耐化学性PCTG 美国伊士曼TRITAN MX711医疗应用

价格	￥32/公斤
起订量	≥25
所在地	广东东莞	可售量 10000公斤

联系人：何华华

身份已验证

手机已验证

微信已验证

企业已验证

율섩입핤핤율얁쒒얁

얁입쒒-푨푨얁섩푨푨얁푨얁

手机扫码快速拨号

速购通标准会员第5年

东莞市常平嘉美塑胶原料贸易行

联系人：何华华 QQ交谈 (联系时,请说明是在全球塑胶网上看到的)

联系电话：얁입쒒-푨푨얁섩푨푨얁푨얁

手机号码：율섩입핤핤율얁쒒얁

公司官网： http://13724551090.51pla.com

所在地区：广东省东莞市

主营产品： pa66, pc, abs,

扫一扫，加我微信

进入店铺

产品分类

PCTG TRITAN MX711

Notes:	Eastman Tritan Copolyester MX711 is an amorphous product with excellent appearance and clarity. Eastman Tritan MX711 contains a mold release derived from vegetable based sources. Eastman Tritan Copolyester MX711 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan MX711 has been formulated for medical devices. Eastman Tritan copolyester MX711 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization. Application/Uses Blood therapy IV components Key Attributes Ease of processing Excellent clarity Excellent hydrolytic stability Fast cycle times Fast drying times Good chemical resistance Good color stability upon ETO sterilization Good color stability upon gamma sterilization Good heat resistance Outstanding impact resistance Typical properties as listed are from preliminary data. Information was provided by Eastman.

Notes:

Eastman Tritan Copolyester MX711 is an amorphous product with excellent appearance and clarity. Eastman Tritan MX711 contains a mold release derived from vegetable based sources. Eastman Tritan Copolyester MX711 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan MX711 has been formulated for medical devices. Eastman Tritan copolyester MX711 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Application/Uses

Blood therapy
IV components

Key Attributes

Ease of processing
Excellent clarity
Excellent hydrolytic stability
Fast cycle times
Fast drying times
Good chemical resistance
Good color stability upon ETO sterilization
Good color stability upon gamma sterilization
Good heat resistance
Outstanding impact resistance

Typical properties as listed are from preliminary data. Information was provided by Eastman.

Physical Properties	Metric	English	Comments
Specific Gravity	1.18g/cc	1.18g/cc	ASTM D792
Linear Mold Shrinkage	0.0050-0.0070cm/cm	0.0050-0.0070in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	112	112	ASTM D785
Tensile Strength at Break	53.0MPa	7690psi	ASTM D638
Tensile Strength, Yield	43.0MPa	6240psi	ASTM D638
Elongation at Break	210 %	210 %	ASTM D638
Elongation at Yield	6.0 %	6.0 %	ASTM D638
Tensile Modulus	1.55GPa	225ksi	ASTM D638
Flexural Yield Strength	62.0MPa	8990psi	ASTM D790
Flexural Modulus	1.55GPa	225ksi	ASTM D790
Izod Impact, Notched	1.10J/cm @Temperature -40.0 °C	2.06ft-lb/in @Temperature -40.0 °F	ASTM D256
	9.80J/cm @Temperature 23.0 °C	18.4ft-lb/in @Temperature 73.4 °F	ASTM D256