光谱仪 金属分析仪 实谱厂家

光电直读光谱仪全面测试钢铁和有色金属材料元素的通用型仪器，可以满足包括：Fe基体、Cu基体、Al基体、Ti基体、Pb基体、Mg基体、Co基体等基体要求，是金属元素分析的最优选择。

全谱分析技术，方便配置更多基体和元素，方便在用户现场补充配置

仪器体积小巧，对实验室空间要求低

全天候工作，具有优异的稳定性和可靠性

实谱直读光谱仪描述：

DESCRIPTION OF THE COMPONENTS:

1.光学系统OPTICAL SYSTEM

v多块高性能CCD检测器系统，根据应用需要最多达16块CCD检测器

Multi High Resolution CCD Multi detectors (Charge Coupled Device) system with up to 16 CCD solid state detectors depending on the application

v每块CCD 3,648 像素

Each CCD has 3,648 active elements (pixels equivalent)

v58,368 像素的分辨率(16 x 3,648 像素)

Resolution of full range 58,368 active elements (pixels) (16 x 3,648 pixels)

v高性能全息衍射光栅，光栅刻线2400条/mm

High luminosity holographic grating with 2400 grooves per mm

v温度稳定系统

Stabilized against fluctuations in temperature

v采用特殊材料应对漂移

Special material for drift free

v焦距：500 mm

Focal length 500 mm for all optical systems

v谱线波长：190 - 800 nm由衍射光栅的选择决定。光栅的选择由制造商根据分析元素和分析程序来决定

Spectral optical wavelength 190 - 800 nm depending on selected diffraction grating. Grating selection is made by manufacturer depending on analytical programs and elements

v全光学系统自动描迹

Automatic profiling full optical system

v密闭的光学室可以避免灰尘、光线的干扰

Air tight optical chamber sealed against light and dust.

2.谱线OPTICAL LINES

vSCNF覆盖了全元素分析范围，可根据具体需要分析相应的元素

SCNFcan be equipped with all the needed spectral lines basing on analytical programs requested

v光学系统包括固态检测器能够测量样品所发出的全谱

Optical system includes full range multi-chanel CCDs solid state detectors able to measure the whole optical spectra emitted by all elements in the samples

v并且为将来可能的升级，增加分析线（元素）方便

It’s always possible to integrate new spectral lines (elements) for future upgrade

v可现场增加分析程序

Possible on site addition of analytical programs

3.控制、电子采集和数据读出系统CONTROL, ACQUISITION ELECTRONICS and READ OUT

v电子系统具有微处理器控制的多通道积分和数据系统采集功能

Electronic system with integrators multi-channels and Data System Acquisition PC controlled by microprocessor

v高速16位模数转换器

High speed 16 Bit ADC

vISP混合信号Flash微控制器100MHz

Mixed Signal ISP Flash MCU 100 MHz

v多种连接源

Serial Source Interface

v高速读出及高速USB借口支持快速数据控制与处理系统

High speed readout with high speed interface USB for fast data processing and controlling the system

v最多16块CCD模块，由制造商根据应用情况选择

Up to 16 input for CCD modules. CCD modules selected by manufacturer

4.火花源SPARK SOURCE

v全自动控制火花源

Full automatic controlled source

v半导体控制放电激发

Solid state spark source semiconductor controlled.

v1 到100 A等离子体电流

Plasma current from 1 to 100 A

v放电参数由密码保护

The discharge parameters are protected by password

v特别的分析要求可有不同的激发参数

Variable discharge parameters for individual analytical tasks

v火花光源放电稳定，不受供电系统波动的影响

The spark source is stabilized against variations of the power supply

v激发参数由激发线和分析程序标定和控制

Excitation parameters configurated and controlled according to excitation lines and analytical programs

v火花频率: 200到to 1000 Hz (可控)

Spark Frequency: 200up to 1000 Hz (controllable)

v火花持续时间10-10000 us (可控)

Spark time 10-10000 us (controllable)

5.火花台SPARK STAND

v开放式的火花台可以分析测试重达20Kg的各种形状的样品

The open universal spark stand allows to analyse samples up to 20 Kg and suitable for samples in different forms

v电极易于拆卸维护

The electrode is easily removable for maintenance

v氩气吹扫火花台，低氩气消耗

Argon flushed spark stand with minimum consumption of Argon

v使用便捷的样品夹支持快速样品更换

Quick change with simple designed sample clamp for fast sample throughput

v不同样品的适配器可满足各种样品的需求（可选）

Small adapters for different samples are also available for various kind of samples(options)

6.软件: 分析软件、校正软件、统计功能

SOFTWARES: ANALYTICAL SOFTWARE, CALIBRATION SOFTWARE AND STATISTIC FUNCTION

计算每种元素的校正曲线需考虑到各种基体（参考线）。

Forcalculation of calibration curves for each elements into consideration of various matrixes (references) available for the calculation of analytical results.

