PA66 塑胶原料 RX12402

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RB004 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RB006 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RB008 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RB00A compound SABIC Innovative Plastics Europe 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC003 compound SABIC Innovative Plastics Europe 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC003SXS compound SABIC Innovative Plastics Europe 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC004SXC compoundSABIC Innovative Plastics Europe 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC006 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC006H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC006XXH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC008 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC008ESS compound SABIC Innovative Plastics Europe 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC008H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RC00A compound SABIC Innovative Plastics Europe 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF002 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0029S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF002ES compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF002SXS compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF002XXH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0039S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF003AXH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF003ES compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF003H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF003XXH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF004 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00469S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0049S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0049SP compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF004H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF004XXD compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF004XXH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF005 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF005SXS compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0069S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0069SF compound SABIC Innovative Plastics Asia Pacific 尼

龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0069SZ compound SABIC Innovative Plastics Asia Pacific 尼

龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0069XZ compound SABIC Innovative Plastics Asia Pacific 尼

龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006ESZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006EUC compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006EXZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006L compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006LXP compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006SXZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006XXH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006XXY compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF006XXZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF0079SZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF007ES compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF007H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF007SXN compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF007SXP compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF007SXQ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF007SXR compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF008 compound SABIC Innovative Plastics Asia Pacific 尼龙

66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF008ESY compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF008ESZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF008H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF008S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF008XXH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF008XXZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF009H compound S塑胶原料 Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF009S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00AH compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00AS compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00ASXZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00BS compound SABIC Innovative Plastics Asia Pacific 尼龙

66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00C compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00CSXS compound SABIC Innovative Plastics Asia Pacific 尼

龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RF00CSXZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RFB53XXZ compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RFB66 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RFB71S compound SABIC Innovative Plastics Europe 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RFZ22S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RFZ349XC compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RW004 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX00713H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX02743 compound SABIC Innovative Plastics Asia Pacific 尼

龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX04515H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX05491 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX05494 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX06420 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX06421S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX10405H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX10408H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX12402 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX96592 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX98372H compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RX99732C compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RZ006 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RZ0069 compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RZ006S compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 RZ006SXP compound SABIC Innovative Plastics 尼龙66

LNP THERMOCOMP 美国液氮 PA66 塑胶原料 VF008A compound SABIC Innovative Plastics 尼龙66

*******************************************************************************************************

Blow Moldable Resins吹塑成形树脂
________________________________________
Zytel? BM70G15HSLR BK537 
 15% Glass fiber reinforced polyamide 66 for blow molding吹塑的15%玻璃纤维被加强的PA66

Zytel? BM70G20HSLX BK537 
 20% Glass fiber reinforced polyamide 66 for blow molding吹塑的20%玻璃纤维被加强的PA66 

Zytel? BM7300THS BK317 
 Unreinforced, PA6 blow molding resin 未加强， PA6吹塑树脂

Zytel? CFE8005HS BK010 
 Blow moldable, Super Tough nylon 66 resin 吹适于模压，超级坚韧尼龙66树脂

Zytel? FE240012 BK010 
 Highly toughened, heat stabilized polyamide 612 for extrusion, blow molding or processing by other techniques requiring high melt viscosity. 高度挤压的变坚韧的，热被稳定的多醯胺612，吹塑或者处理用要求高融解黏度的其他技术。


Color Stable Resins颜色稳定树脂

________________________________________
Zytel? ST801A NC010A 
 Super Tough, high performance, polyamide 66 resin. It is partially UV stabilized and when appropriately colored offers limited protection to indirect sunlight exposure. 超级强韧，高性能，聚酰胺66树脂。这是部分紫外线稳定和适当的颜色时，提供有限的保护，以间接的阳光照射。
 


