供应 LEXAN PC 243R
| 价格 | ￥22.50/KG | |
| 起订量 | ≥25 | |
| 所在地 | 江苏 苏州 | 可售量 10000KG |
联系人：
邓 先生
身份已验证
手机已验证
微信已验证
쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
솖ꁥ쎐젤-쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
手机扫码快速拨号
产品推荐
-
￥18元
供应英力士ABS 450 Novodur
-
￥35元
供应PC Makrolon 2667
-
￥28元
供应PC Makrolon 2858
-
￥35元
供应PC Makrolon 2467
-
￥18元
供应英力士ABS 250 Novodur
免费会员 第6年
苏州寅旭塑化有限公司
联 系 人：邓 先生 (联系时,请说明是在全球塑胶网上看到的)
联系电话：솖ꁥ쎐젤-쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
手机号码：쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
公司官网： http://18114591336.51pla.com
所在地区：江苏省 苏州市
扫一扫，加我微信
进入店铺最新产品
-
供应英力士ABS 450 Novodur
￥18元
-
供应PC Makrolon 2667
￥35元
-
供应PC Makrolon 2858
￥28元
-
供应PC Makrolon 2467
￥35元
-
供应英力士ABS 250 Novodur
￥18元
基本参数
| 牌号 | LEXAN 243R | 厂家(产地) | 美国/欧洲/亚洲 |
| 品牌 | LEXAN | 材质 | PC |
| 销售方式 | 品牌经销 | 颜色 | 透明 |
| 加工级别 | 注塑 | 用途级别 | 注塑 |
| 透明度 | 82 | 厂商 | 沙比克 |
243R
10.5 MFR. UV-stabilized. Improved flame retardance. Internal mold release.
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| MECHANICAL | ||||
| Taber Abrasion, CS-17, 1 kg | 10 | mg/1000cy | SABIC method | |
| Tensile Stress, yield, 50 mm/min | 63 | MPa | ISO 527 | |
| Tensile Stress, break, 50 mm/min | 70 | MPa | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 6 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 110 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 2350 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 90 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 2300 | MPa | ISO 178 | |
| Ball Indentation Hardness, H358/30 | 95 | MPa | ISO 2039-1 | |
| IMPACT | ||||
| Izod Impact, unnotched 80*10*3 +23°C | NB | kJ/m2 | ISO 180/1U | |
| Izod Impact, unnotched 80*10*3 -30°C | NB | kJ/m2 | ISO 180/1U | |
| Izod Impact, notched 80*10*3 +23°C | 70 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*3 -30°C | 12 | kJ/m2 | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 73 | kJ/m2 | ISO 179/1eA | |
| Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm | 14 | kJ/m2 | ISO 179/1eA | |
| Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| Charpy Impact, notched, 23°C | 35 | kJ/m2 | ISO 179/2C | |
| THERMAL | ||||
| Thermal Conductivity | 0.2 | W/m-°C | ISO 8302 | |
| CTE, 23°C to 80°C, flow | 7.E-05 | 1/°C | ISO 11359-2 | |
| Ball Pressure Test, 125°C +/- 2°C | PASSES | - | IEC 60695-10-2 | |
| Vicat Softening Temp, Rate A/50 | 153 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/50 | 141 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 142 | °C | ISO 306 | |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 136 | °C | ISO 75/Be | |
| HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 125 | °C | ISO 75/Ae | |
| Relative Temp Index, Elec | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 130 | °C | UL 746B | |
| PHYSICAL | ||||
| Mold Shrinkage on Tensile Bar, flow | 0.5-0.7 | % | SABIC method | |
| Density | 1.2 | g/cm3 | ISO 1183 | |
| Water Absorption, (23°C/saturated) | 0.35 | % | ISO 62-1 | |
| Moisture Absorption (23°C / 50% RH) | 0.15 | % | ISO 62 | |
| Melt Volume Rate, MVR at 300°C/1.2 kg | 12 | cm3/10 min | ISO 1133 | |
| OPTICAL | ||||
| Light Transmission, 2.54 mm | 88-90 | % | ASTM D 1003 | |
| Haze, 2.54 mm | <0.8 | % | ASTM D 1003 | |
| Refractive Index | 1.586 | - | ISO 489 | |
| ELECTRICAL | ||||
| Volume Resistivity | >1.E+15 | Ohm-cm | IEC 60093 | |
