Solvay TECHNYL A 208F PA66, DRY

价格
起订量
所在地	广东东莞	可售量 0

联系人：邓华军

身份已验证

手机已验证

롂넧ꄈ퍤롂줨퍤

퍤쐩-ꄈ쐩쑑-퍤퍤넧퍤퍤퍤

手机扫码快速拨号

免费会员第16年

艾博（国际）塑胶进出口有限公司

联系人：邓华军 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：퍤쐩-ꄈ쐩쑑-퍤퍤넧퍤퍤퍤

手机号码：롂넧ꄈ퍤롂줨퍤

公司官网： http://abba2010.51pla.com

所在地区：广东省东莞市

主营产品：塑胶原料,

进入店铺

产品分类

最新产品

商品详情联系方式

进入手机版

基本参数

Solvay TECHNYL A 208F PA66, DRY

Technyl®一208F PA66、干
类别：聚合物；热塑性；尼龙；尼龙66
材料说明：说明：非增强尼龙PA66、热稳定、高流动性、快速循环级，注塑成型。
可在：欧洲
产品应用：Technyl 208F提供了三个主要的优势：优良的填充质量，长期良好的热性能，V2额定在0.4毫米。根据UL94。特别适用于要求具有良好耐热性的薄壁型材的长零件的成型：电缆扎带和紧固件和连接器。本产品可在天然和黑色。
罗地亚罗地亚提供的信息，已收购Solvay。

Solvay TECHNYL A 208F PA66, DRY美国苏威

Physical Properties	Metric	English	Comments

Density	1.14 g/cc	0.0412 lb/in3	ISO 1183/A
Water Absorption	1.2 % @Temperature 23.0 °C, Time 86400 sec	1.2 % @Temperature 73.4 °F, Time 24.0 hour	ISO 62
Linear Mold Shrinkage	0.010 cm/cm	0.010 in/in	Isotropy
Linear Mold Shrinkage, Flow	0.020 cm/cm	0.020 in/in
Linear Mold Shrinkage, Transverse	0.020 cm/cm	0.020 in/in

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	60.0 MPa	8700 psi	ISO 527 Type 1A
Tensile Strength, Yield	85.0 MPa	12300 psi	ISO 527 type 1 A
Elongation at Yield	7.0 %	7.0 %	ISO 527 type 1 A
Tensile Modulus	3.20 GPa	464 ksi	ISO 527 Type 1A
Flexural Modulus	2.90 GPa	421 ksi	ISO 178
Izod Impact, Notched (ISO)	4.50 kJ/m2	2.14 ft-lb/in2	ISO 180/1A
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
Charpy Impact, Notched	0.450 J/cm2	2.14 ft-lb/in2	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	2.9	2.9	IEC 60250
Dielectric Strength	27.0 kV/mm	686 kV/in	IEC 60243
Dissipation Factor	0.030	0.030	IEC 60250
Comparative Tracking Index	375 V	375 V	Solution B; IEC 60112
	475 V	475 V	Solution A; IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear	70.0 μm/m-°C @Temperature 23.0 - 85.0 °C	38.9 μin/in-°F @Temperature 73.4 - 185 °F	ISO 11359
Melting Point	263 °C	505 °F	ISO 11357
Deflection Temperature at 1.8 MPa (264 psi)	75.0 °C	167 °F	ISO 75/Af
Flammability, UL94	V-2 @Thickness 0.380 mm	V-2 @Thickness 0.0150 in	ISO 1210
	V-2 @Thickness 0.800 mm	V-2 @Thickness 0.0315 in	ISO 1210
	V-2 @Thickness 1.60 mm	V-2 @Thickness 0.0630 in	ISO 1210
Oxygen Index	26 %	26 %	ISO 4589
Glow Wire Test	650 °C @Thickness 1.60 mm	1200 °F @Thickness 0.0630 in	Ignition Temperature; ISO 60695-2-13
	850 °C @Thickness 1.60 mm	1560 °F @Thickness 0.0630 in	ISO 60695-2-12

