产品推荐
供应：Nylon 66 50% Carbon Fiber Filled
▶ ✿ 友铭塑胶代理销售进口塑料，价格优惠，质量保证， --友铭塑胶优价批发，索取物性资料、报价表、UL报告、ROSH标准、SGS检测报告，COA出厂资料，MSDS材质证明 开增值税等可与我司业务邓小姐联系，
PA6 特性与应用
PA6 用途：
1、电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座、插座、接头、垫圈等；
2、汽车：散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座、滤油器、变速杆等；
3、工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑轮、电动工具等；
4、其他：电动工具、护罩、风叶、齿轮、机床附件、运动器材、玩具制品、扎带等。
PA6 注塑模工艺:
干燥处理：由于 PA6 很容易吸收水分，因此加工前的干燥特别要注意。如果材料是用防水材料包装供应的，则 容器应保持密闭。如果湿度大于 0.2%，建议在 80C 以上的热空气中干燥 16 小时。如果材料已经在空气中暴露 超过 8 小时，建议进行 105C，8 小时以上的真空烘干。
熔化温度：230~280C，对于增强品种为 250~280C。
模具温度：80~90C。
供应以下型号：
| Overview - Nylon 6, Unreinforced |
| Overview - Nylon 6, Impact Grade |
| Overview - Nylon 6, Cast |
| Overview - Nylon 6, Unreinforced, Flame Retardant |
| Overview - Nylon 6, Heat Stabilized |
| Overview - Nylon 6, Film Grade |
| Overview - Nylon 6, Extruded |
| Overview - Nylon 6, Nucleated |
| Overview - Nylon 6, PTFE Filled |
| Overview - Nylon 6, MoS2 Filled |
| Overview - Nylon 6, 10% Glass Fiber Filled |
| Overview - Nylon 6, 20% Glass Fiber Filled |
| Overview - Nylon 6, 30% Glass Fiber Filled |
| Overview - Nylon 6, 40% Glass Fiber Filled |
| Overview - Nylon 6, 50% Glass Fiber Filled |
| Overview - Nylon 6, Glass Filled, Impact Grade |
| Overview - Nylon 6, Glass Bead Filled |
| Overview - Nylon 6, Glass Fiber/Solid Lube Filled |
| Overview - Nylon 6, Glass Fiber Filled, Flame Retardant |
| Overview - Nylon 6, 20% Mineral Filled |
| Overview - Nylon 6, 30% Mineral Filled |
| Overview - Nylon 6, 40% Mineral Filled |
| Overview - Nylon 6, Mineral Reinforced, Impact Grade |
| Overview - Nylon 6, Glass/Mineral Reinforced |
| Overview - Nylon 6, Carbon Fiber/PTFE Reinforced |
| Overview - Nylon 6, Carbon Fiber Filled |
| Overview - Nylon 6, Stainless Steel Filled |
| Overview - Nylon 6; Molded/Extruded; with Elastomer Copolymer |
| Overview - Nylon 66, Unreinforced |
| Overview - Nylon 66, Impact Grade |
| Overview - Nylon 66, Unreinforced, Flame Retardant |
| Overview - Nylon 66, Conductive |
| Overview - Nylon 66, Heat Stabilized |
| Overview - Nylon 66, Extruded |
| Overview - Nylon 66, Film |
| Overview - Nylon 66, Nucleated |
| Overview - Nylon 66, PTFE Filled |
| Overview - Nylon 66, MoS2 Filled |
| Overview - Nylon 66, Glass Bead Filled |
| Overview - Nylon 66, 10% Glass Fiber Filled |
| Overview - Nylon 66, 20% Glass Fiber Filled |
| Overview - Nylon 66, 30% Glass Fiber Filled |
| Overview - Nylon 66, 40% Glass Fiber Filled |
| Overview - Nylon 66, 50% Glass Fiber Filled |
| Overview - Nylon 66, 60% Glass Fiber Filled |
| Overview - Nylon 66, Glass Reinforced, Impact Grade |
| Overview - Nylon 66, Glass Fiber/PTFE Filled |
| Overview - Nylon 66, Glass Fiber/MoS2 Filled |
