护罩化妆品家电部件容器PCTG 美国伊士曼 DN011 注塑级工程塑料

价格	￥17.60/千克
起订量	≥25
所在地	广东东莞	可售量 10000千克

联系人：尹日辉

身份已验证

手机已验证

微信已验证

企业已验证

ꥢꤴ줰줵ꈓ줰

ꍐꈓ줰-줵ꈓꤴ줰

手机扫码快速拨号

速购通标准会员第5年

东莞市宏裕塑胶原料有限公司

联系人：尹日辉 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：ꍐꈓ줰-줵ꈓꤴ줰

手机号码：ꥢꤴ줰줵ꈓ줰

公司官网： http://www.hongyupla.com/

所在地区：广东省东莞市

主营产品： PPS, PPSU/PSU, PEEK, PEI, 导电硅胶, 抗静电硅胶, 氟硅胶等等,

扫一扫，加我微信

进入店铺

产品分类

Eastar™ DN011

共聚多酯

Eastman Chemical Company

产品说明：

Eastar™ Copolyester DN011 is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester DN011 contains a mold release.

This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

This product has been CRADLE TO CRADLE CERTIFIED(cm)
The CRADLE TO CRADLE CERTIFIED(cm) Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce (‘eco-efficiency'), to a new paradigm of increasing its positive impacts (‘eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's ‘biological metabolism' as a model for developing a ‘technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit http://www.mbdc.com.

Eastar™ DN011 物性表

基本信息

添加剂	脱模
特性	抗撞击性，良好耐化学性良好清晰度，高收缩性低脱模性能良好
用途	Cosmetic Packaging Decorative Displays 地板保养/维修个人护理护罩化妆品家电部件容器
形式	粒子
加工方法	注射成型

物理性能	额定值	单位制	测试方法
比重	1.23	g/cm3	ASTM D792
收缩率 - 流动	0.40	%	ASTM D955

硬度	额定值	单位制	测试方法
洛氏硬度 (R 级, 23°C)	105		ASTM D785

机械性能	额定值	单位制	测试方法
拉伸模量 (23°C)	1800	MPa	ASTM D638
抗张强度			ASTM D638
屈服, 23°C	44.0	MPa	ASTM D638
断裂, 23°C	54.0	MPa	ASTM D638
伸长率			ASTM D638
屈服, 23°C	4.0	%	ASTM D638
断裂, 23°C	330	%	ASTM D638
弯曲模量 (23°C)	1800	MPa	ASTM D790
弯曲强度 (23°C)	66.0	MPa	ASTM D790

冲击性能	额定值	单位制	测试方法
悬壁梁缺口冲击强度			ASTM D256
-40°C	77	J/m	ASTM D256
23°C	无断裂		ASTM D256
无缺口悬臂梁冲击			ASTM D4218
-40°C	无断裂		ASTM D4218
23°C	无断裂		ASTM D4218
装有测量仪表的落镖冲击			ASTM D3763
-40°C, Energy at Peak Load	46.0	J	ASTM D3763
23°C, Energy at Peak Load	46.0	J	ASTM D3763