东莞市塑宇化工有限公司

主营产品：尼龙美国杜邦首诺,

ꔲ푰팒沈륇

当前位置：首页 > 产品大全 > 工程塑料 > ABS合金 > PCABS基础创新塑料C6200-701.30%加纤PCABS塑料.纤维防火PCABS塑料.30%加纤PCABS塑料.

PCABS基础创新塑料C6200-701.30%加纤PCABS塑料.纤维防火PCABS塑料.30%加纤PCABS塑料.

联系人：贺义平

身份已验证

手机已验证

微信已验证

企业已验证

ꔲ푰팒沈륇

푰륇沈-륇沈沈沈

手机扫码快速拨号

速购通标准会员第6年

东莞市塑宇化工有限公司

联系人：贺义平 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：푰륇沈-륇沈沈沈

手机号码：ꔲ푰팒沈륇

所在地区：广东省东莞市

扫一扫，加我微信

进入店铺

产品分类

SABIC Innovative Plastics Cycoloy® C6200 PC+ABS

Non-chlorinated, nombrominated flame retardant PC/ABS offering balanced heat, flow and impact to meet various application needs.

C6200-701 PC+ABS 物性表

物理性能	额定值 (公制)	额定值 (英制)	测试方法
比重	1.18 g/cc	1.18 g/cc	ASTM D792
线性成型收缩率,Flow	0.0040 - 0.0060 cm/cm @Thickness 3.20 mm	0.0040 - 0.0060 in/in @Thickness 0.126 in	SABIC Method
线性成型收缩率，横向	0.0040 - 0.0060 cm/cm @Thickness 3.20 mm	0.0040 - 0.0060 in/in @Thickness 0.126 in	SABIC Method
熔体流动速率	14.5 g/10 min @Load 2.16 kg, Temperature 260 °C	14.5 g/10 min @Load 4.76 lb, Temperature 500 °F	ASTM D1238
Spiral Flow	68.58 cm @Temperature 260 °C	27.00 in @Temperature 500 °F	10 ips,3.175 X 1524 mm

机械性能	额定值 (公制)	额定值 (英制)	测试方法
抗张强度(屈服)	66.0 MPa	9570 psi	Type I, 50 mm/min; ASTM D638
伸长率 (断裂)	50 %	50 %	Type I, 50 mm/min; ASTM D638
弯曲强度	103 MPa	14900 psi	2.6 mm/min, 100 mm span; ASTM D790
弯曲模量	2.68 GPa	389 ksi	2.6 mm/min, 100 mm span; ASTM D790
悬壁梁缺口冲击强度	5.34 J/cm	10.0 ft-lb/in	ASTM D256
落锤总能量	61.0 J	45.0 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
	54.0 J @Temperature -30.0 °C	39.8 ft-lb @Temperature -22.0 °F	Instrumented Impact Energy @ peak; ASTM D3763

电气性能	额定值 (公制)	额定值 (英制)	测试方法
体积电阻率	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
表面电阻	>= 1.00e+15 ohm	>= 1.00e+15 ohm	ROA; IEC 60093
介电常数	2.7 @Frequency 1.00e+6 Hz	2.7 @Frequency 1.00e+6 Hz	IEC 60250
	2.8 @Frequency 50.0 - 60.0 Hz	2.8 @Frequency 50.0 - 60.0 Hz	IEC 60250
介电强度	17.0 kV/mm @Thickness 3.20 mm	432 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
	25.0 kV/mm @Thickness 1.60 mm	635 kV/in @Thickness 0.0630 in	in oil; IEC 60243-1
	35.0 kV/mm @Thickness 0.800 mm	889 kV/in @Thickness 0.0315 in	in oil; IEC 60243-1
耗散因数	0.0040 @Frequency 50.0 - 60.0 Hz	0.0040 @Frequency 50.0 - 60.0 Hz	IEC 60250
	0.0080 @Frequency 1.00e+6 Hz	0.0080 @Frequency 1.00e+6 Hz	IEC 60250
耐电弧性	60 - 120 sec	60 - 120 sec	Tungsten; ASTM D495
相比耐漏电起痕指数(CTI)	250 - 400 V	250 - 400 V	UL 746A
热丝引燃 (HWI)	30 - 60 sec	30 - 60 sec	UL 746A
高电弧燃烧，HAI	>= 120 arcs	>= 120 arcs	UL 746A
高压电弧跟踪率，HVTR	80.0 - 150 mm/min	3.15 - 5.91 in/min	UL 746A

热性能	额定值 (公制)	额定值 (英制)	测试方法
Deflection Temperature at 1.8 MPa (264 psi)	87.0 °C @Thickness 3.20 mm	189 °F @Thickness 0.126 in	unannealed; ASTM D648
	90.0 °C @Thickness 6.40 mm	194 °F @Thickness 0.252 in	unannealed; ASTM D648
UL RTI	85.0 °C	185 °F	UL 746B
UL RTI，机械冲击	85.0 °C	185 °F	UL 746B
UL RTI，机械无冲击	85.0 °C	185 °F	UL 746B
可燃性(UL94)	HB @Thickness 0.710 mm	HB @Thickness 0.0280 in	UL 94
	V-1 @Thickness 1.21 mm	V-1 @Thickness 0.0476 in	UL 94
	V-0 @Thickness 1.47 mm	V-0 @Thickness 0.0579 in	UL 94
	5VB @Thickness 2.00 mm	5VB @Thickness 0.0787 in	UL 94
	5VA @Thickness 3.40 mm	5VA @Thickness 0.134 in	UL 94