Encapsulation Resins封闭树脂
________________________________________
Zytel? FE5382 BK276 
 33% Glass fiber reinforced, heat stabilized, black polyamide 612 resin developed for electrical bobbins and encapsulation applications被加强的33%玻璃纤维，被稳定的热，黑PA612树脂为电子片盘和封闭应用开发了


Extrusion Resins挤压树脂
________________________________________
Zytel? 101 NC010 
 General purpose polyamide 66 resin for injection molding and extrusion 注坯模型和挤压的通用PA66树脂

Zytel? 153HSL NC010 
 Lubricated, heat stabilized, extrusion grade 润滑，被稳定的热，挤压等级

Zytel? 157HSL BK010 
 Lubricated, heat stabilized, improved weather resistant molding/extrusion grade 润滑，热稳定了，改善的天气抗性造型或挤压等级

Zytel? 158 NC010 
 General purpose PA 612 resin suitable for molding and extrusion applications 通用剂612树脂适合成型和挤出应用


Zytel? 158L NC010 
 Lubricated, general purpose molding/extrusion grade -- a higher melt viscosity than Zytel? 151L NC010润滑，通用成型/挤出级-高熔体粘度比Zytel ? 151L NC010


Zytel? 159 NC010 
 High viscosity, extrusion grade 高黏性，挤压等级

Zytel? 159L NC010 
 Lubricated, extrusion grade 润滑，挤压等级

Zytel? 42A NC010 
 High viscosity polyamide 66 resin for injection molding and extrusion applications such as film and tubing 注坯模型和挤压应用的高黏性PA66树脂例如影片和管材

Zytel? 45HSB NC010 
 High viscosity, heat stabilized polyamide 66 resin for injection molding and extrusion applications such as film and tubing 高黏性，加热注坯模型和挤压应用的被稳定的PA66树脂例如影片和管材

Zytel? 7301 NC010 
 General purpose, unlubricated polyamide 6 resin for extrusion applications. 一般用途，挤压应用的未润滑的PA6树脂。

Zytel? 7304 NC010 
 Medium viscosity, unlubricated polyamide 6 resin for extrusion applications. 一般用途，挤压应用的未润滑的PA6树脂。

Zytel? E51HSB NC010 
 High molecular weight, heat stabilized polyamide 66 resin for injection molding and extrusion 高分子重，热稳定了注坯模型和挤压的PA66树脂

Zytel? FE2400 NC010 
 High viscosity polyamide 66/6 copolymer resin高黏性PA66/6共聚物树脂 

Zytel? FE240012 BK010 
 Highly toughened, heat stabilized polyamide 612 for extrusion, blow molding or processing by other techniques requiring high melt viscosity. 高度挤压的变坚韧的，热被稳定的PA612，吹塑或者处理用要求高融解黏度的其他技术。

Zytel? FE3071 NC010 
 Intermediate viscosity polyamde 66 resin for injection molding and extrusion 注坯模型和挤压的中间黏度polyamde 66树脂

Zytel? FE310001 NC010 
 High viscosity polyamide 612 resin that is suitable for extrusion applications, such as monofilaments and tubing 适用于挤压应用，例如单丝和管材的高黏性PA612树脂

Zytel? FE310064 NC010 
 A polyamide 610 resin PA610树脂

Zytel? FE310065 NC010 
 A polyamide 610 resin PA610树脂

Zytel? FE4200 BK136 
 Toughened, heat stabilized Nylon 66 resin for extrusion 变坚韧，热挤压的被稳定的尼龙66树脂

Zytel? FN727 NC010 
 Graft ionomer modfied nylon 6 resin. Flexible, nonplasticized. 接枝离子modfied尼龙6树脂。灵活， nonplasticized 

Zytel? ST811HS NC010 
 Rubber modified nylon 6 resin. Very flexible. 橡胶修改过的尼龙6树脂


Flame Retardant Resins阻燃树脂
________________________________________
Zytel? FR50 BK505 
 25% Glass reinforced, flame retardant black PA66被加强的25%玻璃，阻燃黑色PA66

