【切换城市】
7×24小时咨询热线：400-668-0255 我的塑胶网 会员商务室 帮助中心
苏州寅旭塑化有限公司
苏州寅旭塑化有限公司
  • 入驻年限：6年
  • 所 在 地：江苏省 苏州市
  • 主营产品： 塑胶原料及产品 化工原料及产品
进入店铺 我要询盘
vip

进入移动商铺

免费会员第 6 年 vip
苏州寅旭塑化有限公司
主营产品： 塑胶原料及产品, 化工原料及产品,
如实描述 用心服务 品质保障
류퀕쁢펆펆
当前位置： 首页 > 产品大全 > PA6 > PA6 > 供应杜邦73G35HSL BK262 35%玻纤增强PA6

供应杜邦73G35HSL BK262 35%玻纤增强PA6

价格 ￥25.00/ KG
起订量 ≥25
所在地 江苏 苏州 可售量 10000 KG
联系人： 邓 先生
身份已验证
手机已验证
微信已验证

류퀕쁢펆펆

텹쁢욒-류퀕쁢펆펆

手机扫码快速拨号

手机扫码

产品推荐

免费会员 第6年

苏州寅旭塑化有限公司

联 系 人：邓 先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：텹쁢욒-류퀕쁢펆펆

手机号码：류퀕쁢펆펆

公司官网： http://18114591336.51pla.com

所在地区：江苏省 苏州市

主营产品： 塑胶原料及产品, 化工原料及产品,

二维码

扫一扫，加我微信

进入店铺
产品分类
最新产品
商品详情 联系方式

进入手机版

基本参数

牌号 ZYTEL 厂商 美国杜邦
填充 35%玻纤 热性能 热稳定
加工 注塑级 产地 中国
形状 颗粒 包装 25KG

Zytel? 73G35HSL BK262

NYLON RESIN
PA6-GF35
CHARACTERISTICS
Processing
Injection Molding
Delivery form
Pellets
Additives
Lubricants, Release agent
Special characteristics
Heat stabilized or stable to heat
PRODUCT TEXT

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

 

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

 

Zytel? 73G35HSL BK262 is a 35% glass fiber reinforced, heat stabilized, black polyamide 6 resin for injection molding.

 

PRODUCT INFORMATION

DRY/COND.
TEST NORM
Resin Identification
PA6-GF35
ISO 1043
Part Marking Code
>PA6-GF35<
ISO 11469
ISO designation
ISO 16396-PA6,GF35,M1CGHR,S14-110
-

REGULATORY

Regulatory Information Sheet (RIS)
SVHC Declaration
ZYTEL - SVHC Statement
Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Viscosity number
143/*
cm3/g
ISO 307, 1157, 1628
Molding shrinkage, parallel
0.1/-
%
ISO 294-4, 2577
Molding shrinkage, normal
0.6/-
%
ISO 294-4, 2577

MECHANICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Tensile Modulus
11000/6500
MPa
ISO 527-1/-2
Stress at break
190/120
MPa
ISO 527-1/-2
Strain at break
3.2/6
%
ISO 527-1/-2
Flexural Modulus
9500/6000
MPa
ISO 178
Flexural Strength
280/150
MPa
ISO 178
Tensile creep modulus, 1h
*/6000DS
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/5000DS
MPa
ISO 899-1
Charpy impact strength, 73°F
85/90
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
90/90
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
14/22
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
10/10
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
11/12
kJ/m2
ISO 179/1eA
Puncture energy, 73°F
3/6
J
ISO 6603-2
Izod notched impact strength, 73°F
13/20
kJ/m2
ISO 180/1A
Poisson's ratio
0.34/0.35
-
-
DS: Derived from similar grade

THERMAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
221/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
55/-
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
208/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
220/*
°C
ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf
215/*
°C
ISO 306
Coeff. of linear therm. expansion, parallel
19/*
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
100/*
E-6/K
ISO 11359-1/-2
RTI, electrical, 60mil
65
°C
UL 746B
RTI, impact, 60mil
65
°C
UL 746B
RTI, strength, 60mil
65/*
°C
UL 746B

FLAMMABILITY

DRY/COND.
UNIT
TEST NORM
Burning Behav. at 60mil nom. thickn.
HB/*
class
IEC 60695-11-10
Thickness tested
1.5/*
mm
IEC 60695-11-10
UL recognition
yes/*
-
UL 94
FMVSS Class
B
-
ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm
24
mm/min
ISO 3795 (FMVSS 302)

OTHER PROPERTIES

DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
2.1/*
%
Sim. to ISO 62
Water absorption, 80mil
5.8/*
%
Sim. to ISO 62
Density
1410/-
kg/m3
ISO 1183
Water Absorption, Immersion 24h
1/*1
%
Sim. to ISO 62
1: wall thickness 3mm

INJECTION

DRY/COND.
UNIT
Drying Recommended
yes
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
270
°C
Min. melt temperature
260
°C
Max. melt temperature
280
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
100
°C
Min. mold temperature
70
°C
Max. mold temperature
120
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm

CHEMICAL MEDIA RESISTANCE

Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Motor oil OS206 304 Ref.Eng.Oil, ISP, 135°C
Automatic hypoid-gear oil Shell Donax TX, 135°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C

