德国silicon图像采集卡mE5 marathon VCX-QP面阵相机Coaxpress S

microEnable 5 marathon VCX-QP是一款PCIe图像处理设备，可连接四个CoaXPress相机，带宽为25 Gbit/s

microEnable 5 marathon VCX-QP专门用于高速图像处理，可连接4台CoaXPress相机，并提供DMA1800 技术，获得机器视觉应用

• 支持CoaXPress相机输入
• 可轻松配置软件 > 高性能的图像处理功能
• 适用于工业领域的多设备、多相机支持
• DMA 1800 / 高达1800 MB/s的PCIe数据带宽(PCIe x4 Gen2)
• 支持通过前端I/O传输光电解耦(opto-decoupled)信号
• 广泛支持第三方软件接口
• 多样化的应用和行业用途
• 可利用支持Xilinx Kintex FPGA的VisualApplets来定制FPGA编程
• 可通过CoaXPress接口进行供电

文章详情

	型号名称	microEnable 5 marathon VCX-QP
	类别	图像采集卡

设备功能

	处理器	Vision Processor
	板载内存	2 GByte DDR3-RAM

相机接口

	标准	CoaXPress 1.0/1.1
	配置	CXP1-6; up to 4 cameras
	接头	4 x DIN 1.0/2.3
	功率输出	SafePower, Power over CXP 13W/24V per cable
	相机支持	line scan camera, area scan camera
	芯片类型	CFA sensor (Bayer), Grayscale sensor, RGB sensor
	位深	8-16-bit (grayscale), 24-48-bit (color)
	数据带宽	4 x 6,25 Gbit/s
	测试环境	Camera Simulator

主机PC接口

	PC总线接口	PCI Express x4 (Gen 2), DMA1800
	PC总线接口性能	up to 1.800 MB/s (sustainable)

控件和通用I/O

	板载GPIO接口	4 opto-coupled outputs (4,5V - 28V), 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422), Shaft encoder input, programmable rescaler, multiple-camera synchronization
	板载前端GPIO接口	2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input, optional (conf.): 4 opto-coupled Inputs (4,5V - 28V) with up to 1 MHz frequency, RS485 interface (PLC connection) scheduled, Shaft encoder input, programmable rescaler: multiple-camera synchronization, 2 TTL outputs, up to 20 MHz frequency
	GPIO同步和控制	Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization
	GPIO接口概述	8in/8out (max.), TTL or opto-coupled

处理功能

	基本功能	Offset/Gain/Gamma correction, Invert, ROI, White Balance, Mirroring, Image Selector, LUT

物理和环境信息

	尺寸	PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height
	重量（典型值）	168 g
	功耗/电源	typ. 1.175 A @ 12V (actual values depend on image pre-processing), maximum load: 3.35 A (single supply over 4-pin power connector)
	操作温度	50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C LFM = Linear Feet per Minute, unit for measuring airflow velocity
	存储温度	-50°C up to 80°C
	相对湿度（操作、存储）	5% - 90% non-condensing (operating), 0% - 95% (storage)
	MTBF	pending
	合规	WEEE, RoHS, REACH

软件

	软件驱动程序	Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit)
	软件工具	microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Service tool), Device Drivers, SDK, Documentation
	软件API	Silicon Software SDK, .net interface
	FPGA编程	VisualApplets
	BV-软件兼容性	Halcon, Common Vision Blox, Cognex