| Surface Resistivity, ROA | >1.E+15 | Ohm | IEC 60093 | |
| Dielectric Strength, shorttime, 1.0mm | 15 | kV/mm | IEC 60243-1 | |
| Dielectric Strength, in oil, 3.2 mm | 17 | kV/mm | IEC 60243-1 | |
| Relative Permittivity, 1 MHz | 2.7 | - | IEC 60250 | |
| Dissipation Factor, 50/60 Hz | 0.001 | - | IEC 60250 | |
| Dissipation Factor, 1 MHz | 0.01 | - | IEC 60250 | |
| Relative Permittivity, 50/60 Hz | 2.7 | - | IEC 60250 | |
| FLAME CHARACTERISTICS | ||||
| UL Yellow Card Link | E45329-103028645 | - | - | |
| UL Yellow Card Link 2 | E45329-236646 | - | - | |
| UL Recognized, 94V-2 Flame Class Rating | 0.75 | mm | UL 94 | |
| UL Recognized, 94V-0 Flame Class Rating | 6 | mm | UL 94 | |
| Glow Wire Flammability Index 850°C, passes at | 1 | mm | IEC 60695-2-12 | |
| Oxygen Index (LOI) | 25 | % | ISO 4589 | |
| INJECTION MOLDING | ||||
| Drying Temperature | 120 | °C | ||
| Drying Time | 2-4 | hrs | ||
| Maximum Moisture Content | 0.02 | % | ||
| Melt Temperature | 280-310 | °C | ||
| Nozzle Temperature | 270-290 | °C | ||
| Front - Zone 3 Temperature | 280-310 | °C | ||
| Middle - Zone 2 Temperature | 270-290 | °C | ||
| Rear - Zone 1 Temperature | 260-280 | °C | ||
| Hopper Temperature | 60-80 | °C | ||
| Mold Temperature | 80-110 | °C |
| REVISION: 21/04/2020 Compare this region | ||||
|---|---|---|---|---|
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
| MECHANICAL | ||||
| Tensile Stress, yld, Type I, 50 mm/min | 62 | MPa | ASTM D 638 | |
| Tensile Stress, brk, Type I, 50 mm/min | 65 | MPa | ASTM D 638 | |
| Tensile Strain, yld, Type I, 50 mm/min | 7 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 110 | % | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 93 | MPa | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 2340 | MPa | ASTM D 790 | |
| Hardness, Rockwell M | 70 | - | ASTM D 785 | |
| Hardness, Rockwell R | 118 | - | ASTM D 785 | |
| Taber Abrasion, CS-17, 1 kg | 10 | mg/1000cy | ASTM D 1044 | |
| IMPACT | ||||
| Izod Impact, unnotched, 23°C | 3204 | J/m | ASTM D 4812 | |
| Izod Impact, notched, 23°C | 694 | J/m | ASTM D 256 | |
| Tensile Impact Strength, Type S | 546 | kJ/m2 | ASTM D 1822 | |
| Falling Dart Impact (D 3029), 23°C | 169 | J | ASTM D 3029 | |
| Izod Impact, unnotched 80*10*3 23°C | NB | kJ/m2 | ISO 180/1U | |
| Izod Impact, unnotched 80*10*3 -30°C | NB | kJ/m2 | ISO 180/1U | |
| Izod Impact, notched 80*10*3 23°C | 65 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*3 -30°C | 11 | kJ/m2 | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 65 | kJ/m2 | ISO 179/1eA | |
| Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm | 12 | kJ/m2 | ISO 179/1eA | |
| Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| THERMAL | ||||
| Vicat Softening Temp, Rate B/50 | 154 | °C | ASTM D 1525 | |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 137 | °C | ASTM D 648 | |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 132 | °C | ASTM D 648 | |
| CTE, -40°C to 95°C, flow | 6.84 | 1/°C | ASTM E 831 | |
| Specific Heat | 1.26 | J/g-°C | ASTM C 351 | |
| Thermal Conductivity | 0.25 | W/m-°C | ASTM C177 | |
| Relative Temp Index, Elec | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 130 | °C | UL 746B | |
| PHYSICAL | ||||
| Specific Gravity | 1.2 | - | ASTM D 792 | |
| Specific Volume | 0.83 | cm3/g | ASTM D 792 | |
