Bonding Film 615/615S

Thermo-Bond Film 615，When you view products in our store we’ll keep track of them here for you.

Thermo-Bond Film 615，Flexible, light-colored, thermoplastic adhesive bonding film that exhibits good adhesion to a variety of substrates. The bonding film is removable from the release coated paper carrier. Available with 2.5 mil or 4.0 mil adhesive layer.

Thermo-Bond Film 615，Oops, no products have been added to this category yet.Equivalment To TThermo-Bond Film 615hermal Hot Melt Adhesive Bonding Film Tape For Metal Bonding，If you’re not seeing your recently viewed products keep in mind your browser or device settings could affect this.，

Equivalment ToThermo-Bond Film 615 Thermal Hot Melt Adhesive Bonding Film Tape For Metal Bonding

JSW-JSW Thermo-Bond Film 615bonding technology is a technology which is widely used, has unique functions, remarkable economic and social benefits, simple equipment, simple technology and strong practicability. JSW-JSW Thermo-Bond Film 615is an important part of bonding technology for metal, plastic, PMMA, acrylic, glass, etc. BecauseJSW Thermo-Bond Film 615material is mainly used to make all kinds of digital products, such as narrow frame and TP screen bonding, instruments and windows products with cutting-edge technology, their weatherability has to go through severe and harsh conditions for continuous work. Therefore,JSW Thermo-Bond Film 615bonding technology not only has a wide application field, but also has a simple technical content and a general process difficulty. It only requires a higher performance than adhesive. Higher.

The heat aging mechanism ofJSWBonding Film 615/615S : there are two changes when the adhesive meets heat: 1. Physical change, reversible reaction. The linear thermoplastic adhesive softens and melts, while the cross-linked thermosetting adhesive produces large deformation; 2. The chemical change ofJSW Thermo-Bond Film 615is irreversible reaction, mainly manifested in thermal decomposition and oxidative decomposition. This is the main reason for the thermal aging of adhesives. The main temperature parameters characterizing these changes are constancy temperature, thermal deformation temperature, melting point and decomposition temperature. When the heat ofJSWBonding Film 615/615S is over, the mechanical strength is significantly reduced; when the heat temperature reaches the peak, the adhesive is permanently damaged and cannot be used. The results show that the curing ofJSW Thermo-Bond Film 615by water is much more serious than that by heat decomposition. Because the water content is the chemical bond ofJSW Thermo-Bond Film 615, the product generated by curing reaction will be permanently discarded and should not be dissolved for use.

It is estimated that in 2015, the number ofJSW Thermo-Bond Film 615used in domestic digital manufacturing industry will reach more than 500000 pieces / month, a year-on-year increase of 5.4%; the daily average number of glue used in domestic digital manufacturing industry will be 6 million pieces / year, an increase of 3 million pieces / year over the previous year, a new record ofJSW Thermo-Bond Film 615used in electronic manufacturing industry. Fortunately, the production line of JSWcompany was redesigned and installed in April last year. The production capacity not only keeps up with the demand of glue consumption in the market, but also creates a strong market environment for future development. The growth rate of JSW615hot melt glue consumption in assembly plant is low. As far as the adhesive industry itself is concerned, affected by the low production of hand-held products in the previous year, the traditional adhesive industry will be severely damaged from January to April 2015. This also means that JSWcompany will have a good performance in January AprilJSW Thermo-Bond Film 615.

JSW has designed this versatile hot melt adhesive, JSW Bonding Film 615/615Shas become an effective solution for many applications, especially in electronics and plastics. In addition, this hot melt adhesive is very stable at high temperatures (300°F). Elastomers are fuel, oil and impact resistant, multi-purpose adhesives suitable for a variety of substrates, including some plastics,JSW Bonding Film 615/615Sopening times allow for fit adjustment and

positioning, low odor helps maintain a comfortable working environment, synthetic polymers of resin resin with lower particle weight, Makes adhesives or composites of high purity, so that they can be used in specific situations for cutting, encapsulation and repairing wood or drilling. It has been tested in the field ofJSW Bonding Film 615/615S electronic and electric applications that the r0 with hot super glue can speed up the work, but cannot be mixed. In addition, because of the idle slime built into the tight gun, less waste is produced. Synthetic polymer resin resin particle weight is low, can make the adhesive or synthetic purity is high, so it can be used in the specific situation JSW Bonding Film

615/615Sconditions for cutting, capsule and repair wood or drilling. In the field of electronic and electric applications has been tested r0 with hot super adhesive can speed up the work, but can not be mixed with less waste, because the adhesive with water is not enough, online catalogue hot JSW Bonding Film 615/615Smelt connection series, oil and plasticizer exposure is ideal for difficult to bond surfaces, Including fuel, oil and plasticizer exposed surface, has good heat resistance and high performance metal welding is the first choice, if you check all the details, please visit the website of Dongguan Taimao Electronic Materials Co., LTD.JSW Bonding Film 615/615S, has durability and strength impact resistance, suitable for difficult bonding surface, Including a surface with fuel, oil and plasticizer, suitable for difficult bonding surfaces, including a surface with fuel, oil and plasticizer.