进口低温液氮过滤器德国雷普LIP超低温过滤器

进口低温液氮过滤器---进口低温液氮过滤器德国雷普LIP超低温过滤器

Imported low temperature liquid nitrogen filter --- imported low temperature liquid nitrogen filter German Relp LIP ultra-low temperature filter

LIP进口低温液氮过滤器德国雷普LIP超低温过滤器中国总代理、产品选型、详细产品参数及售后服务电话：0755-81708778，传真：0755-81713669，手机：13827443669，在线QQ:307161059 邮箱：13827443669@163.com，感谢您选用德国雷普LIP品牌低温过滤器，我们将为您提供更节能、优化的流体管道及设备的解决方案和产品服务.

德国雷普LIP阀门在全球场质量认可阀门品牌之一

产品概述：德国雷普LIP进口低温液氮过滤器德国雷普LIP超低温过滤器也适用于主要使用于制冷剂,液态二氧化碳,液氨,液氧,液氮,氟里昂等低温流体的管路上的预过滤，具有运行管理方便，过滤速度高，冲洗简单可靠等优点；

Product Overview: Germany Lep LIP imported low-temperature liquid nitrogen filter German Lep lip ultra-low temperature filter is also suitable for use in low-temperature fluids such as refrigerant, liquid carbon dioxide, liquid ammonia, liquid oxygen, liquid nitrogen, fluoridon, etc. Pre-filtered, has the advantages of convenient operation, high filtering speed, simple rinsing, and so on;

过滤器种类有很多,包括：篮式、手摇式、T型、Y型、U型、ZPG型等。过滤器通常安装于水力控制阀等设备的进口端，防止颗粒性杂质进入通道，造成堵塞，使阀门或其他设备失灵而不能正常使用，过滤器是水力控制阀及精密的易堵塞的机械产品所必须具备的过滤设备。

德国雷普LIP进口低温液氮过滤器德国雷普LIP超低温过滤器—德国雷普阀门系列:, 不锈钢过滤器,不锈钢Y型过滤器GL41/YS11,不锈钢拉杆伸缩过滤器YSTF,T型不锈钢过滤器SRT、SBT,不锈钢U型管道过滤器SRU,不锈钢篮式直通过滤器SRBA,不锈钢篮式高低型过滤器G07,不锈钢双桶过滤器,ZPG系列自动排污过滤器,不锈钢手摇刷式过滤器S型,法兰式不锈钢过滤器,丝口不锈钢过滤器YS11,不锈钢气体过滤器,不锈钢保温Y型过滤器BGL41,保温篮式过滤器,不锈钢磁性过滤器CXGL、GZTP不锈钢直通平板过滤器,ZT型平衡隔板式过滤器,不锈钢过滤器.阀门材质有： 不锈钢304、316、304L、316L等。工作压力1.6-25MPA(美标从150LB-600LB)。工作温度-200°C- 425°C。阀门口径从 DN10-DN600。连接方式:法兰、丝口或焊接。

There are many types of filters, including: basket, hand shake, T type, Y type, U-shaped, ZPG type, etc. The filter is typically mounted in the inlet end of the hydraulic control valve and other equipment, preventing particulate impurities from entering the passage, causing clogging, making the valve or other equipment failing without normal use, the filter is a hydraulic control valve and a precision easy blocking mechanical product The filtering device that must be available.

Germany Lep LIP imported low temperature liquid nitrogen filter Germany Ripp Lip ultra-low temperature filter - German Rew valve series: stainless steel filter, stainless steel Y-shaped filter GL41 / YS11, stainless steel tube telescopic filter YSTF, T-stainless steel filter SRT, SBT, stainless steel U-shaped pipe filter SRU, stainless steel basket straight through the filter SRBA, stainless steel basket type high and low filter G07, stainless steel double bucket filter, ZPG series automatic sewage filter, stainless steel hand shake filter S Type, flange-type stainless steel filter, silk stainless steel filter YS11, stainless steel gas filter, stainless steel insulation Y-shaped filter BGL41, insulation basket filter, stainless steel magnetic filter CXGL, GZTP stainless steel straight-through flat filter, ZT type Balance the diaphragm filter, stainless steel filter. Valve materials are: stainless steel 304, 316, 304L, 316L, etc. Working pressure 1.6-25MPa (US standard range from 150LB-600LB). Working temperature - 200 ° C- 425 ° C. Valve diameter from DN10-DN600. Connection method: flange, silk or welding.

进口低温液氮过滤器德国雷普LIP超低温过滤器规格范围：DN10-DN200

温度范围：-200℃≈150℃

阀体材质：深冷低温钢

阀杆材质：深冷低温钢

阀盖材质：深冷低温钢

阀座(瓣)材质：深冷低温钢

连接方式：法兰或焊接

进口低温液氮过滤器德国雷普LIP超低温过滤器适用范围：氨液及工业低温液体

Imported low temperature liquid nitrogen filters German Lep LIP ultra-low temperature filter specifications range: DN10-DN200

Temperature range: -200 ° C ≈ 150 ° C

Valve material: deep cold and warm steel

Valve stem: deep cold and warm steel

Valve cover material: deep cold and warm steel

Valve seat (flap) material: deep cold and warm steel

Connection: flange or welding

Imported low temperature liquid nitrogen filters German Rup Lip ultra-low temperature filter applicable range: ammonia and industrial low temperature liquid

◆ 维修与保养：1） 管道过滤器的核心部位是过滤芯件，过滤芯由滤框和不锈钢钢丝网组成，不锈钢钢丝网属宜损件，需特别保护；

2） 当工作一段时间后，过滤器滤芯内沉淀了一定的杂质，这时压力降增大，流速会下降，需及时清除滤芯内的杂质；

3） 清洗杂质时，特别注意过滤器过滤芯上的不锈钢钢丝网不能变形或损坏，否则，再装上去后，过滤后介质的纯度达不到设计要求，压缩机、泵、仪表等设备会遭到破坏；

4） 如发现不锈钢钢丝网变形或损坏，需马上更换。

产地：德国

产品品牌：德国雷普（LIP）

◆ Maintenance and maintenance: 1) The core part of the pipe filter is the filter core, the filter frame is composed of filter frames and stainless steel wire mesh, and the stainless steel wire mesia should be specially protected;

2) When working for a period of time, a certain impurity is precipitated, and the pressure drop is increased, and the flow rate will decrease, and the impurities in the filter element will be removed.

3) When cleaning impurities, pay special attention to the stainless steel wire mesh on the filter filter. Otherwise, after it is loaded, the purity of the medium after filtering is less than the design requirement, compressor, pump, instrument and other equipment. To destroy;

4) If the stainless steel wire mesh is discovered, it is necessary to replace it immediately.

Origin: Germany

Product Brand: Germany Lep (LIP)