数显鱼线拉伸强度测试仪

数显鱼线拉伸强度测试仪  使用条件：

    电源：～220 ±10% V / 50 Hz；

    温度:10 C -- 35 C；

湿度:30 % -- 85 %；

 

数显鱼线拉伸强度测试仪 技术参数：

最大负荷100，200，500，1000，2000，5000kg以内自选

精度等级0.5级

有效测力范围0.4％～100％（0.5级）

测力精度示值的±0.5％以内

试验机分辨率最大负荷1/200000，内外不分档，且全程分辨率不变

负荷传感器基本配置：拉、压传感器（最大负荷）一只

扩展配置：可加配多个传感器

有效试验宽度400mm(可按客户要求加宽)

有效拉伸空间800mm（可按客户要求加高）

试验速度范围50～300mm/min

位移测量精度示值的±0.5％以内

变形测量精度示值的±0.5％以内 （可根据客户要求选配大变形或小变形）

试台安全装置 电子限位保护

试台升降装置 快/慢两种速度自动控制，可点动

试台返回功能 手动或自动两种选择、试验结束后自动或手动以最高速度返回试验初始位置

超载保护 超过最大负荷10％，机器自动保护

夹具配置 拉伸夹具一套

主机尺寸1200*530*1800mm(长*宽*高)

动力系统 伺服电机或变频电机+高精度滚珠螺杆

电源220V/380V   50HZ、

功率 0．75KW（根据不同力值需求，标配不同功率电机）

主机重量（约）300 Kg

 

数显鱼线拉伸强度测试仪 功能特点：采用国外技术，全数字放大、采集，显示稳定、精度高、使用方便。采用铝合金外罩，主机采用直流或交流伺服电机、精密减速机、高精度丝杠、具有传动平稳、噪音低、速度精度高、调速范围宽，使用寿命长等特点；液晶实时显示，可显示试验力、峰值、位移、速度、试验状态等，外观大方，使用方便，操作简单；具有限位、过载自动保护、试样断裂自动停机等功能。配置标准拉伸附具一套。

 

仪表不显示

原因

1、输入电源不正常

2、保险丝坏

检查方法

1、检查电网电源

2、检查保险丝

 

维修保养方法及注意事项:

1、机台部份，外表经常擦拭，保持清洁。

2、电镀部份请以机油擦拭，以防止生锈宜保光亮。

3、动力螺杆及螺杆部份请加润滑油，以保传动灵敏。（润滑油采黄油加入少许机油混合即可）。

4、面板（控制箱即显示器）请用乾布擦拭，严防沾水，以免损坏IC电子零件。

5、各项治具及接头配件请妥置，并擦拭防锈油，以防生锈。

6、上下班必需把电源关掉。

 

Performance characteristics:

The microcomputer controlled electronic universal testing machine adopts foreign advanced design concept, with beautiful appearance, convenient operation, stable and reliable performance. The computer collects and controls through the full digital control system developed by our company, directly controls the rotation of the full digital speed regulating motor through the full digital speed regulating controller, and the motor speed is transmitted to the precision ball screw pair after decelerating through the arc synchronous deceleration system, so as to realize the rising and falling of the cross beam, and complete the tensile, peeling, compression and other mechanical property tests of the sample.

性能特点：

微机控制电子万能试验机、采用国外先进设计理念，外形美观、操作方便、性能稳定可靠。计算机通过我公司研制的全数字控制系统进行采集控制、经全数字调速控制器直接控制全数字调速电机转动、电机转速经圆弧同步减速系统减速后传递给精密滚珠丝杠副实现横梁上升、下降，完成试样的拉伸、剥离、压缩等力学性能试验。

 

Instrument features:

It is mainly used for the tensile, compression, bending, shearing, peeling, tearing and other tests of materials; the computer directly controls the AC servo speed regulating system and AC servo motor rotation through the full digital control system (PCI card) developed by our company, and the rotation speed of AC servo motor is transmitted to the precision ball screw pair after deceleration by the deceleration system, so as to realize the actions of beam rising, falling, testing, etc The tensile and compressive properties of the samples were tested.

The professional software of the testing machine can automatically calculate the elastic modulus, yield strength, tensile strength, fracture strength, sample elongation, stiffness of damping system, constant force for deformation, constant deformation for force and other data and indicators, which can meet the closed-loop control mode of constant displacement, constant stress and constant deformation, and the test process can be programmed and controlled according to the standard requirements.

