HPPA/DW-4050/Solvay Specialty Polymers 物性表
HPPA/DW-4050/Solvay Specialty Polymers
规格用途
| 该料用途 | 电器用具; 食品服务领域 |
| 备注说明 | Omnix® DW-4050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption.Omnix® DW-4050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for food service applications using die-cast alloys.Omnix® DW-4050 is cleared for use under United States Food and Drug Administration (FDA) Conditions of Use B through H, in contact with all food types except Food Type VI C, Beverages containing more than 8 percent alcohol.Omnix® DW-4050 is also cleared for food contact use by European Union regulations. For specific clearances, please contact your Solvay representative.It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 注射 | 干燥温度 | 퉔 | °C | 干燥时间 | 팡. 到 ꔄ졹 | hr | 料筒后部温度 | 졹 | °C | 料筒前部温度 | 졹퉔 | °C | 加工（熔体）温度 | 졹롆 到 졹 | °C | 模具温度 | 퉔 到 ꔄ팡 | °C |
| 物理性能 | 密度 / 比重 | ASTM D792 | ꔄ. | g/cm³ | 收缩率 4 | ISO 294-4 | 横向流量 | . | % | 流量 | .ꔄ | % |
| 机械性能 | 拉伸模量 | ISO 527-2 | 23°C | ꔄ롆 | MPa | 拉伸应力 | ISO 527-2 | 屈服, 23°C | 졹팡 | MPa | 拉伸应变 | ISO 527-2 | 断裂, 23°C | 졹. | % | 弯曲模量 | ISO 178 | ꔄ | MPa | 弯曲应力 | ISO 178 | ꥅ | MPa |
| 冲击性能 | 简支梁缺口冲击强度 | ISO 179 | 23°C | ꔄꥅ | kJ/m² | 简支梁无缺口冲击强度 | ISO 179 | 23°C | ꔄ | kJ/m² | 悬壁梁缺口冲击强度 | ISO 180 | 23°C | ꔄ | kJ/m² | 无缺口伊佐德冲击强度 | ISO 180 | 23°C | | kJ/m² |
| 热性能 | 熔融温度 | ISO 11357-3 | 졹 | °C |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
