高耐热性PSU 美国苏威UDEL P-3703

价格	￥153.00/公斤
起订量	≥25
所在地	广东东莞	可售量 10000公斤

联系人：邓女士

身份已验证

手机已验证

微信已验证

企业已验证

욑꜓욑꜓욑욑

ꆇ-꜓꜓꜓꜓꜓

手机扫码快速拨号

免费会员第6年

东莞市恒磊塑胶有限公司

联系人：邓女士 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：ꆇ-꜓꜓꜓꜓꜓

手机号码：욑꜓욑꜓욑욑

公司官网： http://hengleisj.51pla.com

所在地区：广东省东莞市

主营产品：塑胶原料,

扫一扫，加我微信

进入店铺

产品分类

最新产品

商品详情联系方式

进入手机版

基本参数

牌号	P-3703	厂商	苏威
品牌	UDEL	厂家(产地)	美国苏威
销售方式	品牌经销	加工级别	注塑级
类型	标准料	特性级别	高耐热性
用途级别	汽车/电子

PSU UDEL.png

Udel? P-3703 is a high-flow grade of polysulfone intended for injection molding applications with thin walls or long flow lengths. This grade has higher flow than Udel? P-1700 and a slightly greater tendency to stress crack in some aggressive environments.

Udel? polysulfone is a tough, rigid, high-strength thermoplastic that maintains its properties at temperatures from -101°C to 149°C (-150°F to 300°F). The heat deflection temperature at 1.8 MPa (264 psi) is 174°C (345°F). For most purposes, this resin is suitable for continuous use up to 149°C (300°F). The material is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel polysulfone is highly resistant to mineral acids, alkali and salt solutions. The resistance to detergents and hydrocarbon oils is good, but it will be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.

Electrical properties of Udel polysulfone are stable over a wide temperature range and after immersion in water or exposure to high humidity.
- Natural: Udel? P-3703 NT 11

Key Attributes: Acid Resistant; Alcohol Resistant; Alkali Resistant; Chemical Resistant; Food Contact Acceptable; Good Toughness; High Flow; High Heat Resistance; Hydrocarbon Resistant; Hydrolytically Stable

Applications: Appliance Components; Appliances; Automotive Electronics; Batteries; Business Equipment; Electrical Parts; Electrical/Electronic Applications; Food Service Applications; Industrial Parts; Microwave Cookware; Piping; Plumbing Parts; Valves/Valve Parts

Agency Ratings: ISO 10993; NSF STD-51

Information provided by Solvay Specialty Polymers.

PSU UDEL P-3703

Physical Properties	Metric	English	Comments
Density	1.24g/cc	0.0448lb/in3	ASTM D792
Water Absorption	0.30 % @Time 86400 sec	0.30 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.0070cm/cm	0.0070in/in	ASTM D255
Melt Flow	17g/10 min @Load 2.16 kg, Temperature 343 °C	17g/10 min @Load 4.76 lb, Temperature 649 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	70.3MPa	10200psi	ASTM D638
Elongation at Break	50 - 100 %	50 - 100 %	ASTM D638
Tensile Modulus	2.48GPa	360ksi	ASTM D638
Flexural Strength	106MPa	15400psi	ASTM D790
Flexural Modulus	2.69GPa	390ksi	ASTM D790
Izod Impact, Notched	0.690J/cm	1.29ft-lb/in	ASTM D256
Tensile Impact Strength	420kJ/m2	200ft-lb/in2	ASTM D182