DIAGRAMS

Viscosity-shear rate Zytel? 73G35HSL BK262 1E2 1E3 1E4 Shear rate in 1/s 1E1 1E2 1E3 Viscosity in Pa.s 260 °C 270 °C 280 °C 290 °C 300 °C
Shearstress-shear rate Zytel? 73G35HSL BK262 1E2 1E3 1E4 Shear rate in 1/s 1E4 1E5 1E6 Shearstress in Pa 260 °C 270 °C 280 °C 290 °C 300 °C
Dynamic Tensile modulus-temperature Zytel? 73G35HSL BK262 (dry) -100 0 100 200 Temperature in °C 1E0 1E1 1E2 1E3 1E4 1E5 Dyn. Tensile modulus in MPa 0 0.02 0.04 0.06 0.08 0.1 tan d 1E-2 1E-1 1E0 1E1 1E2 1E3 E'' MPa
Stress-strain Zytel? 73G35HSL BK262 (dry) B - Break 0 5 10 15 Strain in % 0 100 200 300 Stress in MPa B B B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Stress-strain Zytel? 73G35HSL BK262 (cond.) B - Break 0 2 4 6 8 Strain in % 0 100 200 300 Stress in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Secant modulus-strain Zytel? 73G35HSL BK262 (dry) B - Break 0 5 10 15 Strain in % 0 5000 10000 15000 Secant modulus in MPa B B B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Secant modulus-strain Zytel? 73G35HSL BK262 (cond.) B - Break 0 2 4 6 8 Strain in % 0 5000 10000 15000 Secant modulus in MPa B B B B B B B B -20 °C 0 °C 23 °C 40 °C 60 °C 90 °C 120 °C 150 °C
Stress-strain (isochronous) 23 °C Zytel? 73G35HSL BK262 (cond.) 0 1 2 3 Strain in % 0 20 40 60 Stress in MPa 1 h 10 h 100 h 1000 h 10000 h
Creep modulus-time 23 °C Zytel? 73G35HSL BK262 (cond.) 1E0 1E1 1E2 1E3 1E4 Time in h 2000 3000 4000 5000 6000 Creep modulus in MPa 10 MPa 20 MPa 30 MPa 40 MPa 50 MPa 55 MPa
Stress-strain (isochronous) 150 °C Zytel? 73G35HSL BK262 (dry) 0 1 2 3 4 Strain in % 0 10 20 30 40 50 Stress in MPa 1 h 10 h 100 h 1000 h
Creep modulus-time 150 °C Zytel? 73G35HSL BK262 (dry) 1E0 1E1 1E2 1E3 Time in h 1000 1500 2000 2500 Creep modulus in MPa 5 MPa 10 MPa 15 MPa 20 MPa 25 MPa 30 MPa 35 MPa 40 MPa
Tensile modulus-temperature Zytel? 73G35HSL BK262 (dry) -100 0 100 200 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Tensile modulus-temperature Zytel? 73G35HSL BK262 (cond.) -50 0 50 100 150 Temperature in °C 1E3 1E4 1E5 Tensile modulus in MPa
Coeff. of linear thermal expansion Zytel? 73G35HSL BK262 -100 0 100 200 Temperature in °C 12 14 16 18 20 22 CLTEp in E-6/K -50 0 50 100 150 200 CLTEn in E-6/K
Tensile Fatigue, 10Hz, R=0.1 @ 4 mm Zytel? 73G35HSL BK262 (cond.) 1E2 1E3 1E4 1E5 1E6 1E7 Cycles 40 50 60 70 80 Stress in MPa 150 °C
LTHA-Stress at Break 4 mm Zytel? 73G35HSL BK262 0 2000 4000 6000 8000 Time in h 0 50 100 150 200 StressB in MPa 140 °C 180 °C 190 °C 210 °C
LTHA-Strain at Break 4 mm Zytel? 73G35HSL BK262 0 2000 4000 6000 8000 Time in h 0 1 2 3 4 StrainB in % 140 °C 180 °C 190 °C 210 °C

该企业其他产品

  • 供应 英力士ABS Lustran 556 低光泽 ￥15.5元

  • ABS EGP-7 英力士ABS￥15.5元

  • 英力士高光ABS Lustran 451 ￥18.5元

  • 供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元

  • 锦湖ABS HU600PF喷涂级￥21.5元

  • 锦湖ABS H2938L耐热喷涂级￥21.5元

  • 锦湖ABS HU651耐热耐候￥21.5元

  • 锦湖ABS HU601耐热￥21.5元

供应杜邦73G35HSL BK262 35%玻纤增强PA6相关产品

猜你在找

免责声明：以上展示的供应杜邦73G35HSL BK262 35%玻纤增强PA6信息由苏州寅旭塑化有限公司自行提供，内容的真实性、准确性和合法性由发布企业负责， 全球塑胶网对此不承担责任。
风险防范建议：为保障您的利益，建议优先选择速购通会员
手机版：供应杜邦73G35HSL BK262 35%玻纤增强PA6
更新产品链接为：https://www.51pla.com/html/sellinfo/435/43564872.htm

全球塑胶网 杭州酷软科技有限公司 版权所有 © 2008-2020 www.51pla.com 浙ICP备13013211号 SEO 找商网

咨询热线:400-668-0255 公司传真：0571-87205660

浙公网安备 33010602002378号