The control and data processing of the test process by the computer control system meet the requirements of the corresponding national standards for metallic and non-metallic materials, and the test reports are diversified, such as word, Excel and so on.

This machine can be connected with PC, and upper computer software is optional. Real time display of force displacement, force time, displacement time, stress-strain curves, automatic calculation of maximum force, yield force, average force, maximum deformation, yield point, elastic modulus and other parameters, and flexible report editing and printing functions.

This series of products meet the requirements of GB / T 228-2002? GB / T 7314-2005? GB / T 14452-1993? GB / T 8653-1988? GB 1040, GB 1041? GB 9341, GB 8804, GB 16491, ISO, ASTM, JIS, DIN, etc

 

Function introduction

1) Automatic stop: after the sample is damaged, the moving beam will stop moving automatically (or return to the initial position automatically)

2) Automatic shift: automatically switch to the appropriate range according to the test force to ensure the accuracy of measurement data

3) Condition module: the original data of test conditions and samples can be stored in the form of their own standard module, which is convenient for users to call and view and saves test time

4) Automatic transmission: the displacement speed of the test process can be automatically completed or manually changed

5) Automatic saving: after the test, the test data and curve will be automatically saved by computer to prevent data loss caused by forgetting to save

6) Test process: the test process, measurement, display and analysis are completed by microcomputer

7) Batch test: for the samples with the same parameters, one batch of tests can be completed in sequence after one setting

8) Test software: Chinese Windows user interface, easy to operate

9) Display mode: data and curve are displayed dynamically with the test process

10) Curve traversal: after the test, the curve can be enlarged and analyzed, and the corresponding data of each point on the test curve can be found with the mouse

11) Test report: it can be edited and printed according to user's requirements

12) Limit protection: with program control and mechanical two-level limit protection

13) Overload protection: when the load exceeds 3-5% of the rated value, it will stop automatically

14) Automatic and manual two modes to get all kinds of test results, automatically form a report, so that the data analysis process becomes simple, convenient for users

This series of testing machine conforms to the national standard, the structure is: single column + double column, the type is: liquid crystal display + microcomputer control, the maximum test force: 0-300kn, can be customized according to customer demand.

 

售后服务承诺：

(1) 质量保证：北京北广精仪仪器设备有限公司作为设备供应商，我公司对所提供的产品均为厂家原厂原包装，符合国家标准，并提供产品技术资料(包含安装说明书，产品装箱目录、产品中文使用说明书、合格证及保修凭证等)。

(2) 产品交货期：尽量按用户要求，若有特殊要求，需提前完工的，我公司可特别组织生产、安装，力争满足用户需求。

(3) 保修承诺：北京北广精仪仪器设备有限公司所有产品质保三年，我司对本次协议供货有效期内所提供的所有产品保质期，有效期内所提供的产品，提供正常工作日全天侯服务，终身技术服务支持。

(4) 响应时间：保修期内，产品若发生故障，在接到贵公司报修后，24小时内帮客户解决问题。

(5) 服务体系：作为设备供应商本公司对本次招标所提供的产品提供保障体系：当设备出现故障，必要时将派指定的专业技术员在规定时间内上门维修或寄修，产生的运费由本公司承担。

(6) 上门调试：在货物到达客户指定地点后，需要安装调试的我单位会派一名专业技术人员到现场进行免费安装培训。

 

北广产品销往北京、上海、广东、河南、浙江、河北、江苏、湖南、内蒙、山东、四川、广州、江西、西北、云南、深圳、吉林、南京、嘉兴、佛山、苏州、杭州、西安、潥阳、长春、江苏、平顶山、安徽、金水、金华、海南、廊坊、天津、成都、扬州、东莞、济南、南通、株洲、保定、贵州、宜兴、嘉兴、黑龙江、漳州、成都、重庆、咸阳、济南、绍兴、杭州、拉萨、山西、惠州、沧州、江西、沈阳、武汉、沈阳、昆明、鹤山、许昌、青海、宁波、醴陵、淄博、瑞安、阜新、合肥、长沙、常州、瑞安、青岛、无锡、济宁、醴陵、厦门、河源、乐清、烟台、福州、龙口、徐州、唐山等地销售。

 

 

公司承诺：

1.购机前，我们专门派技术人员为您设计的流程和方案

2.购机后，将免费指派技术人员为您调试安装

3.整机保修一年，产品终身维护