粒状PC/ABS性能CY5211原包料

SABIC Cycoloy系列PC/ABS简介

PC/ABS，聚碳酸酯和丙烯腈-丁二烯-苯乙烯共聚物和混合物，是由聚碳酸酯（Polycarbonate）和聚丙烯腈（ABS）合金而成的热可塑性塑胶，结合了两种材料的优异特性，ABS材料的成型性和PC的机械性、冲击强度和耐温、抗紫外线（UV）等性质，可广泛使用在汽车内部零件、商务机器、通信器材、家电用品及照明设备上。

应用范围

1.汽车内外饰：仪表板，饰柱，仪表前盖，格栅，内外饰件

2.商务设备机壳和内置部件：笔记本/台式电脑，复印机，打印机，绘图仪，显示器

3.电信，移动电话外壳，附件以及智能卡（SIM卡）：

4.电器产品，电子产品外壳，电表罩和壳体，家用开关，插头和插座，电缆电线管道

5.家用电器，如洗衣机，吹风机，微波炉内外部件[3]

注塑模工艺条件

干燥处理：加工前的干燥处理是必须的。湿度应小于0.04%，建议干燥条件为90~110C，2~4小时。

熔化温度： 230~300C。

模具温度：50~100C。

注射压力：取决于塑件。

注射速度：尽可能地高。

化学和物理特性: PC/ABS具有PC和ABS两者的综合特性。例如ABS的易加工特性和PC的优良机械特性和热稳定性。二者的比率将影响PC/ABS材料的热稳定性。PC/ABS这种混合材料还显示了优异的流动特性。收缩率在0.5%左右

特点PC/ABS是一种通过混炼后合成的改性工程塑料。其中，PC就是聚碳酸脂，ABS就是丙烯腈（A）、丁二烯（B）和苯乙 烯（S）的共聚物。这种改性塑料比单纯的PC和ABS性能更好，例如：抗冲击性提高，耐热性提高，硬度提高等等。

特点：

1、综合性能较好,冲击强度较高,化学稳定性,电性能良好.

2、与372有机玻璃的熔接性良好,制成双色塑件,且可表面镀铬,喷漆处理.

3、有高抗冲、高耐热、阻燃、增强、透明等级别。

4、流动性比HIPS差一点，比PMMA、PC等好，柔韧性好。

5、机械性能的卓越平衡

6、低温时也具备高冲击强度

7、室内紫外线稳定性

8、较高的热变形温度（80～125℃）

9、耐燃性（UL945VB）

10、色彩范围广泛

11、 易于注塑和挤塑，吹塑加工

12、良好的电镀性

13、一般密度在1.05-1.20间

SABIC Cycoloy系列PC/ABS介绍；

Lexan 201 7.0 MFR, for thicker sections without sinks.

Lexan 203 7.0 MFR, for thicker sections without sinks. Improved flame retardance.

Lexan 221 17.5 MFR, for small, intricate parts. Improved flame retardance.

Lexan 241 10.5 MFR. Improved flame retardance.

Lexan 243 10.5 MFR. UV-stabilized. Improved flame retardance.

Lexan 920 Opaque colors, low viscosity, superior flame retardance.

Lexan 920A Low viscosity injection moldable, flame retardant PC.

Lexan 920ASR More robust design of standard 900 series flame retardant grade.

Lexan 923 Opaque colors, low viscosity, superior flame retardance.

Lexan 923A Low viscosity, flame retardant with exceptional surface.

Lexan 923ASR More robust design of standard 900 series flame retardant grade.

Lexan 940 Opaque colors, medium viscosity, superior flame retardance.

Lexan 940A Medium viscosity, flame retardant PC. Exceptional surface.

Lexan 940ASR More robust design of standard 900 series flame retardant grade.

Lexan 943 Opaque colors, medium viscosity, superior flame retardance.

Lexan 943A Medium viscosity, superior flame retardance.

Lexan 943ASR More robust design of standard 900 series flame retardant grade.

Lexan 950 Opaque colors, high viscosity, superior flame retardance.

Lexan 950A Transparent, clear and colors, high viscosity, flame retardant with exceptional surface.

Lexan 953 Opaque colors, high viscosity, superior flame retardance.

Lexan 953A Clear, tints and opaque colors, high viscosity, flame retardant with exceptional surface.

Lexan 121 Nonhalogenated. 17.5 MFR, for small intricate parts.

Lexan 121R Nonhalogenated. 17.5 MFR, for small, intricate parts.

Lexan 123 Nonhalogenated. 17.5 MFR, for small, intricate parts.

Lexan 123R Nonhalogenated. 17.5 MFR, for small, intricate parts.

Lexan 141 Nonhalogenated. 10.5 MFR.

Lexan 141R Nonhalogenated. 10.5 MFR.

Lexan 143 Nonhalogenated. 10.5 MFR.

Lexan 143R Nonhalogenated. 10.5 MFR.

Lexan 201R 7.0 MFR, for thicker sections without sinks. Improved flame retardance.

Lexan 203R 7.0 MFR, for thicker sections without sinks. Improved flame retardance.

Lexan 221R 17.5 MFR, for small, intricate parts.

Lexan 223R 17.5 MFR, for small, intricate parts.

Lexan 241R 10.5 MFR. Improved flame retardance.

Lexan 243R 10.5 MFR. UV-stabilized. Improved flame retardance.

Lexan EM1210 Automotive interiors. Excellent heat/impact resistance and outstanding

Lexan EM2212 Automotive interiors. 10% glass-reinforced.

