上海颐品代理wiska金属呼吸电缆接头Wiska SPRINT® EMSVG, VentGLAND, brass

Wiska代理商：Wiska cable gland-上海颐品自动化科技有限公司

Wiska SPRINT  EMSVG, VentGLAND, Brass, metric, EN 62444

WISKA呼吸金属电缆接头-黄铜镀镍

We take the pressure off

Being a pioneer in the development of breathable cable glands, WISKA today is an expert for breathable components avoiding condensation.

With the launch of the VentGLAND^? in 2007, the world"s first cable gland with pressure equalisation, WISKA set new benchmarks. VentGLAND^? cable glands and VentPLUG pressure equalisation units are nowadays being used around the world, especially in sectors that are moisture and temperature sensitive such as shipping, and the lighting and solar industries.

Wiska VentGLAND^? Cable glands

The VentGLAND^? combines pressure equalisation and cable gland in a single unit and features high air flow rates as well as high water protection capacity.

The breathable VentGLAND^? cable glands are a part of the tried and tested modular SPRINT system. The VentGLAND^? can easily be used to replace standard cable glands due to its identical clamping ranges and compatibility with all cap nuts and ranges of multiple and special sealing inserts. The product portfolio is rounded off with VentGLAND^? cable glands with EMC-inserts for protection against electromagnetic interference.

Wiska new VentPLUG Pressure equalisation units

The VentPLUG is used when a cable gland with an additional pressure equalisation unit is required to vent the enclosure.

Pressure equalisation units from WISKA are now also available in thread sizes M 20 and M 40, in addition to M 12. Both feature a flat, space-saving design to enable flexible usage. Thanks to an improved membrane, the air flow rate of the new VentPLUG in the sizes M 20 and M 40 has more than doubled. The high air flow version even achieves a 2.5 times higher value.

Your benefits with Venting products by WISKA

WISKA products are build of highest quality and made for most demanding conditions. Our Venting products offer:

• 
  

• Effective pressure equalisation

• 
  

• Protection against condensation

• 
  

• Protection against contaminants

• 
  

• High operational safety

• 
  

• Increased profitability

• 
  

• Wide product range

• 
  

• Ideal for roughest conditions

Venting solutions for every application

The diversity of our products provide venting solutions for a broad range of applications. Thread sizes include M 12 to M 63 with a wide range of materials such as polyamide, brass and stainless steel. Completed by their high protection classes of IP 68 and 69, venting products by WISKA appear to be true multitalents. On top of that, they have application specific membranes with different air flow rates and robust properties such as resistance to UV, salt water and aggressive chemicals.

WISKA offers many years of experience and working with customers to provide solutions that meet any individual requirements. You may also use our venting calculator to compute the optimal application of our pressure equalisation products.

德国Wiska尼龙电缆接头系列（UL认证）
德国Wiska代理商：上海颐品自动化科技有限公司

关键词：德国Wiska电缆接头，Wiska尼龙电缆接头，Wiska金属电缆接头，

Wiska防爆尼龙电缆接头，Wiska防爆金属电缆接头，Wiska屏蔽电缆接头，

Wiska尼龙螺母，变径接头，闷盖；Wiska金属螺母，变径接头，堵头等

WISKA SPRINT EMSVG, VentGLAND, brass, metric, EN 62444

Protection class: IP68 / IP69 
Temperature range: -40 °C - 100 °C 
Material: Gland Brass nickel-plated, Gasket EPDM, Clamping cage Polyamide, Membrane ePTFE

SPRINT? EMSVG, VentGLAND?, brass, metric, EN   62444
WISKA	产品型号	产品材质	螺纹长度	螺纹规格	卡紧范围	扳手度	整体长度	包装单位
10065899	EMSVG 16	Nickel-plated	6 mm	M 16x1,5	4,5 mm - 10 mm	20 mm	34 mm - 42 mm	1
10065900	EMSVG 20	Nickel-plated	6 mm	M 20x1,5	6 mm - 13 mm	24 mm	41 mm - 50 mm	1
10065901	EMSVG 25	Nickel-plated	7 mm	M 25x1,5	9 mm - 17 mm	29 mm	43 mm - 52 mm	1
10065902	EMSVG 32	Nickel-plated	8 mm	M 32x1,5	13 mm - 21 mm	36 mm	47 mm - 56 mm	1
10065903	EMSVG 40	Nickel-plated	8 mm	M 40x1,5	16 mm - 28 mm	46 mm	57 mm - 70 mm	1
10065904	EMSVG 50	Nickel-plated	9 mm	M 50x1,5	21 mm - 35 mm	55 mm	64 mm - 77 mm	1
10065905	EMSVG 63	Nickel-plated	10 mm	M 63x1,5	34 mm - 48 mm	68 mm	69 mm - 83 mm	1

Cable glands with pressure equalisation

Breathable cable glands that work against the formation of condensation

Electrical installations and moisture do not go well together. They lead to power failures in electrical casings, sensors and electrical devices. The danger of short circuits – and thus electrical breakdowns, shortages and disruption of operation – increases wherever there is water. In order to find a solution to this problem, it is necessary to understand how condensation forms.

How does condensation form?

Pressure, temperature and air moisture are constantly changing. Even electrical installations, which must be secured in sealed casings in order to be protected against moisture, are subject to the formation of condensation. The reason: Whether caused by climate or operational conditions, fast fluctuations in temperatures create a disparity in pressure between the inside and outside of the casing. This happens when there is rain, wave impact or entry to a tunnel. Because of the vacuum inside the casing, moist air from outside is sucked in, i.e. through the casing’s seal. Inside the casing, the moist air condenses and causes corrosion or a short circuit.

How does condensation enter the casing?