软件功能:Software allows for

分析校正软件：ANALYTICAL AND CALIBRATION SOFTWARE:

·智能化: 用一组标样即可完成标准化

SMARTCAL : standardisation using a single sample

·便捷的用户图形界面Easy GUI ( Graphic Interface User) system

·创建或修改分析程序Creation or modification analytical programs

·常用的操作功能键Function keys for routine operations

·可选择的输出方式( 强度，强度比，未校正的浓度，校正后的浓度等)

Output unit selectable (intensities, intensities ratios, uncorrected concentrations, corrected concentrations etc)

·可选择的浓度单位( ppm, % )Selectable concentrations units ( ppm, % )

·通用标准化Global recalibration

·微型标准化Mini calibration ( Type recalibration)

·校正元素间的干扰Correction of inter elemental interferences

·自动标准化Standard deviation and relative standard deviation functions

·标准偏差和相对标准偏差功能Repeat or reject one or more discharges

·合金类型鉴定（UNI, ISO, DIN, EN, ASTM, JIS, BS, 等.）

Determination type of alloy (quality name) according to the requested norm (UNI, ISO, DIN, EN, ASTM, JIS, BS, etc.)

·标样库Standards library

·国际标准物质库International norms library

·牌号鉴定Quality identification

·支持C当量或其他参数的计算

Calculation of Carbon equivalence or any other parameter consequent to the analysis

·可标记超出工作曲线范围的元素分析结果Signalling of out prefixed range elements

·具有根据分析时间或激发次数自动再校正功能

Possibility of automatic signal for recalibration depending on time or on spark number

统计功能软件：STATISTIC SOFTWARE functions:

·统计计算Statistic calculation

·可打印所有激发结果或是最多100次的激发平均结果，及其标准偏差和相对标准偏差

Printing of all discharges or only the average of up more than 100 discharges, standard deviation and relative standard deviation

·硬盘存储数据便于今后的研究分析

Filing on Hard Disk of all data with possibility of researching various keys

·可连接外部计算机或中心系统Connection to external computers or central/server system

·综合特性：General properties:

*32位应用软件Software with 32bit application

* 字体、字体大小设定Fonts, font-sized setup up to setting on screen

* 日期/时间格式基于Windows设置Date/time formats compatible with Windows setup

* 多种输出功能或对话操作的快捷图标

Various icons for quick access to output functions or dialogues

* 下拉式菜单操作文档、筛选、观察Drop lists for File, Filter, View

* 元素数量不受限unlimited number of elements

* 样品识别域数量不受限unlimited number of sample id fields

* 帮助文件Help task

* 手动转换MS-Word 文件or PDF文件(Acrobat Reader)

Manual as MS-Word file or PDF (Acrobat Reader)

* 全自动控制，自动诊断功能Fully automatic control and automatic diagnostic function

·数据库：Database:

* 输入、输出Import, Export

* 仪器与通信间的接口Communication Instrument interfacing

* 文件的共享、传输File for sharing, transfering

* 输出文件、统计程序Export to files, statistic programs

·文档：Documentation:

* 标准输出、页面设置logo或信头功能

Standard print, page set-up with logo or letter head functions

* 打印设置、打印预览Printer set-up, Print Preview

* 数据打印、工作曲线打印Data printing, curves printing

·分析管理：Analyses management:

* 数据库管理和控制Database management and controller

* 多窗口支持多任务工作Multiwindows for multi tasks working

* 不限制察看分析结果列表的数目Unlimited number of views for analyses table

* 所有数据库域的查询功能Search function for all data fields in view

* 分析的编辑功能Edit function for analyses

* 分选结果时发出“滴滴”声Click’n’mark analyses selection

* 元素、大小、小数点的显示格式Display formats with elements, forms, dimensions, decimals

* 分析结果复制功能Copy function

* 结果的单位和小数点选择（不限数目）Units dimensions (unlimited number)

* 手动分析结果输入和样品鉴别Manual analysis input and sample identification

* 可选的样品码输入使用条形码阅读器Optional sample code imput using bar code reader

* 所有样品识别和元素域的操作一目了然Transparent access thru all sample-ids element fields

* 适用于所有分析结果的查询和输出Applicable for all analyses views and outputs

* 牌号数据库Quality database

* 牌号控制功能Quality control function

* 牌号识别功能Quality identification

*分析结果列表中牌号控制的显示Display of quality control in the analyses table

*收到的已存在牌号的自动检测Automatically check of received qualities for existence

*展公式编辑功能Formula editor with extended possibilities

* 自定义公式编辑Formula calculation

* 数字统计功能(序号, 加合, 平均, 绝对/相对 标准偏差, 最大, 最小, 范围)

Numeric statistics (no., sum, average, abs./rel std dev., min, max, range)

*步宏编辑Macro programs, with asynchronous execution

* 异步宏排序Macro sequences, with asynchronous execution

* 自动项目或预定宏执行的任务服务器

Job server for automatic event, or scheduled macro execution

7.尺寸 :DIMENSIONS

尺寸(Dimension): P55x L75x H65 cm

重量(Weight) : 约 80 Kg

8.电源:POWER SUPPLY :

110/220V/- 10%、单相（single phase）、50/60 Hz

16 A、 1.0 KVA

10. 其他:OTHER CONDITIONS :

工作温度范围（Working temperature range）: 22°C -28°C

湿度范围（Working humidity）: 小于75%

氩气溯流压力（Argon upstream pressure）: ~200 bar

氩气输入压力（Argon inlet pressure）: ~3.5 bar

氩气质量（Argon quality）(min.) : 5.0 (99.999% 氩)

氩气流量（Argon flow rates）

* 待机（Stand-by）: 0.001l/小时

* 常流量（Constant flow）: 0.5 l/小时

* 分析流量（Analytical flow）: 180l/小时(3lt/分析)