广州言若德新材料科技有限公司

主营产品： PA热熔胶, 材料, 模具, 设备, 代工, 胶黏剂,

ꑶꉰꑶꠅ킄킄킄ꑑꑶ

当前位置：首页 > 产品大全 > 天然及合成树脂 > 聚酰胺树脂 > TECHNOMELT PA 673

TECHNOMELT PA 673

价格	￥160/公斤
起订量	≥20
所在地	广东广州	可售量 2000公斤

联系人：王强

身份已验证

手机已验证

微信已验证

ꑶꉰꑶꠅ킄킄킄ꑑꑶ

ꉰ은ꉰ-넨ꑶ둧은ꠅꠅ은킄

手机扫码快速拨号

免费会员第6年

广州言若德新材料科技有限公司

联系人：王强 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：ꉰ은ꉰ-넨ꑶ둧은ꠅꠅ은킄

手机号码：ꑶꉰꑶꠅ킄킄킄ꑑꑶ

公司官网： www.nourde.com

所在地区：广东省广州市

主营产品： PA热熔胶, 材料, 模具, 设备, 代工, 胶黏剂,

扫一扫，加我微信

进入店铺

产品分类

TECHNOMELT PA 673

被称为 Macromelt OM 673

TECHNOMELT PA 673聚酰胺低压注塑热熔胶，具有良好附着力，适用于高温应用，例如汽车电子。

低压注塑用热熔胶，在较高温度下具有良好的粘合力，例如用于汽车发动机舱。设计满足低压注塑工艺要求。

TECHNOMELT PA 673是一种琥珀色、高性能、热塑性聚酰胺热熔胶，设计满足低压注塑工艺要求。由于其低粘度，可在低压力下处理，无损封装易碎部件。可用于临界工作温度 - UL列名（V-0）下的汽车发动机舱。

无溶剂

易于模塑

卓越的防潮性能

对各种基材具有良好的粘合力

卓越的耐环境性能

非常短的晾置时间

Hotmelt adhesive used for moulding applications with good adhesion for higher temperatures such as automotive underhood. Designed to meet low pressure moulding process requirements.

TECHNOMELT? PA673 is an amber-colored, high performance thermoplastic polyamide and designed to meet low pressure moulding process requirements. Can be processed at low pressure due to its low viscosity, allowing encapsulation of fragile components without damage. Can be used in automotive underhood applications where high service temperature performance is critical - UL-listing (V-0).

Solvent-free

Easy mouldability

Excellent moisture resistance

Good adhesion to a variety of substrates

Excellent environmental resistance

Very short open time

PRODUCT DESCRIPTION

TECHNOMELT PA 673 (e) provides the following product characteristics:

Technology : Polyamide

Appearance : Amber

Product Benefits :

· Easy moldability

· Good adhesion to a variety of substrates

· Excellent moisture resistance

· Excellent environmental resistance

· Simplified process flow

Application : Molding compound thermoplastic

Typical Applications : Encapsulation

Flammability Rating : UL 94 V0 @ 1.2 to 1.4 mm thickness

Operating Temperature : -40 to140 ℃

nourde polyamide low pressure molding

TECHNOMELT PA 673 (e) high performance thermoplastic polyamide

is designed to meet low pressure molding process requirements. This

product can be processed at low processing pressure due to its low

viscosity, allowing encapsulation of fragile components without

damage.

TECHNOMELT PA 673 (e) can be used in automotive underhood

applications where high service temperature performance is critical.

This material produces no toxic fumes in process and provides a good

balance of low and high temperature performance

Viscosity @ 210 ℃, mPa.s (cP) : 3,400

Specific Gravity @ 25 ℃ : 0.98

Softening Point, ℃ : 182 to 192

Handling:

Molding Temperature, ℃ : 210 to 240

TECHNOMELT PA 673 (e) has been formulated to provide the best

possible moldability and as wide a molding latitude as possible. Much

of the final molding parameters will be determined by the mold design.

Although molding and curing conditions will vary from situation to

situation, recommended starting ranges are shown above.

Shore Hardness, Shore A : 88

Elongation , at break,% : 400

Dielectric Strength, kV/mm 20

Volume Resistivity, ohms-cm 1.9×10 12

Comparative Tracking Index @ 300 mm, IEC 60112,volts : 600

Surface Insulation Resistance (SIR) Testing （IPC-TM-650）: Pass

Storage

Store product in the unopened container in a dry location. Storage

information may be indicated on the product container labeling.

TECHNOMELT PA 673 (e) will absorb moisture from the air. Material

from opened containers should be transferred immediately into air tight

containers. Material should be stored in sealed containers in a cool dry

location in order to maximize shelf life.

nourde low pressure molding material solutions.

Material removed from containers may be contaminated during use.

Do not return product to the original container. Henkel Corporation

cannot assume responsibility for product which has been contaminated

or stored under conditions other than those previously indicated. If

additional information is required, please contact your local Technical

Service Center or Customer Service Representative.

TDS: http://cdn.sa.17uhui.com.cn/upload/sites/3381/2022/01/NOURDE-TECHNOMELT-PA-673-E-EN.pdf

UL：https://iq.ul.com/ul/cert.aspx?ULID=226892

henkel technomelt

nourde low pressure molding material solutions

如需TDS（Technical Data Sheets）, SDS（Safety Data Sheets）, RoHS（RoHS Data Sheets）…等资料或申请样品，请联系我们。

1. 图片或视频，均来自产品实物拍摄；

2. 产品数据参数TDS，全部来自原厂官方文件。未作任何修改；

3. 工艺应用产品的图片、文字、视频，可能会牵涉到商业保密，如有发现请及时联系as@nourde.com协商处理；

4. 工艺技术经验，仅用于交流和分享；

5. 所有图文、视频，未经允许，禁止用于任何商业用途；

NOURDE愿景

NOURDE业务

联系方式

广州言若德新材料科技有限公司

联系人：

王强

服务热线：

ꑶꉰꑶꠅ킄킄킄ꑑꑶ

ꉰ은ꉰ-넨ꑶ둧은ꠅꠅ은킄

公司地址：

广州市黄埔区黄埔东路3889号10111、08211室

该企业其他产品

PA热熔胶聚酰胺低压成型￥160元
Polymelt低压注塑热熔胶￥90元
CAVIST LOW PRESSURE MOLDING 低压注塑成型 Overmolded￥20元
UL规格热熔胶 914W￥160元
UL规格热熔胶 918A￥160元
UL防火级电子用热熔胶FH-7063￥75元
高温热熔胶棒8811-2￥65元
阻燃热熔胶棒8811系列￥75元

产地	意大利	保质期	24月
包装	袋装	厂家(产地)	Henkel
外观	颗粒	用途	低压注塑
用途级别	通用级	类型	标准料
经营模式	经销批发	密度	0.98
牌号	Technomelt	Product Type	hot melt adhesives
Technology	Polyamide	Application	Low Pressure Molding

TECHNOMELT PA 673

TECHNOMELT PA 673

被称为 Macromelt OM 673

客服热线：

爱采购专线：

塑胶相关专线：