Processing Properties	Metric	English	Comments
Feed Temperature	265 - 275 °C	509 - 527 °F
Mold Temperature	60.0 - 80.0 °C	140 - 176 °F
Drying Temperature	80.0 °C	176 °F
Moisture Content	<= 0.20 %	<= 0.20 %

Descriptive Properties
Compression Zone	270-280°C
Mixing Zone	280-285°C

Solvay TECHNYL® eXten D 458P PA6.10, Conditioned
Solvay TECHNYL® 1011R PA6, DRY
Solvay TECHNYL® 1011R PA6, Conditioned
Solvay TECHNYL® 1015CR PA6, DRY
Solvay TECHNYL® 1015CR PA6, Conditioned
Solvay TECHNYL® 1021GF6 PA6, 30% glass fiber, DRY
Solvay TECHNYL® 1021ST PA6, DRY
Solvay TECHNYL® 1021ST PA6, DRY
Solvay TECHNYL® 1021ST PA6, Conditioned
Solvay TECHNYL® 2210HS PA66, DRY
Solvay TECHNYL® 2210HS PA66, Conditioned
Solvay TECHNYL® 2411GF6 PA66, 30% glass fiber, DRY
Solvay TECHNYL® 2411GF6 PA66, 30% glass fiber, Conditioned
Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, DRY
Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, Conditioned
Solvay TECHNYL® 2412GHF8 PA66, 40% glass fiber, DRY
Solvay TECHNYL® 2412GHF8 PA66, 40% glass fiber, Conditioned
Solvay TECHNYL® 2412GM05-D PA66, 38% glass fiber, DRY
Solvay TECHNYL® 2417IG PA66, 20% glass fiber, DRY
Solvay TECHNYL® 2710IR PA66, DRY
Solvay TECHNYL® 2710IR PA66, Conditioned
Solvay TECHNYL® 27010ST PA66, DRY
Solvay TECHNYL® 27010ST PA66, Conditioned
Solvay TECHNYL® 2912GMH7-P PA66, 63% glass fiber, DRY
Solvay TECHNYL® A 118L V50 PA66, 50% glass fiber, Eh 0
Solvay TECHNYL® A 20 V25 PA66, 25% glass fiber, DRY
Solvay TECHNYL® A 20 V25 PA66, 25% glass fiber, Conditioned
Solvay TECHNYL® A 20 V35 PA66, 35% glass fiber, DRY
Solvay TECHNYL® A 20 V35 PA66, 35% glass fiber, Conditioned
Solvay TECHNYL® A 205F PA66, DRY
Solvay TECHNYL® A 205F PA66, Conditioned
Solvay TECHNYL® A 208F PA66, DRY
Solvay TECHNYL® A 208F PA66, Conditioned
Solvay TECHNYL® A 208KBK-10N-L PA66, DRY
Solvay TECHNYL® A 208KBK-10N-L PA66, Conditioned
Solvay TECHNYL® A 216 NATURAL FA PA66, DRY
Solvay TECHNYL® A 216 NATURAL FA PA66, Conditioned
Solvay TECHNYL® A 216 S30 PA66, 30% glass spheres, DRY
Solvay TECHNYL® A 216 S30 PA66, 30% glass spheres, Conditioned
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, DRY
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, Conditioned
Solvay TECHNYL® A 216 V15 Black 21N PA66, 15% glass fiber, DRY
Solvay TECHNYL® A 216 V15 Black 21N PA66, 15% glass fiber, Conditioned

Solvay TECHNYL A 208F PA66, DRY 美国苏威

18.TECHNYL PA66 A 216 S40:30%玻璃珠填料.

特点表面光洁度好低翘曲良好的压缩强度

外貌黑色本色

处理方法注塑成型

19.TECHNYL PA66 A 216 V10:10%玻璃纤维增强，注射成型。

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

20.TECHNYL PA66 A 216 V15:15％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色灰色本色

处理方法注塑成型

21.TECHNYL PA66 A 216 V20:20％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

22.TECHNYL PA66 A 216 V30:30％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

23.TECHNYL PA66 A 216 V35:聚酰胺尼龙66，35％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

Solvay TECHNYL A 208F PA66, DRY原厂原包，可提供原产地证明、COA.COC.ROHS.MSDS.UL等资料。