【切换城市】
7×24小时咨询热线：400-668-0255 我的塑胶网 会员商务室 帮助中心
苏州寅旭塑化有限公司
苏州寅旭塑化有限公司
  • 入驻年限：7年
  • 所 在 地：江苏省 苏州市
  • 主营产品： 塑胶原料及产品 化工原料及产品
进入店铺 我要询盘
vip

进入移动商铺

免费会员第 7 年 vip
苏州寅旭塑化有限公司
主营产品： 塑胶原料及产品, 化工原料及产品,
如实描述 用心服务 品质保障
ꉧ솆ꉧꉧ뉳덱ꉧꙓꙓ
当前位置： 首页 > 产品大全 > PA66 > PA66 > 供应 杜邦BM70G20HSLX

供应 杜邦BM70G20HSLX

价格 ￥25.00/ KG
起订量 ≥25
所在地 江苏 苏州 可售量 10000 KG
联系人： 邓 先生
身份已验证
手机已验证
微信已验证

ꉧ솆ꉧꉧ뉳덱ꉧꙓꙓ

눐뉳ꉧ-ꉧ솆ꉧꉧ뉳덱ꉧꙓꙓ

手机扫码快速拨号

手机扫码

产品推荐

免费会员 第7年

苏州寅旭塑化有限公司

联 系 人：邓 先生 (联系时,请说明是在全球塑胶网上看到的)

联系电话：눐뉳ꉧ-ꉧ솆ꉧꉧ뉳덱ꉧꙓꙓ

手机号码：ꉧ솆ꉧꉧ뉳덱ꉧꙓꙓ

公司官网： http://18114591336.51pla.com

所在地区：江苏省 苏州市

主营产品： 塑胶原料及产品, 化工原料及产品,

二维码

扫一扫，加我微信

进入店铺
产品分类
最新产品
商品详情 联系方式

进入手机版

基本参数

牌号 BM70G20HSLX 厂商 杜邦
填充 20%玻纤 热性能 增韧剂热稳定
加工 注塑级，吹塑 产地 中国
形状 颗粒 包装 25KG







Zytel? BM70G20HSLX BK537

NYLON RESIN
PA66-I-GF20
CHARACTERISTICS
Processing
Injection Molding, Blow Molding
Delivery form
Pellets
Special characteristics
Heat stabilized or stable to heat
PRODUCT TEXT

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

 

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

 

Zytel? BM70G20HSLX BK537 is a 20% glass fiber reinforced polyamide 66 for blow molding.

PRODUCT INFORMATION

DRY/COND.
TEST NORM
Resin Identification
PA66-IGF20
ISO 1043
Part Marking Code
>PA66-IGF20<
ISO 11469
ISO designation
ISO 16396-PA66-I,GF20,M1CGH,S14-060
-

REGULATORY

Regulatory Information Sheet (RIS)
SVHC Declaration
ZYTEL - SVHC Statement
Substance of Very High Concern Report

RHEOLOGICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Viscosity number
155/*1
cm3/g
ISO 307, 1157, 1628
Molding shrinkage, parallel
0.5/-
%
ISO 294-4, 2577
Molding shrinkage, normal
0.7/-
%
ISO 294-4, 2577
Melt viscosity , @ 1000 sec-1, 280°C
330/*
Pa.s
ISO 11443
1: Sulfuric acid 96%

MECHANICAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Tensile Modulus
6500/4000
MPa
ISO 527-1/-2
Stress at break
120/75
MPa
ISO 527-1/-2
Strain at break
4/13
%
ISO 527-1/-2
Flexural Modulus
6000/3600A
MPa
ISO 178
Flexural Strength
160/-DS
MPa
ISO 178
Shear Modulus
1400/-
MPa
ISO 6721
Tensile creep modulus, 1h
*/3900
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/3200
MPa
ISO 899-1
Charpy impact strength, 73°F
80/80
kJ/m2
ISO 179/1eU
Charpy impact strength, -22°F
40/-
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 73°F
15/16
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -22°F
8/6
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
7.5/-
kJ/m2
ISO 179/1eA
Izod notched impact strength, 73°F
14/16
kJ/m2
ISO 180/1A
Izod notched impact strength, -22°F
8/6
kJ/m2
ISO 180/1A
Izod impact strength, 73°F
73/-
kJ/m2
ISO 180/1U
Ball indentation hardness, H 961/30
225/-
MPa
ISO 2039-1
Poisson's ratio
0.35/0.36
-
-
A: Assessed
DS: Derived from similar grade

THERMAL PROPERTIES

DRY/COND.
UNIT
TEST NORM
Melting temperature, 18°F/min
260/*
°C
ISO 11357-1/-3
Glass transition temperature, 18°F/min
60/45
°C
ISO 11357-1/-2
Temp. of deflection under load, 260 psi
239/*
°C
ISO 75-1/-2
Temp. of deflection under load, 65 psi
257/*
°C
ISO 75-1/-2
Thermal conductivity of melt
0.2
W/(m K)
-
Spec. heat capacity of melt
2000
J/(kg K)
-