Zytel? FR50 NC010A 
 25% Glass reinforced, flame retardant PA66被加强的25%玻璃，阻燃PA66

Zytel? FR7025V0F NC010 
 Unreinforced, elemental phosphorous and halogen free 无加强，元素磷和无卤


Zytel? FR7026V0F NC010 
 Unreinforced, elemental phosphorous and halogen free flame retardant PA66无加强，元素磷和无卤阻燃尼龙66


Zytel? FR70M30V0 BK010 
 30% Mineral reinforced, flame retardant, black polyamide 66 resin for injection molding被加强的30%矿物，注坯模型的阻燃，黑PA66树脂

Zytel? FR70M30V0 NC010 
 30% Mineral reinforced, flame retardant polyamide 66 resin for injection molding被加强的30%矿物，注坯模型造型的阻燃多醯胺66树脂 


Glass/Mineral Reinforced Resins玻璃或矿物被加强的树脂
________________________________________
Zytel? 70GB30HSL NC010 
 30% Glass bead reinforced, heat stabilized PA66 resin for injection molding被加强的30%玻璃珠，热注坯模型的被稳定的PA66树脂


Low Warp Resins低翘曲树脂

________________________________________
Zytel? 70GB30HSL NC010 
 30% Glass bead reinforced, heat stabilized PA66 resin for injection molding被加强的30%玻璃珠，热注坯模型的被稳定的PA66树脂

Zytel? FR70M30V0 BK010 
 30% Mineral reinforced, flame retardant, black polyamide 66 resin for injection molding 30 ％的矿物增强，阻燃，黑色的聚酰胺66树脂注塑成型


Zytel? FR70M30V0 NC010 
 30% Mineral reinforced, flame retardant polyamide 66 resin for injection molding 30 ％的矿物增强，阻燃聚酰胺66树脂注塑成型


Low Wear and Friction Resins低摩擦磨损树脂

________________________________________
Zytel? 70G33GRA BK350 
 33% Glass fiber reinforced 33 ％玻璃纤维增强


Zytel? 70K20HSL NC010 
 Aramid-modified, heat stabilized, lubricated PA66 resin with excellent wear resistance. 热稳定，润滑尼龙66树脂具有良好的耐磨性。

Zytel? WRF101A NC010 
 Unreinforced lubricated PA 66 resin无加强润滑物66树脂


Zytel? WRF403 NC010 
 30% Glass reinforced, heat stabilized PA66 resin containing Teflon? PTFE micropowder 30 ％玻璃纤维增强，热稳定的尼龙66树脂含有特氟隆?聚四氟乙烯微粉


Zytel? WRF500 NC010 
 Heat stabilized PA66 resin modified with Teflon? PTFE micropowder and Kevlar?.热稳定尼龙66树脂改性特氟龙?聚四氟乙烯微粉和凯夫拉尔? 


Mineral Reinforced Resins矿物增强树脂

________________________________________
Zytel? FR70M30V0 BK010 
 30% Mineral reinforced, flame retardant, black polyamide 66 resin for injection molding 30 ％的矿物增强，阻燃，黑色的聚酰胺66树脂注塑成型


Zytel? FR70M30V0 NC010 
 30% Mineral reinforced, flame retardant polyamide 66 resin for injection molding 30 ％的矿物增强，阻燃聚酰胺66树脂注塑成型


Toughened Resins增韧树脂

________________________________________
Zytel? 444AHS BK152 
 Toughened, heat stabilized, black polyamide 66 resin for injection molding. It is a high flow, processing friendly material增韧，热稳定，黑色尼龙66树脂注塑。这是一个高流量，加工好
 

Zytel? 73G30T BK261 
 30% Glass fiber reinforced, toughened black polyamide 6 resin for injection molding 30 ％的玻璃纤维增强，增韧黑色尼龙6树脂注塑成型