| Overview - Nylon 66, Glass Fiber Filled, Flame Retardant |
| Overview - Nylon 66, 10% Carbon Fiber Filled |
| Overview - Nylon 66, 20% Carbon Fiber Filled |
| Overview - Nylon 66, 30% Carbon Fiber Filled |
| Overview - Nylon 66, 40% Carbon Fiber Filled |
| Overview - Nylon 66, 50% Carbon Fiber Filled |
| Overview - Nylon 66, Aramid Fiber Filled |
| Overview - Nylon 66, Carbon Fiber/PTFE Filled |
| Overview - Nylon 66, Glass/Carbon Fiber Filled |
| Overview - Nylon 66, 10% Mineral Filled |
| Overview - Nylon 66, 20% Mineral Filled |
| Overview - Nylon 66, 30% Mineral Filled |
| Overview - Nylon 66, 40% Mineral Filled |
| Overview - Nylon 66, Glass/Mineral Filled |
| Overview - Nylon 66, Mineral Filled, Impact Grade |
| Overview - Nylon 66, Mineral Filled, NCG Fiber Filled |
| Overview - Nylon 66, Carbon Black + Glass Fiber Filled |
| Overview - Nylon 66, Stainless Steel Filled; EMI Grade |
| Overview - Nylon 66, Partially Aromatic |
| Overview - Nylon 66, Partially Aromatic, Glass Filled |
| Overview - Nylon 66, Partially Aromatic, Carbon Fiber Filled |
| Overview - Nylon 6-3 |
| Overview - Nylon 63, 35% Glass-Filled |
| Overview - Nylon 6/9; Molded/Extruded; Unmodified |
| Overview - Nylon 610 |
| Overview - Nylon 610, Glass Reinforced |
| Overview - Nylon 610, Carbon Fiber Filled |
| Overview - Nylon 612, Unreinforced |
| Overview - Nylon 612, Impact Modified |
| Overview - Nylon 612 with Molybdenum Sulfide Filler |
| Overview - Nylon 612 with PTFE Filler |
| Overview - Nylon 612, Carbon Fiber Filler |
| Overview - Nylon 612, Glass/Mineral Filler |
| Overview - Nylon 612, Glass Fiber Filler |
| Overview - Nylon 612, Aramid Fiber Filled |
| Overview - Nylon 612 with Carbon Black + PTFE Filler |
友铭（国际）塑胶化工有限公司
联系人：
邓祝德
服务热线：
즂ꁸ뤗얓썴뤗뤗썴얓
얓뤗-ꁸ썴뤗턷-얓ꕡ턷썴즂썴뤗숷
公司地址：
广东东莞市中国 东莞 樟木头塑胶原料市场T栋2号
-
直销☆PC 韩国三养3025GNH15☆阻燃,玻纤增强PC￥0元
-
直销☆PC 韩国三养3025GRU20☆阻燃,耐气候玻纤增强PC￥0元
-
直销☆PC 韩国三养NH3022S ☆￥0元
-
直销☆PC 韩国三养TH3025N ☆￥0元
-
直销☆PC 韩国三养BH3020NH ☆阻燃PC￥0元
-
直销☆PC 韩国三养CX3024NH ☆阻燃PC￥0元
-
直销☆PC 韩国三养NH3025NP ☆阻燃PC￥0元
-
直销☆PC 韩国三养NH3025NT ☆阻燃PC￥0元
PA66 50% Carbon Fiber Filled相关产品
- C/ABS C1200 沙伯基础（原GE）
- PC/ABS C2800 沙伯基础（原GE）
- PC/ABS C6600 沙伯基础（原GE）
- PC/ABS CS103 南京德尔隆
- PC/ABS CS9000 南京德尔隆
- PC/ABS FR2000 德国拜耳
- PC/ABS H3070 北京瀚仑
- PC/ABS PC-385 台湾奇美
- PC/ABS PC-510 台湾奇美
- PC/ABS PC/ABS-F01 常州赫利来
- PC/ABS PCA-458 中新华美
- PC/ABS PCA-858/中新华美
- PRL PEI-GP1-TFE5
- PEI QR Resin QR-5000
- PEI QR Resin QR-5000-GF10
- PEI QR Resin QR-5000-GF20
- PEI QR Resin QR-5000-GF30
- SABIC PC Lexan SLX1231T
猜你在找
免责声明：以上展示的PA66 50% Carbon Fiber Filled信息由友铭（国际）塑胶化工有限公司自行提供，内容的真实性、准确性和合法性由发布企业负责，
全球塑胶网对此不承担责任。
风险防范建议：为保障您的利益，建议优先选择速购通会员
手机版：PA66 50% Carbon Fiber Filled
更新产品链接为：https://www.51pla.com/html/sellinfo/130/13065476.htm
发送询价单
