美国杜邦 Delrin® POM 500AF 赛钢料POM 物性表 UL黄卡

Delrin? POM 500AF 物性表 齿轮原料500AF加20%铁氟龙一手货源 提供UL黄卡原厂带拖 提供COA，一级代理价格 厂家价格，代理电话

一手货源 免费试料质量保证。

随便提供UL认证、FDA认证、材质、ISO、ASTM物性资料、ROHS(SGS)报告、物质安全资料表(MSDS)物性、报价、UL报告、RoSH标准、SGS检测报告等）...

美国杜邦POM 500AF 提供500AF UL黄卡介绍

• Component - Plastics		E41938
  E I DUPONT DE NEMOURS CO INC
  ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880-0713
  500AF, 100AF
  Acetal Polyoxymethylene/Polytetrafluoroethylene (POM/PTFE), "Delrin", furnished as pellets

  	Min Thk	Flame			RTI	RTI	RTI
  Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
  ALL	1.5	HB	4	0	105	85	90
  	3.0	HB	2	0	105	85	90

  Comparative Tracking Index (CTI):	0	Inclined Plane Tracking (IPT):	-
  Dielectric Strength (kV/mm):	-	Volume Resistivity (10xohm-cm):	-
  High-Voltage Arc Tracking Rate (HVTR):	0	High Volt, Low Current Arc Resis (D495):	4
  Dimensional Stability (%):	-

  NOTE -

  (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "ETPV" for ETPV or "SOR" for Sorona grades.

  ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

  Report Date:1977-08-30 Last Revised:2013-06-12

• 
  

  IEC and ISO Test Methods
  Test Name	Test Method	Units	Thk (mm)	Value
  Flammability	IEC 60695-11-10	Class (color)	1.5	HB75 (ALL)
  			3.0	HB40 (ALL)
  Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
  Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
  IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
  IEC Ball Pressure	IEC 60695-10-2	C	-	-
  ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
  ISO Tensile Strength	ISO 527-2	MPa	-	-
  ISO Flexural Strength	ISO 178	MPa	-	-
  ISO Tensile Impact	ISO 8256	kJ/m2	-	-
  ISO Izod Impact	ISO 180	kJ/m2	-	-
  ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

• 生产企业： 美国杜邦

①原料描述部分

规格级别	耐磨, 增强 其它 注塑	外观颜色
该料用途	齿轮、衬套、凸轮和其它耐磨擦的应用。
备注说明	加工特性：一般等级,添加20% TEFLON3纤维，表面润滑。 产品特性：与500相似的物理性能，但有超低的磨擦系数与高度耐磨耗率。



POM 500AF产品应用



POM塑胶原料产品实拍