Lighthouse Solair 5100便携式粒子计数器

美国莱特浩斯Lighthouse Solair 5100便携式粒子计数器
Solair 5100彩屏显示，带电电池的便携式微粒计数器0.3微米◎1.0立方英尺6通道。

Solair 3100和Solair 5100便携式粒子计数器结合了激光二极管技术感应器，平均无故障时间（持续运作24/7的 基础).Solair系列采用了行业内用户界面来配置和操作仪器。直观的图标指示屏幕简单易学易操作。这款仪器可在8通道存储多达3000组粒子数据。所有的数据可以快速可靠的传输到具有设备监测系统或建筑自动化系统的电脑上。通过使用Lighthouse安全数据传输和LMS Express或Express RT 软件可以读取传输到USB驱动器上的安全数据（符合21 CFR Part 11标准）。
以太网，RS-485，USB和USB驱动器接口的整合形成了这些仪器灵活的通讯系统。

莱特浩斯产品设计、制造和校准符合ISO21501-4标准确保粒子计数的准确性。

SOLAIR 5100
Portable Particle Counter

Number 1 in Versatility

The SOLAIR 5100 is the most versatile particle counter on the market today.

Whether you are certifying your cleanroom to ISO standards, performing routing testing, counting particles in your compressed gas lines, scanning your HEPA filters for leaks, challenge testing your HEPA filters or measuring environmental parameters such as TRH, DP, AV the SOLAIR 5100 portable particle counter is the right instrument to get the job done.

Cleanroom Certification

Whether you are certifying to current ISO 146644 standards, EU GMP Annex 1 or Federal Standards 209E, the SOLAIR 5100 has you covered with its certification report wizard.

Routine Testing

Routine testing is a breeze with the intuitive interface, zoom screen and on board sample recipes.

Troubleshooting

With beep and concentration sample modes the SOLAIR 5100 will simplify the identification of particle sources within your clean room.

Compressed Gas Testing

The SOLAIR 5100 can be used to test for particle counts in compressed air by utilizing a high pressure diffuser or high pressure controller. Particles can be tested down to 0.5 micron.

HEPA Filter Scanning

The scanning of HEPA filters is a critical step to ensure the integrity of the HEPA filter and overall cleanliness of the clean room. The ScanAir attachment from Lighthouse makes filter scanning an easier operation.

HEPA Filter Challenge Testing

Monitoring of other environmental parameters such as Temp, Humidity, Differential Pressure or Air Velocity.

Other Environmental Sampling

The SOLAIR 5100 can record data from up to 4 environmental sensors that plug into and are powered by the SOLAIR 5100. Data is recorded into the 3,000 record data buffer and can be downloaded along with the particle count data to your computer of via USB key.

Ease of Use

Spend less time configuring your particle counter and more time counting particles. The SOLAIR 5100 features one of the industry’s best and easy to use touch screen interface (UI). With ICON-driven menus, concise layout and enhanced responsiveness, sample configuration is a breeze.

The intuitive interface reduces learning uptime for new users and simplifies the writing of SOP’s for operation.

For clean room certification the SOLAIR 5100 has an integrated report wizard that makes clean room certification a breeze. Once the basic sample parameters are input the wizard will prompt the end user to move to the next sample location, this helps to ensure no sample locations are missed.

The configurable recipe database can store up to 50 recipes for sampling and reports. These recipes reduce operator configuration errors as well as setup time.

Lighter is better and the SOLAIR 5100 particle counter is one of the lightest particle counters on the market at only 12 lbs. without battery and 13.4 with a battery.

The SOLAIR 5100 can be powered via onboard battery or plugged directly into a power outlet for extended use. With the fastest battery recharge time of any portable on the market the SOLAIR 5100 offers unrivaled uptime.

Data from the SOLAIR 5100 can be downloaded directly to a standalone software package or a real time monitoring system from Lighthouse.

Flexible communications with these instruments is made possible by the integrated Ethernet, RS-485, USB and USB flash drive interfaces.

Reliability

The SOLAIR 5100 incorporates our extreme life laser diode technology sensor to produce the industry’s longest laser diode life of 20  year MTTF (based on continuous 24/7 operation).

The vacuum system within the SOLAIR 5100 was designed with closed loop feedback to ensure accurate sample volumes. The vacuum pump was designed and built by Lighthouse to ensure long term reliability.

The SOLAIR 5100 is designed, manufactured and calibrated to ISO 21501-4 to ensure particle-counting accuracy.

The SOLAIR 5100 can store up to 3,000 records of particle count data from up to 8 particle channels and the configurable recipe database can store up to 50 recipes for sampling and reports. All data can be quickly and reliably transferred to a computer, a Facility Monitoring System or a Building Automation System. Secure data transfer (per 21 CFR Part 11) to a USB flash drive can be accomplished by using the Lighthouse secure data transfer feature and LMS Express software.

Key Features:

1.0 CFM (28.3 LPM) flow rate
Up to 8 particle sizes
Number 1 in class for versatility
Industries Best User Interface
ISO 21501-4 Compliant
One of the lightest portables on the market
20-year MTTF laser lifespan
Stainless steel construction
21 CFR Part 11 compliant secure data transfer via USB flash drive
Report wizard for cleanroom pass/fail reports: FS-209E, ISO 14644-1 (2015 version) and EU GMP Annex 1
Multiple communication interfaces; USB, RS-485, Ethernet and USB flash drive
5.7-inch color TFT touch screen display
3,000 record data storage memory
50-record configurable recipe database
Multiple-language support: English, French, German, Italian, Spanish, Chinese, Russian, Japanese, Korean