路博润ESTANE ETE 55DT3 高硬度挤出级TPU

价格	￥0.00/吨
起订量	≥1
所在地	广东深圳	可售量 10000吨

联系人：李军

企业已验证

쉗꘱꘱ꔤꔤ

手机扫码快速拨号

免费会员第1年

深圳市骏塑科技有限公司

联系人：李军 (联系时,请说明是在全球塑胶网上看到的)

联系电话：

手机号码：쉗꘱꘱ꔤꔤ

公司官网： http://mx52yzx2.51pla.com

所在地区：广东省深圳市

主营产品：热塑性聚氨酯TPU, 美国路博润, 德国巴斯夫, 德国科思创,

进入店铺

产品分类

最新产品

商品详情联系方式

进入手机版

基本参数

牌号	1185A	厂商	lubrizol
品牌	美国Lubrizol	厂家(产地)	路博润
销售方式	品牌经销	CAS	TPU
密度	1.2g/cm3	断裂伸长率	500.0
类型	标准料	规格级别	挤出

路博润ESTANE ETE 55DT3 高硬度挤出级TPU

Type: Estane? ETE 55DT3 is a 55D aromatic Polyether-Based Thermoplastic Polyurethane (TPU). Features: Hard TPU with wide extrusion processing window and melt stability, low temperature flexibility, high transparency, UV stable. Uses: Extrusion: Hose and Tube, Extrusion: Profile, Cable Jacket; Injection molding: Various. ? Prior to testing samples were conditioned at 23°C for 48 hours. ? Based on extruded sheet (30 mils). ? Listed values are “typical (average) values” and should / can not be applied for specification purposes. Supply Form and Standard Packaging ? Estane? ETE 55DT3 TPU is supplied in pellet form and packaged in 50 lb bags or 1000 lb boxes. Material Preparation ? Prior to processing, Estane? ETE 55DT3 TPU must be dried at 220°F (104°C) for 2-4 hours. ? It is recommended to dry the material in a desiccant type dryer. Target dew point should -40°C. ? Depending on the applied processing technique, the maximum moisture level should be 0.02%. Processing Conditions ? Estane? ETE 55DT3 TPU was extruded on any conventional extruder. Physical Properties Value (Metric Units) Unit Test Method Hardness (5 sec) 55 +/- 3 Shore D ASTM D-2240 Specific Gravity 1.16 ASTM D-792 Tensile Strength 8400 (57.9) psi (MPa) ASTM D-412 Ultimate Elongation 420 % “ Tensile Stress at: - 100 % Elongation 2800 (19.3) psi (MPa) ASTM D-412 - 300 % Elongation 6100 (42.1) psi (MPa) “ Tear Strength Graves 810 (142.0) lb/in (kg/mm) ASTM D-624 (die C) Trouser 230 (40.3) lb/in (kg/mm) ASTM D-470 Taber Loss (1000 rev) 0.00384 (109) oz (mg) ASTM D-3389 (H18, 1000g

联系方式

深圳市骏塑科技有限公司