埃克森美孚LLDPE EXXONMOBIL LL 8460

价格	￥11.00/公斤
起订量	≥25
所在地	广东东莞	可售量 10000公斤

联系人：邓女士

身份已验证

手机已验证

微信已验证

企业已验证

쉸랉씨떂쉸숄떂

씨-떂떂랉떂떂떂

手机扫码快速拨号

免费会员第6年

东莞市恒磊塑胶有限公司

联系人：邓女士 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：씨-떂떂랉떂떂떂

手机号码：쉸랉씨떂쉸숄떂

公司官网： http://hengleisj.51pla.com

所在地区：广东省东莞市

主营产品：塑胶原料,

扫一扫，加我微信

进入店铺

产品分类

LLDPE EXXONMOBIL LL 8460

线性低密度聚乙烯(LLDPE)为无毒、无味、无臭的乳白色颗粒，密度为0.918~0.935g/cm3。它与LDPE相比，具有较高的软化温度和熔融温度，有强度大、韧性好、刚性大、耐热、耐寒性好等优点，还具有良好的耐环境应力开裂性，耐冲击强度、耐撕裂强度等性能，并可耐酸、碱、有机溶剂等而广泛用于工业、农业、医药、卫生和日常生活用品等领域。

Product DescriptionLL 8460 is a linear low density hexene copolymer designed to offer excellent ESCR and toughness. This resin is ideally suited for applications that require the optimum balance of processability, stiffness and low temperature toughness.

General
Availability¹	Latin AmericaNorth America
Additive	LLP8460.29: Long Term UV-15 Stabilizer: YesLL 8460.29: Long Term UV-15 Stabilizer: Yes
Applications	Agricultural TanksChemical Storage TanksLarge Size Playground EquipmentPalletsPotable Water TanksSeptic Tanks
Revision Date	09/01/2014

Resin Properties	Typical Value	Unit	Test Based On
Density	0.938	g/cm3	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.3	g/10 min	ASTM D1238 (mod)

Thermal	Typical Value	Unit	Test Based On
Deflection Temperature Under Load (DTUL) at 66psi - Unannealed	54	°C	ASTM D648
Deflection Temperature Under Load (DTUL) at 264psi - Unannealed	38	°C	ASTM D648
Peak Melting Temperature	126	°C	ASTM D3418

Molded Properties	Typical Value	Unit	Test Based On
Tensile Strength at Yield (50 mm/min)	17	MPa	ASTM D638
Elongation at Yield (50 mm/min)	10	%	ASTM D638
Flexural Modulus - 1% Secant	640	MPa	ASTM D790B
Environmental Stress-Crack Resistance			ASTM D1693A