PEI 沙伯基础(原GE) 2300

SABIC Ultem系列PEI简介

聚醚酰亚胺，Polyetherimide简称PEI，是琥珀色透明固体，不添加任何添加剂就有固有的阻燃性和低烟度，氧指数为47%，燃烧等级为UL94-V-0级，密度为1.28~1.42g/cm3。PEI具有很强的高温稳定性，即使是非增强型的PEI，仍具有很好的韧性和强度。因此利用PEI优越的热稳定性可用来制作高温耐热器件。具有优良的机械性能、电绝缘性能、耐辐照性能、耐高低温及耐磨性能，并可透过微波。PEI还有良好的阻燃性、抗化学反应以及电绝缘特性。玻璃化转化温度很高，达215℃。PEI还具有很低的收缩率及良好的等方向机械特性。加入玻璃纤维、碳纤维或其他填料可达到增强改性的目的；也可和其它工程塑料组成耐热高分子合金，可在-160～180℃的工作温度下长期使用。

美国保险商实验室规定聚醚亚胺树脂的长期使用温度是338T和356T（根据等级），燃烧等级达到UL94V—0（10密耳厚度。）氧指数达47，聚醚酰亚胺符合飞机内件要求的FAA阻燃性和热稀放性的材料标准。它的玻璃化转变温度为419F，并允许在392F下间断使用，在更高温度下，产生短期偏移。在356T下，拉伸温度和挠曲模量分别在41和2068MPa以上。用玻纤、碳纤维增强的材料在接近玻璃态转变温度下，具有更高的强度和刚度。

聚醚酰亚胺在高温和应力下的长期抗蠕变性允许其在许多结构设备中代替金属和其它材料。在可变温度、湿气和频率条件下表现出很好的电性能。在GHz频率下的低损耗因数使聚醚酰亚胺具有高的微波可穿性。它的离子型污染物低水准，在 250F100% R． H．和207kPa下120小时用水提取后的导电率，在20兆欧以上，它可用作电子传感器元件的绝缘材料。

聚醚酰亚胺是优良的涂层和成膜材料，能形成适用于电子工业的涂层和薄膜，并可用于制造孔径 0.1μm、具有高渗透性的微孔隔膜。还可用作耐高温胶粘剂和高强度纤维等。

PEI板属于非结晶性塑料。是一种无定形的高性能聚合物，是用无定形PEI（聚醚酰亚胺）所制造的工程塑料经过挤出机高温挤出而成

PEI主要特性

1、PEI中文名字（聚醚酰亚胺）是琥珀色透明固体,有良好的阻燃性和低烟度,燃烧等级为UL94-V-0级。

2、PEI具有很强的高温稳定性.耐高温,热变形温度达220℃,可在-160一180℃的工作温度下长期使用。

3、水解稳定性很好,耐高温,耐蒸汽；

4、聚醚酰亚胺具有很好的抗紫外线、Y射线性能。

PEI应用

取代金属制造光纤连接器,可使元件结构最佳化,简化其制造和装配步骤,保持更精确的尺寸。用于汽车领域,如用以制造高温连接件、产, 高功率车灯和指示灯、控制汽车舱室外部温度的传感器和控制空气和燃料混合物的传感器。还可用作耐高温润滑侵蚀的真空泵叶轮、在180℃操作的蒸馏器的磨口玻璃接头（承接口）、非照明的防雾灯的反射镜。

SABIC Ultem同系列型号介绍

Ultem HU1000 Transparent, standard flow Polyetherimide (Tg 217C).

Ultem HU1000E Transparent, standard flow Polyetherimide (Tg 217C).

Ultem HU1010 Transparent, enhanced flow Polyetherimide (Tg 217C).

Ultem HU1100 Standard flow Polyetherimide (Tg 217C).

Ultem HU1110 Enhanced Polyetherimide (Tg 217C).

Ultem HU2100 10% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem HU2110 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem HU2200 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem HU2210 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem HU2300 30% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem HU2310 30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem HU2400 40% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem HU2410 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 1000 Transparent, standard flow Polyetherimide (Tg 217C).

Ultem 1000E Transparent, standard flow Polyetherimide (Tg 217C) with internal mold release.

Ultem 1000EF Transparent, enhanced flow Polyetherimide (Tg 217C) with internal mold release.

Ultem 1000F Transparent, standard flow Polyetherimide (Tg 217C).

Ultem 1000M Standard flow Polyetherimide (Tg 217C) with internal mold release.

Ultem 1000P Standard flow Polyetherimide (Tg 217C) in 350 micron powder. ECO Conforming.

Ultem 1000R Standard flow Polyetherimide (Tg 217C) with internal mold release.

Ultem 1010 Transparent, enhanced flow Polyetherimide (Tg 217C).

Ultem 1010F Transparent, enhanced flow Polyetherimide (Tg 217C).

Ultem 1010K Transparent, high flow Polyetherimide (Tg 217C).

Ultem 1010M Enhanced flow Polyetherimide (Tg 217C) with internal mold release.

Ultem 1010P Enhanced flow Polyetherimide (Tg 217C) in 350 micron powder.

Ultem 1010R Enhanced flow Polyetherimide (Tg 217C) with internal mold release.

Ultem 1100 Standard flow Polyetherimide (Tg 217C).

Ultem 1100F Standard flow Polyetherimide (Tg 217C).

Ultem 1110 Enhanced flow Polyetherimide (Tg 217C).

Ultem 1110F Enhanced flow Polyetherimide (Tg 217C).

Ultem ATX100 Higher impact, high flow Polyetherimide blend.

Ultem ATX100R Higher impact, high flow Polyetherimide blend with internal mold release.

Ultem ATX200 High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing.

Ultem ATX200F High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing.

Ultem ATX200R High flow Polyetherimide blend with internal mold release.

Ultem 2100 10% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2100R 10% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2110 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2110EPR 10% Glass fiber filled, high flow Polyetherimide (Tg 217C).

Ultem 2110R 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2200 20% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2200F 20% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2200R 20% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2210 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2210EPR 20% Glass fiber filled, high flow Polyetherimide (Tg 217C).

Ultem 2210R 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2212EPR 20% Milled glass filled, high flow Polyetherimide (Tg 217C).

Ultem 2212R 20% Milled glass filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2300 30% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2300F 30% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2300R 30% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2310 30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2310EPR 30% Glass fiber filled, high flow Polyetherimide (Tg 217C).

Ultem 2310F 30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2310R 30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2312 30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2312EPR 30% Milled glass filled, high flow Polyetherimide (Tg 217C).

Ultem 2400 40% Glass fiber filled, standard flow Polyetherimide (Tg 217C).

Ultem 2410 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

Ultem 2410EPR 40% Glass fiber filled, high flow Polyetherimide (Tg 217C).

Ultem 2410R 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

我公司长期经营SABIC Ultem系列PEI，可提供SGS、ROHS、UL黄卡、MSDS、FDA、COC、PDF物性表等各项数据，多年诚信为本，货源稳定、现货库存、质量保证、原厂原包、假一赔十、欢迎来电洽谈！

以上是SABIC Ultem系列PEI的详细信息，由东莞市禹泓塑料有限公司提供，如果您对SABIC Ultem系列PEI的信息有什么疑问，请与我公司进行进一步联系，获取SABIC Ultem系列PEI的更多信息。