Lexan EM3110 Automotive interiors. Optimizes flow/processability for cost effective thinner wall design uses.

Lexan EM3110R Automotive interiors. Optimizes flow/processability for cost effective thinner wall design uses.

Lexan HF1110 General purpose grade. Good clarity, heat resistance, property retention and dimensional stability.

Lexan HF1110R High flow grade. Easy mold release version of LEXAN HF1110.

Lexan HF1130 UV-stabilized. Good clarity, heat resistance, property retention and dimensional stability.

Lexan LI1813R Low-viscosity multi-purpose PC having low levels of ionics species.

Lexan LI1911R Low-viscosity multi-purpose PC having low levels of ionics species.

Lexan ML3729 PC, Mold Release, UV-Stabilizer, Heat Stabilized,

Lexan 3412HF 20% glass reinforced, high flow PC. UL rated V-1 at 0.059",

Lexan 3412R 20% GR, provides improved mechanical properties and UL94 V-1 rated at 0.058'.

Lexan 3413HF 30% glass reinforced, high flow PC.

Lexan 3413R 30% GR, provides improved mechanical properties and UL94V-1 rated at 0.058".

Lexan 3414R 40% GR, provides improved mechanical properties and UL94V-1 rated at 0.058".

Lexan 3433R 30% GR, provides improved mechanical properties. UV-stabilized. Internal mold release.

Lexan 500 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.

Lexan 500R 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.

Lexan 503 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.

Lexan 503R 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.

Lexan 4251R PPC+EXL, Mold Release, Heat Stabilized, High Impact, Opaque.

Lexan 4301 PPC+PC, Mold Release, Opaque,

Lexan 4401R PC/PPC Blend. Contains mold release.

Lexan 4501 High heat resistant polyphthlate carbonate, provides DTUL of 290F at 264 psi.

Lexan 4701R High heat resistant polyphthlate carbonate, provides DTUL of 300F at 264 psi.

Lexan 124 17.5 MFR, for small, intricate parts. FDA food contact compliant in limited colors.

Lexan 124R 17.5 MFR, for small, intricate parts. UL rated HB. 200 series recommended when V-2 rating required.

Lexan 144 10.5 MFR. FDA food contact compliant in limited colors.

Lexan 144R MFR 10.5. Internal mold release. FDA food contact compliant in limited colors.

Lexan 4504 High heat resistant PC copolymer, WITH DTUL OF 290F AT 264 psi.

Lexan 4704 High heat polycarbonate copolymer, with DTUL of 300F at 264 psi.

Lexan HF1140 Ideal for disposables/short life cycles.

Lexan HF1140R High flow grade. Heat stabilized. Enhanced level of mold release.

Lexan OQ4120R Optical grade with UV cut-off up to 400 nm, greater optical purity than standard grades.

Lexan OQ4320R Optical grade with UV cut-off up to 400 nm; greater optical purity than standard grades.

Lexan OQ4620R Optical grade with UV cut-off up to 400 nm, greater optical purity than standard grades.

Lexan OQ2720 Ophthalmic/safety lens market. OQ2xxx series in all transparent tints.

Lexan 3412ECR Lexan* 3412ECR Polycarbonate (PC) resin is a 20% glass fiber filled

Lexan 500ECR Lexan* 500ECR Polycarbonate (PC) resin is a 10% glass fiber filled, injection moldable grade.

Lexan 505R Polycarbonate (PC) resin is a 10% glass fiber filled

Lexan 915R Polycarbonate (PC) resin is a non-filled, injection moldable grade featuring non-chlorinated,

Lexan 925 Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 925A Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 925AU Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 925U Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 945 Polycarbonate (PC) resin is a non-filled, injection moldable grade.

Lexan 945A Polycarbonate (PC) resin is a non-filled, injection moldable grade.

Lexan 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated,

Lexan 945AU Polycarbonate (PC) resin is a non-filled, injection moldable grade.

Lexan 945U Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 955 Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 955A Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated

Lexan 955AU Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 955U Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan 9945A Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated

Lexan BFL2000 PC, Flame Retardant, Mold Release, Opaque

Lexan BFL2000U Polycarbonat (PC) resin is an injection moldable grade containing non-brominated

Lexan BFL2010 Non-Brominated, Non-Chlorinated Flame retardant PC.

Lexan BFL2015 Non-Brominated, Non-Chlorinated Flame retardant PC.

Lexan BFL4000U Lexan* BFL4000U Polycarbonate resin is an injection grade.

Lexan BPL1000 Polycarbonate (PC) resin is an injection moldable grade of non-chlorinated

Lexan LS1 Automotive lens applications. Low viscosity.

Lexan LS2 Automotive lens applications. Medium viscosity.

Lexan LS3 Automotive lens applications. Medium-high viscosity.

Lexan LSHF PC, Mold Release, UV-Stabilizer, Heat Stabilized, Transparent, UV-Stabilized,

我公司长期经营SABIC Cycoloy系列PC/ABS，可提供SGS、ROHS、UL黄卡、MSDS、FDA、COC、PDF物性表等各项数据，多年诚信为本，货源稳定、现货库存、质量保证、原厂原包、假一赔十、欢迎来电洽谈！

以上是SABIC Cycoloy系列PC/ABS的详细信息，，如果您对SABIC Cycoloy系列PC/ABS的信息有什么疑问，请与该公司进行进一步联系，获取SABIC Cycoloy系列PC/ABS的更多信息。