1. The casing becomes warm when in use.

3. There may be a temperature difference between the inside and outside of the casing at night or after being shut off. The temperature difference creates a vacuum which causes air to flow in from the outside.

5. If the air inside of the casing cools down and pressure equalisation does not occur, condensation will form and become trapped which can cause an electrical breakdown or short circuit.

Why Venting?

Hermetically sealed enclosures are insufficient to protect electrical installations from moisture and contaminants. Fluctuating temperatures and environmental factors, especially during outdoor usage, create pressure inside tightly sealed enclosures. This leads to a build-up of condensation as well as damage to the seal that can result in the penetration of moisture and dirt.

Breathable venting products from WISKA ensure effective pressure equalisation between the interior and exterior. This reduces stress on the seal and maintains the enclosure′s protection classes. Venting products from WISKA therefore help to increase operational safety and extend the service lives of electrical installations. This has a sustaining positive effect on maintenance costs.

德国Wiska尼龙电缆接头系列（UL认证）

德国Wiska代理商：上海颐品自动化科技有限公司

WISKA	产品型号	螺纹规格	产品颜色	螺纹长度	卡紧范围	扳手度	整体长度	包装单位
10066410	ESKV 12	M 12x1,5	RAL 7035	9 mm	3 mm - 7 mm	16 mm	29 mm - 34 mm	50
10066411	ESKV 16	M 16x1,5	RAL 7035	9 mm	4,5 mm - 10 mm	20 mm	31 mm - 37 mm	50
10066412	ESKV 20	M 20x1,5	RAL 7035	10 mm	6 mm - 13 mm	24 mm	36 mm - 45 mm	50
10061789	ESKV 20 PLUS	M 20x1,5	RAL 7035	10 mm	7,5 mm - 14 mm	24 mm	36 mm - 45 mm	50
10066413	ESKV 25	M 25x1,5	RAL 7035	10 mm	9 mm - 17 mm	29 mm	38 mm - 47 mm	50
10066414	ESKV 32	M 32x1,5	RAL 7035	12 mm	13 mm - 21 mm	36 mm	42 mm - 51 mm	25
10066415	ESKV 40	M 40x1,5	RAL 7035	12 mm	16 mm - 28 mm	46 mm	52 mm - 65 mm	10
10066416	ESKV 50	M 50x1,5	RAL 7035	14 mm	21 mm - 35 mm	55 mm	59 mm - 72 mm	4
10066417	ESKV 63	M 63x1,5	RAL 7035	15 mm	34 mm - 48 mm	68 mm	64 mm - 78 mm	3
10066120	ESKV 12	M 12x1,5	RAL 9005	9 mm	3 mm - 7 mm	16 mm	29 mm - 34 mm	50
10066121	ESKV 16	M 16x1,5	RAL 9005	9 mm	4,5 mm - 10 mm	20 mm	31 mm - 37 mm	50
10066122	ESKV 20	M 20x1,5	RAL 9005	10 mm	6 mm - 13 mm	24 mm	36 mm - 45 mm	50
10061864	ESKV 20 PLUS	M 20x1,5	RAL 9005	10 mm	7,5 mm - 14 mm	24 mm	36 mm - 45 mm	50
10066123	ESKV 25	M 25x1,5	RAL 9005	10 mm	9 mm - 17 mm	29 mm	38 mm - 47 mm	50
10066124	ESKV 32	M 32x1,5	RAL 9005	12 mm	13 mm - 21 mm	36 mm	42 mm - 51 mm	25
10066125	ESKV 40	M 40x1,5	RAL 9005	12 mm	16 mm - 28 mm	46 mm	52 mm - 65 mm	10
10066126	ESKV 50	M 50x1,5	RAL 9005	14 mm	21 mm - 35 mm	55 mm	59 mm - 72 mm	4
10066127	ESKV 63	M 63x1,5	RAL 9005	15 mm	34 mm - 48 mm	68 mm	64 mm - 78 mm	3
10066380	ESKV 12	M 12x1,5	RAL 7001	9 mm	3 mm - 7 mm	16 mm	29 mm - 34 mm	50
10066381	ESKV 16	M 16x1,5	RAL 7001	9 mm	4,5 mm - 10 mm	20 mm	31 mm - 37 mm	50
10066382	ESKV 20	M 20x1,5	RAL 7001	10 mm	6 mm - 13 mm	24 mm	36 mm - 45 mm	50
1865	ESKV 20 PLUS	M 20x1,5	RAL 7001	10 mm	7,5 mm - 14 mm	24 mm	36 mm - 45 mm	50
10066383	ESKV 25	M 25x1,5	RAL 7001	10 mm	9 mm - 17 mm	29 mm	38 mm - 47 mm	50
10066384	ESKV 32	M 32x1,5	RAL 7001	12 mm	13 mm - 21 mm	36 mm	42 mm - 51 mm	25
10066385	ESKV 40	M 40x1,5	RAL 7001	12 mm	16 mm - 28 mm	46 mm	52 mm - 65 mm	10
10066386	ESKV 50	M 50x1,5	RAL 7001	14 mm	21 mm - 35 mm	55 mm	59 mm - 72 mm	4
10066387	ESKV 63	M 63x1,5	RAL 7001	15 mm	34 mm - 48 mm	68 mm	64 mm - 78 mm	3

德国Wiska主要产品类别如下：

1、上海颐品-WISKA尼龙电缆接头及附件（Wiska cable gland）

SPRINT尼龙电缆接头及附件：ESKV、ESKV-L、ESKV LT、ESKV-L LT、ESKV-SET、ESKV-RDE、ESKV-F、SKV、NSKV、ESKV、ESKVS-L、SKVS、ESKVZ、ESKVZ-L、EMUG、MUG、EMUF、EVSGS、VSG、KEM、KEP、KRM、KRP、EWI90等系列