TPE合金/Prime Tuff-X STF/Primex Plastics Corporation 物性表
TPE合金/Prime Tuff-X STF/Primex Plastics Corporation
规格用途
| 该料用途 | 船舶应用; 农业应用; 泡沫; 汽车内部零件; 汽车仪表板 |
| 备注说明 | This product consists of a Thermoplastic elastomer skin laminated to closed-cell, cross-linked polyolefin foam that is then laminated to our Tuff-X rigid substrate. Low gloss and soft feel eliminate the need for soft-touch paint. (<5% after forming) It also helps eliminate the squeak and rattle that is characteristic of Styrenics. Recycling of unpainted scrap is possible with no loss of properties.Applications:Tuff-X STF is ideal for interior and exterior components, including center consoles, instrument panels, door panels, and many others. This addresses the customers' desire for a low-gloss, soft feel material to soften interior and exterior applications in markets such as agricultural equipment, marine, heavy trucks, RV cabs, and others, while utilizing a thermoplastic, recyclable material.Processing:Prime Tuff-X STF can be formed using standard forming equipment. The foam/skin side should not be formed against the tool. Radiant heat works best, Zone controlled ceramic or quartz heaters are preferred. The run out or flange area should be greater than what is figured for ABS or HIPS. The substrate should reach normal forming temperature but the foam should not exceed 310°F.Finishing:Tuff-X STF can be fabricated by using steel rule or hard dies, heated knives or tooling will also work, however, routing and sawing is not recommended. Mechanical screws and fasteners, as well as some adhesives that have been developed by 3M, may be used for bonding.Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process.Colors, Textures and Capabilities:Primex typically offers a Naples and Leather texture and four colors consisting of light and dark, tan and gray. Custom color matching is available but order sizes must be approved. |
技术参数
| 性能项目 | 测试条件 | 测试方法 | 数值/描述 | 单位 | |
| 物理性能 | 密度 | ISO 1183 | ꜕.솇 | g/cm³ | 收缩率 | ISO 294-4 | ꜕.꜕ 到 ꜕.꜕ | % |
| 硬度 | 肖氏硬度 | ISO 868 | 邵氏 A | 윤윤 | |
| 机械性能 | 拉伸应力 | ISO 527-2 | 屈服 | 퐱.옣 | MPa | 弯曲模量 | ISO 178 | 퐱꜕꜕ | MPa |
| 冲击性能 | 装有测量仪表的落镖冲击 | ASTM D3763 | -15°C, Total Energy 3 | 솇.꜕ | J | 23°C, Total Energy | 롇퐱.꜕ | J |
| 热性能 | 热变形温度 4 | 0.45 MPa, 未退火 | ISO 75-2/B | | °C | 1.8 MPa, 未退火 | ISO 75-2/A | ꜕.꜕ | °C | 线形热膨胀系数 - 流动 | 롇.꜕퐘-롇 | cm/cm/°C |
温馨提示：此数据表中的信息由塑胶网从该材料的生产商处获得，塑胶网尽最大努力确保此数据的准确性，但是塑胶网对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