Zytel? 73G30T NC010 
 30% Glass fiber reinforced, toughened polyamide 6 resin for injection molding 30 ％的玻璃纤维增强，增韧尼龙6树脂注塑成型


Zytel? 75CG30HSL BK409 
 Polyamide resin modified with carbon fiber for improved structural performance. 聚酰胺树脂改性碳纤维结构性能的改善

Zytel? 75CG45HSL BK409 
 45% Glass and carbon fiber reinforced, toughened polyamide resin 45 ％的玻璃和碳纤维增强，增韧聚酰胺树脂


Zytel? 8018HS BKB085 
 14% Glass reinforced toughened heat stabilized black nylon 66 resin 14 ％玻璃纤维增强增韧热稳定黑色尼龙66树脂


Zytel? 8018HS NC010 
 14% Glass reinforced toughened heat stabilized nylon 66 resin14 ％玻璃纤维增强热稳定增韧尼龙66树脂
 

Zytel? 80G14A NC010A 
 14% Glass fiber reinforced, toughened, high flow polyamide 66 resin. It offers outstanding performance in injection molding applications. 14 ％玻璃纤维增强，增韧，高流动聚酰胺66树脂。它提供了出色的表现注塑应用。


Zytel? 80G14AHS BK099 
 14% Glass fiber reinforced, toughened, high flow, heat stabilized, black polyamide 66 resin. It offers outstanding performance in injection molding applications. 14 ％玻璃纤维增强，增韧，高流量，热稳定，黑色尼龙66树脂。它提供了出色的表现注塑应用。 。


Zytel? 80G14AHS NC010 
 14% Glass fiber reinforced, toughened, high flow, heat stabilized polyamide 66 resin. It offers outstanding performance in injection molding applications. 14 ％玻璃纤维增强，增韧，高流量，热稳定聚酰胺66树脂。它提供了出色的表现注塑应用。


Zytel? 80G25HS BK117 
 25% Glass fiber reinforced, toughened, heat stabilized, black polyamide 66 resin for injection molding25 ％玻璃纤维增强，增韧，热稳定，黑色尼龙66树脂注塑成型
 

Zytel? 80G33HS1L BK104 
 33% Glass fiber reinforced, heat stabilized black polyamide 66 resin with outstanding impact resistance developed using DuPont? Super Tough technology 33 ％玻璃纤维增强，热稳定黑色聚酰胺66树脂出色的抗冲击性开发利用杜邦?超级强韧技术


Zytel? 80G33HS1L NC010 
 33% Glass fiber reinforced heat stabilized polyamide 66 resin with outstanding impact resistance developed using DuPont? Super Tough technology33 ％玻璃纤维增强热稳定聚酰胺66树脂出色的抗冲击性开发利用杜邦?超级强韧技术
 

Zytel? 80G33L NC010 
 33% Glass fiber reinforced polyamide 66 resin with outstanding impact resistance developed using DuPont? Super Tough technology 33 ％玻璃纤维增强的聚酰胺66树脂出色的抗冲击性开发利用杜邦?超级强韧技术


Zytel? 80G43HS1L BK104 
 43% Glass fiber reinforced, heat stabilized, black polyamide 66 resin with superior impact resistance43 ％玻璃纤维增强，热稳定，黑色尼龙66树脂具有优异的抗冲击性
 
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

我公司长期现货供应塑胶原料:聚酰胺PA66尼龙料,防火阻燃级PA66，玻纤增强PA66，防静电PA66、导电PA66、矿物增强PA66、无卤阻燃PA66,耐磨损PA66、抗紫外线耐候级PA66、高刚性尺寸稳定PA66,耐高温高耐热PA66，热稳定级PA66,增韧级PA66,高抗冲击PA66，高润滑PA66,耐寒耐低温PA66，挤出级PA66，FDA食品级PA66，铁氟龙增强PA66，芳纶增强PA66，碳纤增强PA66,医用级PA66。耐寒PA66 PA66耐低温-40度,低温韧性