FLAMMABILITY

DRY/COND.
TEST NORM
FMVSS Class
SE
ISO 3795 (FMVSS 302)

OTHER PROPERTIES

DRY/COND.
UNIT
TEST NORM
Humidity absorption, 80mil
1.6/*
%
Sim. to ISO 62
Water absorption, 80mil
5.2/*
%
Sim. to ISO 62
Density
1250/-
kg/m3
ISO 1183
Density of melt
1070
kg/m3
-

INJECTION

DRY/COND.
UNIT
Drying Recommended
yes
Drying Temperature
80
°C
Drying Time, Dehumidified Dryer
2 - 4
h
Processing Moisture Content
≤0.2
%
Melt Temperature Optimum
295
°C
Min. melt temperature
285
°C
Max. melt temperature
305
°C
Max. screw tangential speed
0.2
m/s
Mold Temperature Optimum
90
°C
Min. mold temperature
50
°C
Max. mold temperature
100
°C
Hold pressure range
50 - 100
MPa
Hold pressure time
3
s/mm
Ejection temperature
210
°C

BLOW MOLDING

DRY/COND.
UNIT
Drying Recommended
yes2
-
Drying Temperature
100 - 110
°C
Drying Time, Dehumidified Dryer
≤6
h
Processing Moisture Content
≤0.05
%
Melt Temperature Optimum
290
°C
Melt Temperature Range
285 - 305
°C
Swell ratio
1.3
-
Mold Temperature Range
80 - 120
°C
2: Yes, if moisture content of resin exceeds recommended level

CHEMICAL MEDIA RESISTANCE

Acids
Acetic Acid (5% by mass), 23°C
Citric Acid solution (10% by mass), 23°C
Lactic Acid (10% by mass), 23°C
Hydrochloric Acid (36% by mass), 23°C
Nitric Acid (40% by mass), 23°C
Sulfuric Acid (38% by mass), 23°C
Sulfuric Acid (5% by mass), 23°C
Chromic Acid solution (40% by mass), 23°C
Bases
Sodium Hydroxide solution (35% by mass), 23°C
Sodium Hydroxide solution (1% by mass), 23°C
Ammonium Hydroxide solution (10% by mass), 23°C
Alcohols
Isopropyl alcohol, 23°C
Methanol, 23°C
Ethanol, 23°C
Hydrocarbons
n-Hexane, 23°C
Toluene, 23°C
iso-Octane, 23°C
Ketones
Acetone, 23°C
Ethers
Diethyl ether, 23°C
Mineral oils
SAE 10W40 multigrade motor oil, 23°C
SAE 10W40 multigrade motor oil, 130°C
SAE 80/90 hypoid-gear oil, 130°C
Insulating Oil, 23°C
Standard Fuels
ISO 1817 Liquid 1 - E5, 60°C
ISO 1817 Liquid 2 - M15E4, 60°C
ISO 1817 Liquid 3 - M3E7, 60°C
ISO 1817 Liquid 4 - M15, 60°C
Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C
Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 23°C
Diesel fuel (pref. ISO 1817 Liquid F), 90°C
Diesel fuel (pref. ISO 1817 Liquid F), >90°C
Salt solutions
Sodium Chloride solution (10% by mass), 23°C
Sodium Hypochlorite solution (10% by mass), 23°C
Sodium Carbonate solution (20% by mass), 23°C
Sodium Carbonate solution (2% by mass), 23°C
Zinc Chloride solution (50% by mass), 23°C
Other
Ethyl Acetate, 23°C
Hydrogen peroxide, 23°C
DOT No. 4 Brake fluid, 130°C
Ethylene Glycol (50% by mass) in water, 108°C
1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C
50% Oleic acid + 50% Olive Oil, 23°C
Water, 23°C
Water, 90°C
Phenol solution (5% by mass), 23°C

