进口不锈钢气体高温电磁阀德国雷普LIP

进口不锈钢气体高温电磁阀德国雷普LIP

德国雷普进口不锈钢气体高温电磁阀总代理：深圳派克阀门有限公司

Imported stainless steel gas high temperature solenoid valve Germany Lep LIP

Germany Relp import stainless steel gas high temperature solenoid valve distributor: Shenzhen Pike Valve Co., Ltd.

LIP中国总代理、产品选型、详细产品参数及电话：0755-81708778，传真：0755-81713669，手机：13827443669，在线QQ:307161059 -

德国雷普LIP进口不锈钢气体高温电磁阀德国雷普LIP是采用高压锻压阀体，活塞采用特殊材质，经过高精度设备加工阀门各部件，装配好后按工艺文件的程序进行经过反复测试，具有耐压稳定、线圈温升小、开关灵敏度高、使用寿命长的优点，已经在工业管道、高压测试台、化学、轻工、机械、科研工业窑炉的行业使用多年，是欧州阀门品牌。

LIP China distributor, product selection, detailed product parameters and telephone: 0755-81708778, Fax: 0755-81713669, Mobile: 13827443669, online QQ: 307161059 -

Germany Lep LIP imported stainless steel gas high temperature solenoid valve German Relp LIP is a high-pressure forging valve body, and the piston uses special materials. After high-precision equipment processing valve components, after assembly, according to the process of process documents, it has been tested. The pressure is stable, the coil is low, the switch is high, the advantages of long service life have been in industrial pipelines, high-pressure test stations, chemical, light industry, machinery, research industrial kiln, is a European valve brand.

--进口LIP气体高温电磁阀为不锈活塞式，活塞环用特殊耐温、耐磨材料制作；活塞与金属阀腔不产生直接摩擦，阀体安装方向无限制；特制线圈，并采用散热的结构方式，因此线圈不易烧毁，使用寿命长；长时间停止动作重新启动，动作同样灵敏。采用杠杆原理保证线圈和阀体彻底隔离、耐高温：采用金属硬密封，提高了使用温度，介质流体温度可达650℃、耐磨损：选材合理，阀杯和导向套间巧妙地利用流体的润滑作用，减少磨损。具有安装方便、体积小、高度自动化、智能化、多功能、高效率、低消耗、维护方便等产品特征，已经成为流体控制自动化的优先选择产品；已经在石化行业、电力行业、冶金行业、化工行业、消防、工业自动化设备和城市建设广泛应用。

- Imported LIP gas high temperature solenoid valve is a stainless piston type, the piston ring is used for special temperature resistance, wear-resistant materials; the piston does not produce direct friction, the valve body mounting direction is unlimited; the special coil, and the structure of heat dissipation Way, therefore the coil is not easy to burn, the service life is long; the operation is restarted for a long time, and the action is equally sensitive. The lever principle ensures that the coil and the valve body are thoroughly isolated, high temperature resistance: use metal hard seal, improve the temperature of the temperature, the medium fluid temperature can reach 650 ° C, wear resistant: reasonable material, the valve cup and the guide suite cleverly utilize fluid lubrication Role, reduce wear. With convenient installation, small size, high automation, intelligent, multi-function, high efficiency, low consumption, convenient maintenance, etc., has become a priority selection of fluid control automation; already in the petrochemical industry, electricity industry, metallurgy industry, chemical industry Industry, fire protection, industrial automation equipment and urban construction are widely used.

特征：1、低密度高填充性；2、耐老化性；3、耐腐蚀性；4、耐水蒸汽性能；5、耐过热水性能；6、电性能；7、弹性；8、粘接性。

进口超高温电磁阀技术参数：

控制方式：常开式、常闭式

动作方式：直动型，分步直动型,先导活塞型

标准电压：380,220,110,24VAC~220,110,24,12VDC

线圈工作温度：+50℃、+85℃

流通流体介质：水、气、油等高温流体 流通压力：0-1bar,10bar,16bar,25bar,40bar,64bar,100bar 流体温度：+100℃,+200℃,+300℃,+400℃,+500℃,+650℃

阀体材质：不锈钢（304、316、316L）、铸钢

连接方式：螺纹、法兰、焊接 泄漏量：零泄漏

进口LIP气体电磁阀选型方法：

管路中的流体必须和选用的电磁阀系列型号中标定的介质致。

流体的温度必须小于选用电磁阀的标定温度。

电磁阀允许液体粘度般在20CST以下，大于20CST应注明。

工作压差，管路压差在小于0.04MPa时应选用如ZS,2W,LIPDF,CM系列等直动式和分步直动式；

低工作压差大于0.04MPa时可选用先导式（压差式）电磁阀；工作压差应小于电磁阀的大标定压力；般电磁阀都是单向工作，因此要注意是否有反压差，如有安装止回阀。

Features: 1, low density high filling; 2, aging resistance; sex.

Import ultra high temperature solenoid valve technical parameters:

Control mode: normally open, normally closed

Action mode: direct type, step-by-step straight, first-lead piston type

Standard voltage: 380, 220, 110, 24VAC ~ 220, 110, 24, 12VDC

Coil operating temperature: + 50 ° C, + 85 ° C

Circulation fluid medium: water, gas, oil and other high temperature fluid flow pressure: 0-1bar, 10bar, 16bar, 25bar, 40bar, 64bar, 100BAR fluid temperature: + 100 ° C, + 200 ° C, + 300 ° C, + 400 ° C, + 500 ° C, + 650 ° C

Valve body material: stainless steel (304, 316, 316L), cast steel

Connection method: thread, flange, welding leakage: zero leak

Imported LIP gas solenoid valve selection method:

The fluid in the line must be caused by the medium bid in the selected solenoid valve series model.

The temperature of the fluid must be less than the calibration temperature of the selected solenoid valve.

The solenoid valve allows liquid viscosity below 20 cSt, greater than 20 c, should be indicated.

Differential pressure differences, the pipeline pressure difference should be used in direct and step-by-step straight-oriented straightforward, such as ZS, 2W, LIPDF, CM series;

The pilot (digestive) solenoid valve can be selected when the low operating pressure difference is greater than 0.04 MPa; the working pressure difference should be less than the large calibration pressure of the solenoid valve; the solenoid valve is unidirectional, so pay attention to whether there is a reaction pressure. If there is an installation check valve.

产地：德国

产品品牌：德国雷普（LIP）