南承机械 全自动吹瓶机 塑料玻璃吹瓶成型设备

机器特点：
Machine features:
1、采用驰名品牌的微电脑控制系统及气动、液压、电子元件，性能、稳定、耐用；使用全中文或全英文直观控制操作，使机器操作更简易。
1、Adopt international well-known microcomputer control system and pneumatic、hydraulic and electric components with reliable performance and wear well; Additionally, use Chinese or English operating interface, it is easy to complete various kinds of operation.
2、配套使用驰名品牌的低压吹气阀及高压吹气阀，采用二次吹气技术，成品与瓶胚的拉伸比可达5；
2、Matched with international well-known low and high pressure blowing valve, the extension ratio between the finished product and bottle parison can be realized with 5 when adopt secondary air blowing technology;
3、采用直压式 气—液 联动增压合模锁模机构，锁模后能承受3.0Mpa以上的 高压吹瓶压力；在瓶胚适度加温后，能使吹制的瓶子饱满通透、光洁度高、强度高、壁厚均匀；
3、Adopt direct pressure pneumatic-hydraulic pressurizing mold closing and locking mechanism, the machine can bear 3.0MPa above blowing pressure; after the bottle has been heated up, the bottle shall be seemed to be plump、bright with high strength
4、本系列机器适合吹制30毫升—18.9升（5加仑）的PET塑料瓶或其它塑料容器;在吹制化妆品瓶等高要求产品时更显出本系列机器的优越性能。
4、This series machines apply to manufacturing 30 ml -18.9L (5 Gallon) PET plastic bottle or other plastic containers; When carry out blast-produced for the products with high standard requirements, the advantage of this series machines shall be reflected.
5、开合模运行平稳，无振动。模具安装方便，在相应机器的容模范围内无须调整容模厚度。吹瓶时低压合模，高压锁模，模具使用寿命。
5、The operation of mold open and closing is smooth without vibration. It is easy to install mold, there is no need for adjusting the thickness of mold capacity. When carry out bottle blowing, the mold closing shall be completed under low pressure, and while the mold locking shall be completed under high pressure, and so the useful life of mold can be guaranteed effectively.
6、配置红外线光电感应开关，在生产过程中当人手进入操作范围后锁模架会自动打开，保护工作人员人身安全。
6、Equipped with infrared photoelectric switch, when the hand enters into the operation limited range, the mold locking frame shall be open by itself, so protect the work staff from danger.
7、本系列机器可按产品的需要增加模具加温及控温系统、冷吹气控制系统，成为吹制冷、热灌装瓶的通用机型；
7、If this machine is equipped with heating and temperature control system as well as cooling blowing control system, it can be used as the general model for blast-produced cooling or hot filling bottles.

WFJ-A 和 WFJ-L 型PET瓶胚红外线加温机：
WFJ-A WFJ-L PET Bottle Preform Infrared Heater:
WFJ-A和 WFJ-L型PET瓶胚红外线加温机是二步法PET吹瓶配套设备，适合壁厚达10毫米的各种长度瓶胚加温；其具有以下优点：
WFJ-A WFJ-L PET Bottle Preform Infrared Heater, associated equipment for two-step PET bottle blowing, is suitable for the heating of bottle preforms of different lengths with wall thickness up to 10mm. It has the advantages as follows:
1、采用红外线旋转式瓶坯加温机构；配套使用驰名品牌变频器及变频电机进行变频调速，转矩恒定；瓶胚均匀自转和公转加温，使瓶胚能准确地按要求加温；
1、With infrared rotary bottle preform heating mechanism in conjunction with variable frequency speed control, utilizing Internationally famous brands Frequency converter and frequency conversion motor, the torque is constant. The heating of bottle preform by means of uniform autorotation and revolution ensures that the bottle preform is accurately heated according to the requirement.
2、配多区多段独立调温，加温过程由可控硅和智能型数字调节器根据同步电压和反馈电压进行调节控制，不受外界供电电压波动的影响，瓶胚加温前后一致，确保吹瓶质量；
2、With independent temperature adjustment of Many zones and Many sections, temperature regulated by SCR and intelligent digital regulator according to synchronizing voltage and feedback voltage during the process of heating; no disturbance of voltage fluctuation of external power supply, the quality of the bottle is ensured by means of uniform heating temperature of the bottle preform before and after the process of heating.
3、设置有瓶口保护装置，瓶口不变形；
3、Bottle mouth protection unit is set to prevent the bottle mouth ..