DIAGRAMS

Viscosity-shear rate Zytel? BM70G20HSLX BK537 1E2 1E3 1E4 Shear rate in 1/s 1E1 1E2 1E3 Viscosity in Pa.s 285 °C 295 °C 305 °C
Shearstress-shear rate Zytel? BM70G20HSLX BK537 1E2 1E3 1E4 Shear rate in 1/s 1E4 1E5 1E6 Shearstress in Pa 285 °C 295 °C 305 °C
Dynamic Tensile modulus-temperature Zytel? BM70G20HSLX BK537 (dry) -100 0 100 200 300 Temperature in °C 1E0 1E1 1E2 1E3 1E4 Dyn. Tensile modulus in MPa 0 0.02 0.04 0.06 0.08 tan d 1E-1 1E0 1E1 1E2 1E3 E'' MPa
Dynamic Tensile modulus-temperature Zytel? BM70G20HSLX BK537 (cond.) -100 0 100 200 Temperature in °C 1E-2 1E-1 1E0 1E1 1E2 1E3 1E4 Dyn. Tensile modulus in MPa 0 0.01 0.02 0.03 0.04 0.05 0.06 tan d 1E-3 1E-2 1E-1 1E0 1E1 1E2 1E3 E'' MPa
Stress-strain Zytel? BM70G20HSLX BK537 (dry) B - Break 0 5 10 15 20 Strain in % 0 50 100 150 Stress in MPa B B B B B B B B B B -20 °C 0 °C 23 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C 220 °C
Stress-strain Zytel? BM70G20HSLX BK537 (cond.) B - Break 0 5 10 15 20 Strain in % 0 50 100 150 Stress in MPa B B B B B B B B B -20 °C 0 °C 23 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Secant modulus-strain Zytel? BM70G20HSLX BK537 (dry) B - Break 0 5 10 15 20 Strain in % 0 2000 4000 6000 8000 Secant modulus in MPa B B B B B B B B B B -20 °C 0 °C 23 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C 220 °C
Secant modulus-strain Zytel? BM70G20HSLX BK537 (cond.) B - Break 0 5 10 15 20 Strain in % 0 2000 4000 6000 8000 Secant modulus in MPa B B B B B B B B B -20 °C 0 °C 23 °C 60 °C 90 °C 120 °C 150 °C 180 °C 200 °C
Stress-strain (isochronous) 23 °C Zytel? BM70G20HSLX BK537 (cond.) 0 1 2 3 4 Strain in % 0 20 40 60 Stress in MPa 1 h 10 h 100 h 1000 h
Creep modulus-time 23 °C Zytel? BM70G20HSLX BK537 (cond.) 1E0 1E1 1E2 1E3 Time in h 1000 2000 3000 4000 5000 Creep modulus in MPa 10 MPa 20 MPa 30 MPa 40 MPa 50 MPa 56 MPa
Stress-strain (isochronous) 150 °C Zytel? BM70G20HSLX BK537 (dry) 0 2 4 6 8 Strain in % 0 10 20 30 40 50 Stress in MPa 1 h 10 h 100 h 1000 h
Creep modulus-time 150 °C Zytel? BM70G20HSLX BK537 (dry) 1E0 1E1 1E2 1E3 Time in h 0 1000 2000 3000 Creep modulus in MPa 10 MPa 20 MPa 30 MPa 40 MPa 42 MPa
Specific volume-temperature (pvT) Zytel? BM70G20HSLX BK537 0 100 200 300 400 Temperature in °C 0.7 0.8 0.9 1 Spec. volume in E-3 m3/kg 0.1 MPa 40 MPa 120 MPa 200 MPa
Tensile modulus-temperature Zytel? BM70G20HSLX BK537 (dry) -100 0 100 200 300 Temperature in °C 1E3 1E4 Tensile modulus in MPa
Tensile modulus-temperature Zytel? BM70G20HSLX BK537 (cond.) -100 0 100 200 Temperature in °C 1E3 1E4 Tensile modulus in MPa
LTHA-Stress at Break 0 mm Zytel? BM70G20HSLX BK537 0 1000 2000 3000 Time in h 0 50 100 150 StressB in MPa 160 °C 180 °C 200 °C 210 °C 220 °C 230 °C
LTHA-Strain at Break 0 mm Zytel? BM70G20HSLX BK537 0 1000 2000 3000 Time in h 0 1 2 3 4 5 6 StrainB in % 160 °C 180 °C 200 °C 210 °C 220 °C 230 °C


该企业其他产品

  • 供应 英力士ABS Lustran 556 低光泽 ￥15.5元

  • ABS EGP-7 英力士ABS￥15.5元

  • 英力士高光ABS Lustran 451 ￥18.5元

  • 供应Terluran ABS GP-22 GP-35 英力士标准通用级￥13.5元

  • 锦湖ABS HU600PF喷涂级￥21.5元

  • 锦湖ABS H2938L耐热喷涂级￥21.5元

  • 锦湖ABS HU651耐热耐候￥21.5元

  • 锦湖ABS HU601耐热￥21.5元

供应 杜邦BM70G20HSLX 相关产品

猜你在找

免责声明：以上展示的供应 杜邦BM70G20HSLX 信息由苏州寅旭塑化有限公司自行提供，内容的真实性、准确性和合法性由发布企业负责， 全球塑胶网对此不承担责任。
风险防范建议：为保障您的利益，建议优先选择速购通会员
手机版：供应 杜邦BM70G20HSLX
更新产品链接为：https://www.51pla.com/html/sellinfo/435/43577446.htm

全球塑胶网 杭州酷软科技有限公司 版权所有 © 2008-2020 www.51pla.com 浙ICP备13013211号 SEO 找商网

咨询热线:400-668-0255 公司传真：0571-87205660

浙公网安备 33010602002378号