进口低温减压阀德国雷普LIP不锈钢液氮LNG低温减压阀

进口低温减压阀德国雷普LIP不锈钢液氮LNG低温减压阀

Imported low temperature reduction valve German Relp LIP stainless steel liquid nitrogen LNG low temperature pressure reducing valve

总代理公司电话：0755-81708778 传真：0755-81713669 手机：13827443669

德国雷普LIP低温减压阀总代理：深圳派克阀门有限公司

General Agency Tel: 0755-81708778 Fax: 0755-81713669 Mobile: 13827443669

Germany Lep LIP low temperature reducer valve distributor: Shenzhen Pike Valve Co., Ltd.

进口低温减压阀德国雷普LIP不锈钢液氮LNG低温减压阀是在低温贮槽上用于将低温液氮的压力保持在某一规定范围内，也就是将液氮介质的阀前进口的高压力减到并稳定在阀后出口所需要的压力值的阀门。主要用于液氮、液氮、液氩介质系统上的减压阀(稳压》，具有调压稳定、密封可靠及耐压等优点。

Imported low-temperature reduction valve Germany Lep LIP stainless steel liquid nitrogen LNG low temperature pressure reducing valve is used in low temperature sumps to maintain the pressure of low temperature liquid nitrogen within a certain specified, that is, the valve of liquid nitrogen medium is imported. High pressure reduces the valve of the pressure value required to exit after the valve. Mainly used for liquid nitrogen, liquid nitrogen, and the pressure reduction valve (regulator "on a liquid argon medium system, has advantages such as pressure regulation, reliable and pressure resistance.

进口低温减压阀德国雷普LIP不锈钢液氮LNG低温减压阀规格：

Imported low temperature reduction valve Germany Lep LIP stainless steel liquid nitrogen LNG low temperature pressure reducer valve specifications:

公称通径 10-200（mm）

适用介质：液氧、液氮、液氩、液空、液化天然气、LO2、LN2、LAR、LNG等

设计压力 4.0Mpa

强度检验 6.0Mpa

调压范围为：0.1-0.8Mpa，0.2~1.0MPa，0.8~1.6MPa

适用温度 -196∽+80℃

适用领域：城建、化工、冶金、石油、制药、食品、饮料、环保

适用行业：空分设备、石油、天然气液化分离设备、化工尾气分离设备、液态氧、氮、氩、氢、二氧化碳低温贮槽及槽车，变压吸附制氧、氮及回收氢设备，乙烯高温裂解装置，电站等行业。

连接方式：焊接

安装位置：倒置安装，调节螺纹与地面保持垂直、水平方向

Nominal diameter 10-200 (mm)

Applicable medium: liquid oxygen, liquid nitrogen, liquid argon, liquid empty, liquefied natural gas, LO2, LN2, LAR, LNG, etc.

Design pressure 4.0MPa

Strength test 6.0MPa

The regulation range is: 0.1-0.8MPa, 0.2 ~ 1.0MPa, 0.8 ~ 1.6MPa

Applicable temperature -196 ∽ + 80 ° C

Applicable areas: urban construction, chemical, metallurgy, oil, pharmaceutical, food, beverage, environmental protection

Applicable industry: space-separating equipment, oil, natural gas liquefied separation equipment, chemical exhaust gas separation equipment, liquid oxygen, nitrogen, argon, hydrogen, carbon dioxide low temperature storage tank and tank car, transformer adsorption oxygen, nitrogen and recovery hydrogen equipment, ethylene high temperature Cracking devices, power stations and other industries.

Connection method: welding

Installation location: Invert the installation, adjust the thread and keep vertical, horizontal direction

进口低温减压阀德国雷普LIP不锈钢液氮LNG低温减压阀结构特点：

1、低温减压阀结构紧凑、体积小、重量轻。调节灵敏，稳定性好。

2、低温减压阀带可调装置，压力调节方便

3、低温减压阀阀门经低温深冷处理，可耐-196℃低温

4、低温减压阀垫片具有在常温下、低温状态及温度变化下能可靠密封性和复原性，密封性能好

Imported low-temperature reduction valve Germany Lep LIP stainless steel liquid nitrogen LNG low temperature pressure reducing valve structural features:

1, the low temperature pressure reducing valve is compact, small size, light weight. Adjustive sensitivity, good stability.

2, low temperature reducer valve with adjustable device, pressure regulation is convenient

3, the low temperature pressure reducing valve valve valve is treated with low temperature, can be resistant to -196 ° C low temperature

4, the low temperature reduced pressure valve gasket has energy-free, low temperature state and temperature change can be reliably sealed and rehabilitability, and the sealing performance is good.

进口LIP低温减压阀主要零件材料：

阀体：0Cr18Ni9(相当于ANSI S304）

上盖：0Cr18Ni9(相当于ANSI S304）

阀顶：0Cr18Ni9(相当于ANSI S304）

膜片：0Cr18Ni9(相当于ANSI S304）

弹簧：0Cr18Ni9(相当于ANSI S304）

密封圈：复合四氟乙烯

Import LIP low temperature pressure reducing valve Main parts material:

Valve body: 0Cr18Ni9 (equivalent to ANSI S304)

Conversion: 0Cr18Ni9 (equivalent to ANSI S304)

Valve top: 0Cr18Ni9 (equivalent to ANSI S304)

Diaphragm: 0Cr18Ni9 (equivalent to ANSI S304)

Spring: 0Cr18Ni9 (equivalent to ANSI S304)

Sealed ring: Composite Tufluoroethylene

安装位置：倒置安装，调节内螺纹与地面保持垂直、水平方向：

1、根据使用工况确定减压阀的类型和调压精度。

2、根据所需大输出流量选择合适的通径。

3、根据使用工况需要确定进口压力和出口压力。

4、根据使用介质是否有腐蚀性等确定阀体材质。

5、根据工况需求选择合适的连接方式。

主要产品有进口低温不锈钢减压阀，进口低温调压阀，进口低温泄压阀，进口低温不锈钢减压阀，进口低温焊接减压阀，进口低温法兰减压阀，进口低温压力调节阀，进口LNG低温减压阀，进口液氮减压阀，进口液氧减压阀，进口液氩减压阀，进口液化天然气减压阀，进口低温深冷减压阀等。

此产品使用业绩：壳牌浮式LNG生产设施、中海油宁波LNG接收站、 浙江LNG接收站项目、武汉市安山天然气液化储存基地项目、杨凌液化天然气(LNG)应急储备调峰项目、杭州市燃气(集团)有限公司、山西潞安高纯硅业一期2500t/a多晶硅项目

、哈尔滨工业大学低温试验箱项目、欧美投资集团（内蒙古）生物科技有限公司7.5万吨味精产品工程

产地：德国

产品品牌：德国雷普（LIP）