ISPLEN PB-110 H2E PP

ISPLEN PB-110 H2E PP

ISPLEN® PB-110 H2E is a block ethylene-propylene copolymer with a high molecular weight. Due to averagely good flow properties and very high mechanical properties is a suitable grade to be processed into pipes. Its very high impact strength, even at low temperatures, and stress cracking also can use in critical conditions. Other applications are corrugated pipes for sewage, due to its high modulus

ADDITIVATION
ISPLEN® PB-110 H2E contains stabilizers and additives according to the end-use of the item in order to reinforce the thermal stability and increase the hot-water extraction resistance. The processor may include other additives. Formulation allows polymer stability during the normal conditions of processing and use.

COLOURING
ISPLEN grades are supplied in natural colour but it can be easily coloured with pigments steady at processing temperatures, using dry-colouring or masterbatch techniques.

FOODSTUFF REGULATIONS
ISPLEN® PB-110 H2E is approved for food contact under certain legislation. For more information about specific country regulation, please, contact with our Technical Service.

ISPLEN® PB110H2E is a very low melt flow propylene heterophasic copolymer with a reinforced formulation for extrusion process, and a high thermal stabilisation. Its crystalline structure gives a high rigidity and very high tensile strength resistance. Its flow characteristics and mechanical properties make it specially adapted for high thickness and good glossy surface films or sheets.
It can be easily coloured during the extrusion process using the right pigments, especially in the form of masterbatches with a higher melt flow rate than that of the base polymer.

APPLICATIONS
In extrusion process requiring high melt viscosity strength and particularly high tensile properties, such as:

Sheets and ProfilesBlow-moldingGlossy surface sheets.Pipes.

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

 

General
Material Status	Commercial: Active
Availability	EuropeNorth America
Additive	Heat Stabilizer
Features	Block CopolymerFood Contact AcceptableGood Chemical Resistance Good ColorabilityGood FlowHeat StabilizedHigh ESCR (Stress Crack Resist.) High Molecular WeightHigh RigidityHigh Tensile Strength Low Temperature Impact ResistanceUltra High Impact Resistance
Uses	Blow Molding ApplicationsCorrugated PipeFilmPipingProfilesSheet
Agency Ratings
Appearance	Colors AvailableNatural Color
Forms	Pellets
Processing Method	Blow MoldingExtrusionPipe ExtrusionProfile Extrusion Sheet Extrusion

ISPLEN PB-110 H2E PP 及其它型号：

 ISPLEN PB 130 G1F REPSOL YPF PP Impact Copolymer
 ISPLEN PB 130 G1M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 140 G2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 141 G2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 141 N2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 141 U5M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 150 G1F REPSOL YPF PP Impact Copolymer
 ISPLEN PB 150 G2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 154 M1F REPSOL YPF PP Impact Copolymer
 ISPLEN PB 170 G1F REPSOL YPF PP Impact Copolymer
 ISPLEN PB 170 G2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 171 H REPSOL YPF PP Impact Copolymer
 ISPLEN PB 171 H1M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 176 N4M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 180 A4M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 180 G2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 181 N2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 182 G2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 186 N4M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 190 K2M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 195 K3M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 199 A3M REPSOL YPF PP Impact Copolymer
 ISPLEN PB 300 A3M REPSOL YPF PP Impact Copolymer
 ISPLEN PB-110 H2E REPSOL YPF PP Copolymer
 ISPLEN PB-131 N5E REPSOL YPF PP Impact Copolymer

 

 

 

聚丙烯（PP）的特性和应用

聚丙烯特性：

1. 物理性能：聚丙烯为无毒，无臭，无味的乳白色高结晶的聚合物。

2. 化学稳定性好。

3. 热性能良好。

4. 力学性能优良

5. 电性能优良

6. 耐候性

聚丙烯用途：

1. 薄膜制品：聚丙烯薄膜制品透明而有光泽，对水蒸气和空气渗透性小，它分为吹膜薄膜，流延薄膜（CPP），双向拉伸薄膜

2. 注塑制品：可用于汽车，电气，机械，仪表，无线电，纺织，国防等工程制品，日用品，周转箱，医疗卫生器材，建筑材料

3. 挤塑制品：可做管材，型材，单丝，渔用绳索，打包带，捆扎绳，编织袋，纤维，符合涂层，片材，吹塑中空成型制品各种小型容器等。

其它：低发泡，钙塑板，合成木材，层压板，高发泡可作结构泡沫体。

 

 

ISPLEN PB-110 H2E PP 价格优惠，质量保证。

ISPLEN PB-110 H2E PP 原材料产地证明 SGS,MSDS.UL黄卡

ISPLEN PB-110 H2E PP 东莞市艾博（国际）塑胶进口出口有限公司现货供应 PP 全系列产品可随货提供原材料物性，原材料产地证明SGS.MSDS.UL黄卡等相关详细资料，可开具17%增值税发票.公司秉着“以诚为本，以信为用”的经营理念。与客户是建立在互惠、互利、互信的基础上长期合作。共创双赢局面，愿与各界人士真诚合作，共同发展，携手共创辉煌的明天.

欢迎来人来电咨询洽谈：

直线：0769-88038808

传真：0769-88768175

邓小姐：13728215822

E-mail:abba2010@163.com

网址：www.abplas.com.cn