| Density | 1.19 | g/cm3 | ASTM D 792 | |
| Water Absorption, (23°C/24hrs) | 0.15 | % | ASTM D 570 | |
| Water Absorption, (23°C/Saturated) | 0.35 | % | ASTM D 570 | |
| Water Absorption, equilibrium, 100°C | 0.58 | % | ASTM D 570 | |
| Mold Shrinkage, flow, 3.2 mm | 0.5-0.7 | % | SABIC method | |
| Melt Flow Rate, 300°C/1.2 kgf | 17.5 | g/10 min | ASTM D 1238 | |
| OPTICAL | ||||
| Light Transmission, 2.54 mm | 88 | % | ASTM D 1003 | |
| Haze, 2.54 mm | 1 | % | ASTM D 1003 | |
| Refractive Index | 1.586 | - | ASTM D542 | |
| ELECTRICAL | ||||
| Volume Resistivity | >1.E 17 | Ohm-cm | ASTM D 257 | |
| Dielectric Strength, in air, 3.2 mm | 15 | kV/mm | ASTM D 149 | |
| Relative Permittivity, 50/60 Hz | 3.17 | - | ASTM D 150 | |
| Relative Permittivity, 1 MHz | 2.96 | - | ASTM D 150 | |
| Dissipation Factor, 50/60 Hz | 0.0009 | - | ASTM D 150 | |
| Dissipation Factor, 1 MHz | 0.01 | - | ASTM D 150 | |
| FLAME CHARACTERISTICS | ||||
| UL Yellow Card Link | E121562-104338122 | - | - | |
| UL Recognized, 94V-2 Flame Class Rating | 0.75 | mm | UL 94 | |
| INJECTION MOLDING | ||||
| Drying Temperature | 120 | °C | ||
| Drying Time | 3-4 | hrs | ||
| Drying Time (Cumulative) | 48 | hrs | ||
| Maximum Moisture Content | 0.02 | % | ||
| Melt Temperature | 280-305 | °C | ||
| Nozzle Temperature | 275-300 | °C | ||
| Front - Zone 3 Temperature | 280-305 | °C | ||
| Middle - Zone 2 Temperature | 270-295 | °C | ||
| Rear - Zone 1 Temperature | 260-280 | °C | ||
| Mold Temperature | 70-95 | °C | ||
| Back Pressure | 0.3-0.7 | MPa | ||
| Screw Speed | 40-70 | rpm | ||
| Shot to Cylinder Size | 40-60 | % | ||
| Vent Depth | 0.025-0.076 | mm | ||
联系方式
苏州寅旭塑化有限公司
联系人：
邓 先生
服务热线：
쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
솖ꁥ쎐젤-쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
公司地址：
中国江苏苏州太仓市浮桥镇华东国际塑化城9-3栋13号
该企业其他产品
-
供应 英力士ABS Lustran 556 低光泽 ￥15.5元
-
ABS EGP-7 英力士ABS￥15.5元
-
英力士高光ABS Lustran 451 ￥18.5元
-
供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元
-
锦湖ABS HU600PF喷涂级￥21.5元
-
锦湖ABS H2938L耐热喷涂级￥21.5元
-
锦湖ABS HU651耐热耐候￥21.5元
-
锦湖ABS HU601耐热￥21.5元
供应 LEXAN PC 243R相关产品
- 厂家批发 蓝色6mm中空透明板 PC阳光板 温室大棚PC板
- PC 上海科思创（拜耳） 2407塑胶原料PC 塑料
- PC塑胶原料 PC 上海科思创（拜耳） 2405价格
- 塑胶原料PC 上海科思创（拜耳） 2405
- V-2阻燃级塑胶原料PC 上海科思创（拜耳） 2407
- PC上海科思创（拜耳） 2456高流动塑胶原料PC
- 通用塑料原料PC 上海科思创（拜耳） 2458
- 注塑级PC塑料原料上海科思创（拜耳） 2605
- 脱模性塑料原料PC上海科思创（拜耳） 2665
- PC塑料原料上海科思创（拜耳）2805通用级注塑级中粘度
- PC塑胶原料 沙比克/sabicDX11354白色LDS塑料
- 抗紫外线PC塑料原料上海科思创（拜耳） 2807
- 挤出级PC塑料原料上海科思创（拜耳） 2856
- 塑料原料价格PC 上海科思创（拜耳） 2865
- V-2阻燃级塑胶原料PC 上海科思创（拜耳） 3103
- PC沙比克塑胶原料DX11355黑色LDS天线专用塑料
- PC塑胶原料批发上海科思创（拜耳） 3105
- PC塑胶原料厂家上海科思创（拜耳） 3206
猜你在找
- 现有颜色色号20+ 新料改性PC PC/ABS 白度88-99 可根据产品订制厂家塑料
- Makrolon AL2647 550396 紫外线稳定 汽车照明PC 易脱模
- Makrolon LQ2887 551277 镜片PC
- PC 沙伯基础 CRX9411-111N 医用级 生物相溶
- 专业食品级PC 台湾台化出光 IR2500 注塑级 脱模剂
- 塑宇 PC 阻燃级PC 山东利华维远 价格优惠
- 塑宇 PC 塑料聚碳酸酯树脂pc原料 薄膜塑胶原料pc 厂家直供
- 可替代热门牌号PC透明白底白底冲击70+溶脂10 黑点性能稳定塑料
- PC 沙伯基础 144R-111FC 食品级
- PC 日本出光 IRY2200 阻燃 中粘度 抗UV 电池盒 打印机电器外壳应用
- PC 日本出光 LC1500 高流动 高抗冲 应用液晶导光板
- 生产中专用料充电器外壳高光白色ABS改性厂家省钱原料
免责声明：以上展示的供应 LEXAN PC 243R信息由苏州寅旭塑化有限公司自行提供，内容的真实性、准确性和合法性由发布企业负责，
全球塑胶网对此不承担责任。
风险防范建议：为保障您的利益，建议优先选择速购通会员
手机版：供应 LEXAN PC 243R
更新产品链接为：https://www.51pla.com/html/sellinfo/414/41424704.htm
公司名片
手机号：
솖ꁥ쎐젤-쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
电话：
쎐젃쎐쎐ꁥ녥쎐ꅒꅒ
联系人：
邓 先生
公司名称：
苏州寅旭塑化有限公司
发送询价单
