkema
用途：
特性：
备注说明：
LOTRYL® 29MA03 is a random copolymer of Ethylene and Methyl Acrylate produced by high-pressure radicalar polymerization process.ApplicationsDue to the methyl acrylate content, LOTRYL® 29MA03 can be used for applications where softness, flexibility and polarity are required. Typical applications are ...more.
EMA|BESTPEEL 2012|Arkema
用途：
特性：
备注说明：
LOTRYL® BESTPEEL 2012 is a ready-to-use thermoplastic composition designed to make peelable heat seal layers onto various substrates. The base resin is a random copolymer of ethylene and methyl acrylate, polymerized by high-pressure process in autoclave reactor. Modification is introduced to ensure ...more.
EMA|BESTPEEL 2407|Arkema
用途：
特性：
备注说明：
LOTRYL® BESTPEEL 2407 is a ready-to-use thermoplastic composition designed to make peelable heat seal layers onto various substrates. The base resin is a random copolymer of ethylene and methyl acrylate, polymerized by high-pressure process in autoclave reactor. Modification is introduced to ensure ...more.
EMA|TC 220 Molding|ExxonMobil
备注说明：
Optema TC 220是一种乙烯-丙烯酸甲酯共聚物，可用于特种粘合用途以及作为增韧剂用于工程聚合体。它可在最低200°F (93°C) 和最高600°F (315°C)下加工。
EMA|TC 120 ExCo|ExxonMobil
备注说明：
Optema TC 120是一种乙烯-丙烯酸甲酯共聚物，用于要求在聚乙烯、聚丙烯、尼龙 、聚二氯乙烯或其他基材之间具有良好粘合性的挤出涂覆、共挤涂覆和挤出复合。它能很好地平衡基材上的粘合性和与共挤低密度聚乙烯和乙烯醋酸乙烯酯共聚物 的夹层粘合性。它在共挤和挤出涂覆中是一种卓越的热密封层，但可能需要额外 的添加剂或工艺修正以避免冷却辊粘着。加工条件：在 260°C至300°C (500° F - 572°F)温度范围之间可获得卓越的挤出涂覆效果。建议加工温度不要高于32 0°C (608°F)。Optema EMA可在传统的挤出涂覆低密度聚乙烯用挤出设备上加工 。其广泛的热稳定范围提供了较宽的加...more.
EMA|SP2403|Westlake Chemical Corporation
用途：
特性：
备注说明：
EMAC resins adhere to and are compatible with a wide range of materials including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVdC, unplasticized PVC and other polar polymers. For use as heat seal layer, adhesive layer, or modifier for cost/performance enhancement. They are soft,...more.
EMA|GT7501|Westlake Chemical Corporation
用途：
备注说明：
Westlake GA7501 is an anhydride modified acrylate copolymer designed for extrusion coating and cast film tie layers. This resin is designed to function as a coextruded tie layer in multilayer applications where more heat resistance is required than typical acrylate polymers provide. Westlake GA7501 ...more.
EMA|SP1330|Westlake Chemical Corporation
用途：
特性：
备注说明：
EMAC resins adhere to and are compatible with a wide range of materials including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVdC, unplasticized PVC and other polar polymers. For use as heat seal layer, adhesive layer, or modifier for cost/performance enhancement. They are soft,...more.
EMA|SP2202|Westlake Chemical Corporation
用途：
特性：
备注说明：
Westlake EMAC® SP2202 is a 21.5% EMA copolymer designed for blown film, tie-layers, and extrusions where flexibility, compatibility, or low heat seal temperatures are required. SP2202 provides excellent adhesion to polyolefins, polyesters, and other polymers while providing outstanding low temperatu...more.
EMA|TC 120 Molding|ExxonMobil
备注说明：
Optema TC 120是一种乙烯-丙烯酸甲酯共聚物，可用作聚合体混料的抗冲改性剂或增容剂。Optema TC 120在625°F 下经过典型低密度聚乙烯造粒设备加工。
EMA|TC 114 Cast|ExxonMobil
备注说明：
Optema TC 114是一种乙烯-丙烯酸甲酯共聚物，专为使吹膜和流延膜用途具有挤出性能而开发。它无需额外的添加剂便可用于生产具有良好操作性的软弹性薄膜。OPTEMA TC 114 可用于生产厚度低于1.0密耳的薄膜。
EMA|TC 114 Blown|ExxonMobil
备注说明：
OPTEMA TC 114是一种乙烯-丙烯酸甲酯共聚物，专为使吹膜用途具有挤出性能而开发。它无需额外的添加剂便可用于生产具有良好操作性的软弹性薄膜。OPTEMA TC 114 可用于生产厚度低于1.0密耳的薄膜。
EMA|TC 110 Molding|ExxonMobil
备注说明：
Optema TC 110是一种乙烯-丙烯酸甲酯共聚物。Optema TC 110 可用于注射成型 它可用于合金、混合料或合成材料以提高冲击强度或降低模量。Optema TC 110可用于注射成型和挤出。
EMA|TC 110 Blown|ExxonMobil
备注说明：
Optema TC 110是一种乙烯-丙烯酸甲酯共聚物，专为吹膜要求的挤出性能而开发。它无需额外的添加剂便可用于生产具有良好操作性的软弹性薄膜。它可用于生产厚度低于1.0 mil的薄膜。
