LDPE/LE6607-PH/Borealis AG 物性表
LDPE/LE6607-PH/Borealis AG
规格用途
| 该料用途 | 吹塑成型应用; 瓶子 |
| 备注说明 | Bormed LE6607-PH is a resin intended for evaluation for use in Healthcare applications.Bormed LE6607-PH is an additive free low density polyethylene typically used in blow moulding articles. Material is characterised with a balanced in flexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6607PH can be steam sterilised at maximum 110 °C. Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy.ApplicationsBormed LE6607-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6607-PH . This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.Special features |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 物理性能 | 密度 | ISO 1183 | ꁘ.ꤶꌙ쥵 | g/cm³ | 熔流率（熔体流动速率） | ISO 1133 | 190°C/2.16 kg | ꁘ.ꁘ | g/10 min |
| 挤出 | 熔体温度 | 혧ꥣ 到 ꌙꁘꁘ | °C | ||
| 硬度 | 肖氏硬度 | ISO 868 | 邵氏 D | ꌙ | |
| 机械性能 | 拉伸模量 | ISO 527-2/1 | ꁘꁘ | MPa | 拉伸应力 | ISO 527-2/50 | 屈服 | 혧ꌙ.ꁘ | MPa | 拉伸应变 | ISO 527-2/50 | 断裂 | ꁘ | % | 弯曲模量 | ISO 178 | ꌙꤶꁘ | MPa |
| 热性能 | 热变形温度 | ISO 75-2/B | 0.45 MPa, 未退火 | 혧.ꁘ | °C |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
